McMillan Mountain Tracker LR - Tikka T3 Dev Project

[HandgunHTR]

I will be curious to see how quickly their Customer Service calls to take the formal orders.

Once folks start receiving these calls, update this group.

I think I have settled on HEC1-Sage with a Benchmark #5 contour. I have not decided If I want the Carbon shell over fiberglass considering it will be fully painted.

For me it will be 1) Carbon, 2) HLS Camo Dark Pine or Woodland as my action and barrel are burnt bronze 3) D-18 barrel contour

 

[AU.MASHnKS]

For me it will be 1) Carbon, 2) HLS Camo Dark Pine or Woodland as my action and barrel are burnt bronze 3) D-18 barrel contour

Nice! My gun is currently sporting a D18 factory barrel, but I am buying with a re-barrel in mind.


Sent from my iPhone using Tapatalk

 

[HandgunHTR]

Nice! My gun is currently sporting a D18 factory barrel, but I am buying with a re-barrel in mind.


Sent from my iPhone using Tapatalk

I am rebarreling as well, but I really like the D-18 profile, so I am replacing with that contour as well.

 

[bwp]

Can anyone comment on the fiberglass compared to carbon that McMillan offers?

 

[WeiserBucks]

Can anyone comment on the fiberglass compared to carbon that McMillan offers?

Functionally they're the same, CF will just be lighter.

 

[bwp]

Functionally they're the same, CF will just be lighter.

Stiffness is similar? How much weight difference are we talking about?

 

[WeiserBucks]

Stiffness is similar? How much weight difference are we talking about?

I can't tell a difference in stiffness, I think the CF saves about 8 oz but I could be off there.

 

[bwp]

I can't tell a difference in stiffness, I think the CF saves about 8 oz but I could be off there.

Thanks. I’ll probably go with the fiberglass for the extra weight/recoil management if I land on this stock.

 

[Harvey_NW]

Thanks. I’ll probably go with the fiberglass for the extra weight/recoil management if I land on this stock.

I'm going carbon fiber and building a lightweight 7 PRC because I'm a heathen. Might as well put some recoil into a stock that's designed to combat it

 

[Qholum37]

I'm going carbon fiber and building a lightweight 7 PRC because I'm a heathen. Might as well put some recoil into a stock that's designed to combat it

Same! Got a 20” taperless .810 barrel being made for it which should add just a bit of weight compared to other options.

 

[sierracharlie338]

Same! Got a 20” taperless .810 barrel being made for it which should add just a bit of weight compared to other options.

That’s my favorite profile 20” and 810 at muzzle. Curious to hear your thoughts on the taperless when you get it. My barrel is not a taperless but I may end up with that profile for a rebarrel.

 

[sierracharlie338]

Thanks. I’ll probably go with the fiberglass for the extra weight/recoil management if I land on this stock.

I like the fiberglass options personally. I have an A5 on a tikka sporter and really like the weight but would probably like a little more low profile stock if I’m being honest

 

[bwp]

I like the fiberglass options personally. I have an A5 on a tikka sporter and really like the weight but would probably like a little more low profile stock if I’m being honest

Is the fiberglass “bigger” than the carbon versions?

 

[Qholum37]

That’s my favorite profile 20” and 810 at muzzle. Curious to hear your thoughts on the taperless when you get it. My barrel is not a taperless but I may end up with that profile for a rebarrel.

Good to hear that as I couldn't find all that much info for the 810, plenty of info on the 750 though. It is a slightly modified taperless - I am having the shank shortened up a bit because they are always pretty long and look a little funny and it should shave a few ounces off as well.

 

[ndlawrence]

That’s my favorite profile 20” and 810 at muzzle. Curious to hear your thoughts on the taperless when you get it. My barrel is not a taperless but I may end up with that profile for a rebarrel.

What does this profile weigh?

 

[sierracharlie338]

Is the fiberglass “bigger” than the carbon versions?

No I just meant the profile of the A5, its kinda blocky.

 

[sierracharlie338]

What does this profile weigh?

Ya know I’m not positive I may have to pull it and see when I get some time. It’s probably heavier than most folks prefer round these parts though.