Modifying LPVO to meet 1x scope requirements

[Timberline001]

But do you really want to take time off work to argue that in court?

Sent from my SM-S901U using Tapatalk

If I go this route I’ll get it approved before I use it. I see no reason it wouldn’t be legal. Non telescopic is non telescopic.

 

[realunlucky]

The intent of the change was to limit technology on muzzleloaders, good luck trying to get though the approval process.

Sent from my SM-S926U using Tapatalk

 

[Timberline001]

The intent of the change was to limit technology on muzzleloaders, good luck trying to get though the approval process.

Sent from my SM-S926U using Tapatalk

I’m not worried about it. As it is right now no 1x scope is available commercially. The remaining $150 crossfires are on eBay for $400.

 

[CorbLand]

I’m not worried about it. As it is right now no 1x scope is available commercially. The remaining $150 crossfires are on eBay for $400.

https://www.sportsmans.com/hunting-gear-supplies/optics-binoculars-scopes-rangefinders/rifle-scopes-red-dots/vortex-crossfire-ii-1x-24mm-muzzleloader-scope-v-plex-moa/p/1386620

https://store.epicoutdoors.com/products/vortex-crossfire-ii-1x24-rifle-scope

 

[Timberline001]

w

https://www.sportsmans.com/hunting-gear-supplies/optics-binoculars-scopes-rangefinders/rifle-scopes-red-dots/vortex-crossfire-ii-1x-24mm-muzzleloader-scope-v-plex-moa/p/1386620

https://store.epicoutdoors.com/products/vortex-crossfire-ii-1x24-rifle-scope

It literally came back into stock this morning.

 

[CorbLand]

w

It literally came back into stock this morning.

But they are commercially available.

 

[Timberline001]

But they are commercially available.

I’m sure they’ll be gone soon.

 

[Timberline001]

I guess I’ll have to look into red dots more and test one out before I jump into this route. I have been against using one but in all honesty I know nothing about them and should probably use one before I denounce it.

 

[sbaker0029]

I would pickup a Primary Arms SLx 1x prism. Etched reticle with holdovers.
I have the 3x and it's been great.
I'd say it's probably your best bet and I don't think you'll be disappointed.

 

[Timberline001]

I would pickup a Primary Arms SLx 1x prism. Etched reticle with holdovers.
I have the 3x and it's been great.
I'd say it's probably your best bet and I don't think you'll be disappointed.

Damn, they’re not too expensive either! I think I’ll give one a go.

 

[Timberline001]

I would pickup a Primary Arms SLx 1x prism. Etched reticle with holdovers.
I have the 3x and it's been great.
I'd say it's probably your best bet and I don't think you'll be disappointed.

Is the CQB reticle the one you’re referring to?

 

[sbaker0029]

Is the CQB reticle the one you’re referring to?

Yeah the acss raptor. So not your traditional holdover style but it works. Used it on steel out to 300yds with my AR.

 

[Timberline001]

Yeah the acss raptor. So not your traditional holdover style but it works. Used it on steel out to 300yds with my AR.

Anything’s better than the 2.5 MOA duplex the vortex crossfire has. Thank you

 

[sbaker0029]

Damn, they’re not too expensive either! I think I’ll give one a go.

They run blemish sales and usually 10% or 12% off frequently too. I picked up the 3x on a blemish sale for about $225 shipped.

 

[Timberline001]

They run blemish sales and usually 10% or 12% off frequently too. I picked up the 3x on a blemish sale for about $225 shipped.

Looks like the raptor reticle is only available in the magnified models. There is some more simple bdc reticle available though in their 1x models. Just trying to find where they specify the measurements of the reticles so I can know how useful they’ll be with the muzzy.

 

[sbaker0029]

Looks like the raptor reticle is only available in the magnified models. There is some more simple bdc reticle available though in their 1x models. Just trying to find where they specify the measurements of the reticles so I can know how useful they’ll be with the muzzy.

Dang didn't realize it was only on the magnified versions.
Looks like the acss Gemini on the 9mm specified model would be easier to use. The download manual doesn't give specifics on size or distance between.
Might give them a call and ask. The customer service reps are pretty friendly and knowledgeable.

 

[Timberline001]

Dang didn't realize it was only on the magnified versions.
Looks like the acss Gemini on the 9mm specified model would be easier to use. The download manual doesn't give specifics on size or distance between.
Might give them a call and ask. The customer service reps are pretty friendly and knowledgeable.

Yeah that’s what I was thinking as well. I’ll call them later.

 

[sbaker0029]

Let us know what you find out and how it works if you order one.
You might have just unlocked a new level to 1x optics muzzleloader.

 

[Timberline001]

Let us know what you find out and how it works if you order one.
You might have just unlocked a new level to 1x optics muzzleloader.

I emailed them, I’ll post what they say.

 

[Mojave]

get an aimpoint tube 1x sight. Works like a champ.