Let's See Your Semi-Custom Tikka Builds

[gabenzeke]

My newer ones. 22-250, VG, SWFA 3-15, Hawkins LR hybrids, running 88gr ELDM.

View attachment 815784

6mm Creed, PBB 22” 1-7.5”, VG, LRHS, shooting 115 DTACS

View attachment 815787

What velocity are you getting on the 6 creed?

Sent from my Pixel 6 Pro using Tapatalk

 

[The Harbor Master]

Not sure if it's just the angle of the picture but looks like the recoil lug isn't seated all the way since the bottom of barrel isn't parallel with the forend.

My exact thought at first glance. Maybe you're right and the angle of the pic is just weird

 

[Tanner]

What velocity are you getting on the 6 creed?

Sent from my Pixel 6 Pro using Tapatalk

So far my dope has them going 2850 but I haven’t shot them over a chrono yet. Only have about 20 rounds through it. Hoping to finish out around 2900-2950, or 2850 if I cut the barrel to 18-19”.

 

[littlebigtine]

Not sure if it's just the angle of the picture but looks like the recoil lug isn't seated all the way since the bottom of barrel isn't parallel with the forend. I know I've done this several times with my bravo. Not sure if it's a thing with the echo.

Nice looking setup! How do you like the echo?

I removed some material off the forend. Theres a little more flex then id like in the stock and the magnum taper could touch depending on how Id load into the rifle. Overall the guns shooting great in the echo and for that $300 price point its hard to beat

 

[Stearinlys]

Stainless T3 chambered in 6CM (18” barrel threaded 5/8-24)

Tikka missed the boat on this one. If they’d offered this as factory configuration 3 years ago, they would’ve sold a pile of them by now.

View attachment 807972
View attachment 807973

Beautiful, what trigger guard is that?

 

[Antares]

Beautiful, what trigger guard is that?

Mountain Tactical

https://www.mountaintactical.com/shop/tikka-t3t3x-billet-bottom-metal

 

[ReaptheHeat]

Just got the Peak 44 Blacktooth, 19.4 oz on my scale... Though dry fitting there is a 1/8 in gap on either side of the barrel in the taper area. I ordered the T3X Lite contour and measured the stock inlet dimensions compared to their specs and it lined up with what they had sent me. Just seems a little big.

 

[HighUintas]

Just got the Peak 44 Blacktooth, 19.4 oz on my scale... Though dry fitting there is a 1/8 in gap on either side of the barrel in the taper area. I ordered the T3X Lite contour and measured the stock inlet dimensions compared to their specs and it lined up with what they had sent me. Just seems a little big.

Just means the stock is lighter and easier to fish crap out of the barrel channel if it gets in there