- Banned
- #1,881
PredatorSlayer
WKR
- Joined
- Jul 20, 2019
- Messages
- 3,034
Or…maven could just fix it? It’s a design flaw.I would recommend hockey tape over the checkering or sanding/filing down the points. Silicone isnt going to stay pit
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Or…maven could just fix it? It’s a design flaw.I would recommend hockey tape over the checkering or sanding/filing down the points. Silicone isnt going to stay pit
Or…maven could just fix it? It’s a design flaw.
I already did.I offered a cheap / fast option to agressive checkering. Didn't suggest anything else
If you think Maven should take your scope back or manufacture new turrets and ship them out for free to "fix" this "flaw", by all means email them
Just keep working it. They do loosen up over time.Anyone know a trick on how to "loosen" the Paralax knob just a bit on this scope? Tight is good, but these are almost ridiculous. I have 3 scopes and they are very difficult to adjust. Wondering if there is anything to do.
I also dont think the flaw is the turrets as much as it is the ease of spinning said turrets. My recommendation to them in the email was to leave the turrets how they are and make it harder to spin them.I offered a cheap / fast option to agressive checkering. Didn't suggest anything else
If you think Maven should take your scope back or manufacture new turrets and ship them out for free to "fix" this "flaw", by all means email them
I like the Maven more.Maven RS1.2 2.5-15x44mm or Nightforce SHV 4-14x50mm F1? which is the better option?
Where are you at in CO?Maven RS1.2 2.5-15x44mm or Nightforce SHV 4-14x50mm F1? which is the better option?
Thanks for that link! I will dive into that review. Let me know if there are more reliable scopes in the 800-1400$ price range i should look at. Im up in Greeley.Where are you at in CO?
I wrote the homepage review here essentially comparing the RS1.2 to my many tried and true SHVs. https://www.rokslide.com/maven-rs1-2-riflescope-review/
The reticle, 4-5oz difference, and the way the zero stop/set works are the stand out differences to me. Those things matter to some folks a lot, some don't care.
We still own all of the SHVs we had before the RS1.2 arrived, and we have a few RS1.2s as well. Other things worth consideration that may or may not matter to you and are subjective...
-Reputation of brand
-Availability of repair/warranty
-"Proven" ability of the specific models
-In the case of @KickinNDishin (my wife), availability of same model or same reticle models to put on "trainer" rifles.
-Customizable colors
Thanks for that link! I will dive into that review. Let me know if there are more reliable scopes in the 800-1400$ price range i should look at. Im up in Greeley.
I've had both and the maven is betterI like the Maven more.
Yeah I understand that. I have Run Vortex Vipers up to this point and now that I have the budget I just want something bombproof that will hold zero. I like the SWFA but i am a MOA guy so that wont work since their only model with a paralax adjustment is MRAD only. Never heard of LRHS2....If you want to look at the two you asked about side by side at the range, or just borrow them for a bit (with deposit...), I am in Morrison.
I also have fixed SWFA and a new to me LRHS2 on hand.
Frankly, just pick whichever your gut says to pick. The analysis paralysis won't get better by looking through any, and will only go away once you have enough experience to know what you do and don't prefer or what you learned you don't care about at all.
Would you say it holds zero better than the nightforce?I've had both and the maven is better
It’s not nearly as tested. But none of us here have had issues that I’m aware of. I like it more for the reasons @sndmn11 stated.Would you say it holds zero better than the nightforce?
Pick the reticle that suits your sensibilities. I have a lot of time with both scopes and they're both good.Maven RS1.2 2.5-15x44mm or Nightforce SHV 4-14x50mm F1? which is the better option?