Grizzly ammo recommendations

[Patriot2]

I have been shooting 200 grain hard cast and 180 FMJ from a new Springfield XDM Elite 10mm and they are cycling fine.

 

[bz_711]

I literally went with the Grizzly Big Bore Ammunition cartridge company. Flat nosed hard cast bullet with a Grizzly paw print on the top of bullet nose

 

[cgkevin324]

Hard cast has always cycled well out of my Glock 10mm full size.
I did notice that it shoots high as close yardages 4-5 inches high.

 

[RonD]

To me, it seems Underwood shoots better than Buffalo Bore but that's just my experience.

 

[Beendare]

Been a while since I read it but supposedly the early gen S&W 10 mm had issues with loose fitting mag's causing jams and the mag's falling out.

I've heard the same but have no personal experience with them.

You could try the copper jacketed ammo. I had some FTF's with 9mm in a SW Shield and going to the copper jacketed stuff solved it.

FWIW, My Stock G20 has been 100% with 700rds of that Underwood and Double Tap 200g hard cast ammo and that was before the cherry coating lube.

It's only when you go to the after market barrels with tighter chambers that you start to see problems with the Glocks. Stock, they just plain work.

 

[rickyw]

I’m using swift a frames in my 10mm

 

[Andrewlonghi]

I've heard the same but have no personal experience with them.

You could try the copper jacketed ammo. I had some FTF's with 9mm in a SW Shield and going to the copper jacketed stuff solved it.

FWIW, My Stock G20 has been 100% with 700rds of that Underwood and Double Tap 200g hard cast ammo and that was before the cherry coating lube.

It's only when you go to the after market barrels with tighter chambers that you start to see problems with the Glocks. Stock, they just plain work.

We ended up getting heavy recoil springs and magazine springs. Changed everything and have shot two mag each no jams no mag drops or anything.

 

[MeetchMcKeef]

10mm 140gr Underwood xtreme penetrator for me.

 

[Scorpion]

I run solid copper bullets in my 10mm. The hardcast lead shot well but I didn’t care for the puff of atomized lead smoke from the uncoated bullets.

We’ve had a lot of bear encounters at night and I didn’t want to risk not being able to shine a light through it.