Looking for Adhesive Stick On Stencils to Camo a Synthetic Rifle Stock have any Suggestions?

[KnightExtreme]

Looking for some different patterns maybe a "Hex" in 7 mm shape that comes in an Adhesive Stick on / Removeable reuseable Stencil. Where can you find them? Look at a few websites and order a "Tree Bark" design but they are slow to get the order shipped. Got the email stating it was "Shipped" but it has been 3 days and USPS does not have it yet just that the "Label Was Created" Looking to try a couple patterns like a Hex Design but few offer them in a Adhesive Type Stencil. Most are Mylar and don't lay flat so I get bleedover from spray painting. Thinking a Sticker will be a better way to get clean lines.
Where might I find these Adhesive Type Stencils?
Thanks
KE

 

[JMundy84]

https://a.co/d/0ipKwmU3
I ordered these ones haven't tried them out yet but they seem like they will work good

 

[Steve300xcw]

Guy can do pretty good by just spraying over a handful of long grass, leaves etc

 

[SDHNTR]

freedom stencils

Freedom Stencils | Heat Resistant Vinyl Stencils

Shop our large selection of heat resistant vinyl Cerakote & Duracoat Stencils for Camouflage and Custom Art. Fast shipping and competitive prices!

www.freedomstencils.com

 

[BRTreedogs]

If you want a hecx, pattern just buy a “sniper veil”
That’s what all the cool kids use.

 

[KnightExtreme]

Thanks I am looking for something different than the standard Camo Shapes ( like old military )
Will take a look at Freedom Stencils (Much Appreciated for the link)! Being the stock is not "flat" any kind of lay over will not have good clean defined lines. An adhesive type for me would be best and be able to layout out what I am hoping for as to a custom type pattern. And Leave each on and paint over each different layer with added adhesive stencil till I have the 3 maybe 4 different colors have been applied and then remove all the stencils. I have tried lay over stencils and it did not turn out well. When I have apply masking tape made stencils they did but I am hoping to for custom hex pattern. see attached.
Appreciate all the input. Thanks for your posts.
KE

 

[FOS373]

I’ve used the freedom stencils hex, they are a good product. That being said, mine was on a flat side rifle. Also, the sheet is only so long ~ standard letter, so if you’re doing a full rifle length you will need to line them up well.

 

[KnightExtreme]

Understood, I was hoping to find 1 that could make 2 that are 32 lon x 7 wide. And put each 1 on a side.
There are few companies, I also found today (TactWrap) but they are also a standard sheet size of paper or slight larger but nothing close to 32 in length. Few want to make a custom size Stick On Stencil. So I will have to try and align 2 maybe 3 to get the length as it is just maybe 30 inches but wanted a little extra just in case.
Oh well my painting is on hold till I can get a Hexagon Pattern and try and align to make it look like 1 standard over all pattern. Waiting on freedom stencil sent an email asking what size the hexagon is looking for something 6 or 7 mm in size. Will just wait and see. Hard to judge the hex shape size?
Thanks for your post!
KE

 

[Weldor]

Try local paint shop, (car or custom) some have computer cut stencils. Done by the machine right in front of you. It looks like a giant plotter machine. the stencil is programmed in the machine cuts it. It is peel and stick.

 

[KnightExtreme]

Haven't been into auto stuff in 40 years so my knowledge of paint shops now is limited. Done some searches for any that offer making up custom stencils and none local populated - some out of state but they aren't willing or too high cost for an adhesive stncil (1 wanted 110.00 plus S&H for 1 and was not reuseable (30 x 6 inches)) hoped to find 1 to fit a rifle stock overall so 2 would be needed. Might have to attempted to piece / align a few together. As most are size of a sheet of paper nothing near 30 inches... Looks like my option is "Freedom Stencils" as their are 11 x 7 in size... (guess custom means high cost!)
KE

 

[rogerdoger]

https://www.etsy.com/listing/1762419515/hexagon-hex-camo-high-heat-vinyl-stencil

I have had good luck finding stencils in Etsy, some cheaper options.

 

[KnightExtreme]

Thanks!
KE

 

[Weldor]

I had 2 made for my address signs about 5 years ago . $20 bucks, crazy how prices have skyrocketed.

 

[KnightExtreme]

Yea everyting you think you can afford is not even close... ( Saw a This Old House Article stating it won't cost more than maybe $23K to remodel a complete (Bathroom from 2024) Had 3 contarctors give me a Quote 1 was only going to do part of the work but no Walkin Shower door, the second was going to do it all and do it with ceramic tile remove all the walls & ceiling- Started at $38 K but he knocked down to $32.5 K the 3rd started at 32K but no ceramic tile - not walls or ceiling replaced using a waterproof panels and they were going to put a vinly flooring (looks like tile over the existing tile floor when I ask for a complete bath remodel). And they got down to $27 K but I had to sign on the spot otherwise it would be $30K. So what you think will be close is nowhere near that! Still hoping to find 1 for a complete remodel in 24k maybe 25K with new wall & floor tile and a walkin shower removing all the walls / ceiling but I am dreaming! Nothing is low cost for sure...
Thanks for your post!!!
KE

 

[43.6N]

I got you bro:
M90 Swedish splinter camo stencils:

M90 Swedish Splinter Camouflage Stencil Kit

Our Swedish M90 Splinter Camouflage Stencil Packs are machine cut on High Quality, Heat Resistant, Low Tach Adhesive Vinyl Paint Mask. Perfect for use with Cerakote, DuraCoat, KG Gunkote, Krylon, Etching, and More!

www.freedomstencils.com

 

[KnightExtreme]

This is the stencil I am looking for;

Hexagons

The Hexagons Stencils are machine cut on High Quality, Heat Resistant, Low Tach Adhesive Vinyl Paint Mask. Perfect for use with Cerakote, DuraCoat, KG Gunkote, Krylon, Etching, and More!

www.freedomstencils.com

KE

 

[Weldor]

Just did a quick check on Amazon, they have a ton of stencil cutters. Check it out The 28 inch one is the one the shop had that made mine. but there are way cheaper ones for one time use on there.