Let's See Your Semi-Custom Tikka Builds

[Throwin Darts]

What magazine are you running with this setup?

It’s the MDT Polymer AICS 5 round mag in the pic. I’m thinking about getting the 3 round version as well because it sits flush with the bottom of the chassis

 

[Steel Rain]

They are the LOW rings. I also have the UM level on it as well. If you order some rings from UM, might as well get the level.

I have UM Lows, same scope, and same stock. I think I’d like the mediums with this stock to clear the hand guard fore end.

 

[redtop65]

Made a couple changes this week. Picked up a Trijicon Tenmile HX 3-18x50 and dropped it in an Mesa Altitude stock. Finished for now until I rebarrel it this winter. View attachment 452054

What does the rig weigh?

 

[BigBelle]

 

[bpitcher]

Finished up my 6 CM build.

18" PVA .750 taperless,1/7 twist, 5 spiral flutes
UM Bolt knob, rings, and level
Stockys VG
Trijicon credo 2.5-15
OCL Hydrogen K




Took it to the range today with a box of factory Hornady 103 ELDX. 5 Shots to zero and confirm.

Shots 5-15


Shots 15-20

 

[sierracharlie338]

Finished up my 6 CM build.

18" PVA .750 taperless,1/7 twist, 5 spiral flutes
UM Bolt knob, rings, and level
Stockys VG
Trijicon credo 2.5-15
OCL Hydrogen K


View attachment 830509

Took it to the range today with a box of factory Hornady 103 ELDX. 5 Shots to zero and confirm.

Shots 5-15


Shots 15-20

Great spec’d build! Very similar to what I’ll be building for a next project.

 

[Packmansion]

Tikka t3x
McGowen 7 Saum prefit bartlein 3B contour 24 inch
Salmon river solution brake,20moa rail and arca pic rail
Stockys vg hunter
Arken EPL-4
Warne hyperlite rings

How do you like the EPL-4

 

[Harronek]

Not much of a Semi Custom build compared to some of the rifles on show here .
This was and still is a fun budget build .
This is my old T3 that was a .223
When the barrel finally gave up I rebarrelled to a 6x45 ( 6mm223 )

IBI 1-8 twist barrel , 22 inch
Waters Magazine that allows an OAL length of 2.6 inches
Found a green Super Varmint stock for cheap
1.5 pound trigger spring

Shoots Sierra 85hpbt at 2865 fps
Averages 0.5 moa

 

[Brontosaurus]

Not much of a Semi Custom build compared to some of the rifles on show here .
This was and still is a fun budget build .
This is my old T3 that was a .223
When the barrel finally gave up I rebarrelled to a 6x45 ( 6mm223 )

IBI 1-8 twist barrel , 22 inch
Waters Magazine that allows an OAL length of 2.6 inches
Found a green Super Varmint stock for cheap
1.5 pound trigger spring

Shoots Sierra 85hpbt at 2865 fps
Averages 0.5 moa

Epic

 

[Farmcritter]

Not much of a Semi Custom build compared to some of the rifles on show here .
This was and still is a fun budget build .
This is my old T3 that was a .223
When the barrel finally gave up I rebarrelled to a 6x45 ( 6mm223 )

IBI 1-8 twist barrel , 22 inch
Waters Magazine that allows an OAL length of 2.6 inches
Found a green Super Varmint stock for cheap
1.5 pound trigger spring

Shoots Sierra 85hpbt at 2865 fps
Averages 0.5 moa

Great picture! I had a bully many moons ago. He was an awesome dog! Still miss the ole boy.

 

[Harronek]

Great picture! I had a bully many moons ago. He was an awesome dog! Still miss the ole boy.

Yeh…

The Bully’s grow on you after a while .
You spend the first two years pulling your hair out , and by about 3 years they have you trained just the way they want you .


Ken

 

[Hnthrdr]

Tikka stainless, roughteck fluted bolt, 6mm cm x caliber, xlr magnesium, trijicon 2.5-15, sports match rings, stock will likely get replaced to an ultra dyne light weight it’s about 7.5lbs w/o can cant wait to shoot it

 

[tyler_05_33]

Finished up my 6 CM build.

18" PVA .750 taperless,1/7 twist, 5 spiral flutes
UM Bolt knob, rings, and level
Stockys VG
Trijicon credo 2.5-15
OCL Hydrogen K

View attachment 830508
View attachment 830509

Took it to the range today with a box of factory Hornady 103 ELDX. 5 Shots to zero and confirm.

Shots 5-15
View attachment 830510

Shots 15-20
View attachment 830511

what barrel contour did you pick for the stock?

 

[bpitcher]

what barrel contour did you pick for the stock?

I always go with Sendero these days to give me some flexibility in whatever contour I might want to run.

 

[Farmcritter]

18” 6 creed.

 

[DisplacedHusky]

Finished up my 6 CM build.

18" PVA .750 taperless,1/7 twist, 5 spiral flutes
UM Bolt knob, rings, and level
Stockys VG
Trijicon credo 2.5-15
OCL Hydrogen K

View attachment 830508
View attachment 830509

Took it to the range today with a box of factory Hornady 103 ELDX. 5 Shots to zero and confirm.

Shots 5-15
View attachment 830510

Shots 15-20
View attachment 830511

what’s your total weight?

 

[Tanner]

im not sure I have ever owned another rifle that was as “point and shoot” as this 6 Creed. @TheViking you sold a damn good one…

820 yards with the 115 DTACs. 11”x20” IPSC, 10 in a row with the Creed.

The 22-250 is also shooting really damn good with 88s…


Groups at 205 yards. Might keep messing with the 55s but likely not. Fun to see some velocity though.

 

[Tanner]

Dang, I wanted to post a video of the creed but that doesn’t appear to be an option.

 

[SteveAndTheCrigBoys]

Dang, I wanted to post a video of the creed but that doesn’t appear to be an option.

Typically have to upload on YouTube then link it here. Mark it as “unlisted” and the only way to view will be the link (unless you want it to be truly “public”).

 

[Tanner]

Typically have to upload on YouTube then link it here. Mark it as “unlisted” and the only way to view will be the link (unless you want it to be truly “public”).

Got it, thanks! Enroute to YouTube stardom…