Is This A Carbon Ring?

JRock95

FNG
Classified Approved
Joined
Dec 20, 2025
Messages
5
Borescoped a rifle of mine to check on any carbon buildup. It almost seems that the area where the carbon ring would form looks different depending on if I insert the borescope from the muzzle end vs the breech end. I've attached some pictures. Is this a carbon ring, or just a shadow?
 

Attachments

  • Muzzle End with Case.jpg
    Muzzle End with Case.jpg
    71 KB · Views: 67
  • Breech End.jpg
    Breech End.jpg
    69 KB · Views: 67
  • Muzzle End No Case.jpg
    Muzzle End No Case.jpg
    73 KB · Views: 67
That just looks like a dark shadow spot where the neck portion of the reamer stops.


In the picture where you have an empty case in there, a carbon ring would basically be touching the mouth of the case if it were there.
 
That just looks like a dark shadow spot where the neck portion of the reamer stops.


In the picture where you have an empty case in there, a carbon ring would basically be touching the mouth of the case if it were there.
Why would it be touching the case? I've seen it build up like what looks like shown in the picture, that looks like carbon to me?
 
Back
Top