Let's see some NRL hunter rifles

[Shortschaf]

Open heavy
Last year sported a mk5 5-25
This year swapped to a 3-18 Tenmile

 

[ID_Matt]

Here’s my open light set up.
Xlr element folding chassis
Lone peak fuzion
24” proof 6.5 creed
SRS brake
MDT ckye lightweight bipod

140 eldms at 2760

Last year I used a titanium action and was able to still make weight with a double pull bipod and 2 side weights. This year I swapped to a steel fuzion action and am going to need to trim 2 or 3 ounces if I want to make light class with the weights (gamer problems?) I may take off the folder or just run no weights but having the weights up front make the balance soo nice.

Used the NF NX8 milxt all year last year. Tried the maven rs1.2 for a 1 day match and didn’t love it. Great for hunting but on some real small targets it’s nice to have .2 mil reference points so I’ll go back to NF.

 

[mj23polaris]

Open heavy
Last year sported a mk5 5-25
This year swapped to a 3-18 TenmileView attachment 696730

What made you switch from the Mark 5 to the trijicon

Sent from my motorola edge 5G UW (2021) using Tapatalk

 

[mj23polaris]

Does anyone plan on going to Laramie in a few weeks? me and a buddy are, maybe try to get a rokslide squad?

Sent from my motorola edge 5G UW (2021) using Tapatalk

 

[Shortschaf]

What made you switch from the Mark 5 to the trijicon

I had been looking to get a smaller/lighter scope for a while. And was pretty set on getting the mk5 3-18.

Then I found the drop evals here and saw that mk5's maybe weren't as top shelf as I thought they were.

Then the Temiles went on sale last fall like crazy. So I bought one.

Having compared this Tenmile directly to a mk5 3-18 I have no regrets (but do wish reticle was less awful)

 

[JohnJohnson]

Lone peak fuzion

How have you been liking this action? I have a barreled action ready in 2-3 months based on a LP Fuzion and I'm hoping I made the right call.

 

[ID_Matt]

How have you been liking this action? I have a barreled action ready in 2-3 months based on a LP Fuzion and I'm hoping I made the right call.

I have had multiple fuzions on competition rifles and hunting. They are my personal favorite. You won’t be disappointed.

 

[loadsandlattes]

This will be my first year shooting NRL. I built a 6.5PRC and will be sending factory 147ELDM. I will not be competing, just using it as practice this year. Because of that, I plan on using the same rifle, ammo, optics, and tripod that I actually hunt with. Should be fun!

 

[eroksolfe]

I shot the 2024 Snake River NRL hunter with my Seekins Hit 6.5 CM which is also my PRS gun. Had an absolute blast. I was just in skills stage for my first Hunter but definitely interested in doing more. I'd like to compete in the open light which the HIT can't do and so was thinking about building a 6.5cm on a chassis that I could then add weight to in order to be my PRS gun as well.

My priority would be as an NRL hunter gun but having dual purpose would be nice. Anyone have experience running one gun both?

The element 4 or the HNT26 look like good options, but I don't know how much weight I could add to em.

 

[JohnJohnson]

My priority would be as an NRL hunter gun but having dual purpose would be nice. Anyone have experience running one gun both?

Open light is a 12# weight limit isn't it? Most PRS guns are 19# or more. That seems like a big weight difference to account for with only the chassis.

 

[eroksolfe]

@JohnJohnson - yeah, that's my concern. I know a barrel swap out plus some weights could get me close to that. But just adding weight to the chassis might leave me pretty short. I've shot a couple PRS with my HIT at about 15 lbs, so even if I got back to there, that would be great.

 

[ID_Matt]

I shot the 2024 Snake River NRL hunter with my Seekins Hit 6.5 CM which is also my PRS gun. Had an absolute blast. I was just in skills stage for my first Hunter but definitely interested in doing more. I'd like to compete in the open light which the HIT can't do and so was thinking about building a 6.5cm on a chassis that I could then add weight to in order to be my PRS gun as well.

My priority would be as an NRL hunter gun but having dual purpose would be nice. Anyone have experience running one gun both?

The element 4 or the HNT26 look like good options, but I don't know how much weight I could add to em.

Element would be your best bet I think. @XLR could probably chime in with his thoughts but you can add a substantial amount of weight to them between the m-lok on the side and internal weights. The butt stock would be the tough choice. The carbon would make it easy to make light class with, but can't add weight to. The c-6 can take a ton of weight but may be too much weight for light class and make your gun butt heavy.

 

[Trogon]

This will be my first year shooting NRL. I built a 6.5PRC and will be sending factory 147ELDM. I will not be competing, just using it as practice this year. Because of that, I plan on using the same rifle, ammo, optics, and tripod that I actually hunt with. Should be fun!

Whats the weight on that without the can?

 

[XLR]

The element 4 or the HNT26 look like good options, but I don't know how much weight I could add to em.

On just the chassis block you can add 3 lbs to a Remington 700 SA Element. That doesn't include adding weights to the buttstock or changing the buttstock to one of our heavier options. Most guys who shoot open light run the Element 4.0 Magnesium with the Carbon grip and carbon buttstock. This chassis weighs 28-33 oz depending on whether or not you run the folder. That same chassis can weigh 7 lbs with the TR-2 buttstock, mercury recoil reducer, TR-2 Main weights, internal forend weights, and 2 sets of M Lok side weights. I would recommend looking at our weight calculator to see the different weight options you can achieve.

Chassis Weight Calculator

Use the form below to calculate and configure your target or hunting chassis weight.

xlrindustries.com

 

[loadsandlattes]

Whats the weight on that without the can?

I want to say right at 8.3 lbs, give or take an ounce or two? I haven't weighed it without can and i'm not sure what the can weighs off the top of my head!

 

[LRshooter6.5]

I ran open light this year with an Impact action, XLR magnesium 4.0, 24.25” #4 contour barrel, Burris XTR Pro, and a double pull light ckye pod and was at 11.81lbs running 140 eldms at 2810. Also shot a teams match and just swapped out the barrel to a MTU and was under 16lbs.

This is pretty much exactly what I’m looking for as a set up. I have a Curtis Valor currently in a W3 with a heavy Palma barrel and a MK5. I’ve been thinking about selling the W3 for a XLR magnesium and getting a different barrel spun up. I’d like the idea of one chassis then loading up weight on it for PRS matches and this chassis seems to fit the bill. Excuse my ignorance but the #4 barrel is a varmint contour? What brand is it? The goal would be a sub 12lb NRL hunter / elk rifle and a 18+ lb PRS rig.

 

[colt1776]

This is pretty much exactly what I’m looking for as a set up. I have a Curtis Valor currently in a W3 with a heavy Palma barrel and a MK5. I’ve been thinking about selling the W3 for a XLR magnesium and getting a different barrel spun up. I’d like the idea of one chassis then loading up weight on it for PRS matches and this chassis seems to fit the bill. Excuse my ignorance but the #4 barrel is a varmint contour? What brand is it? The goal would be a sub 12lb NRL hunter / elk rifle and a 18+ lb PRS rig.

The chassis works great for hunting and NRL to make light weight has just a little flex when you really flex it is the only thing I've found about them. I have 3 magnesium and an aluminum one now so I like them! Yeah you can definitely add weights to the outside and the inside. I add them to the inside to keep it stream lined.

A #4 sporter contour – 1.200″ – 3″ straight shank, tapering to .685″ at 26″