Ford Raptor Owners/Tire Chains

Ten Bears

WKR
Joined
Mar 1, 2017
Messages
1,611
Location
Michigan
Any Gen 2 or 3 Raptor owners use and could recommend a pair of tire chains ? Or do you not use them with the truck as the manual says not to ?

Can’t seem to find a straight forward answer on this.
 

cb2176

FNG
Joined
Jul 6, 2024
Messages
62
Seems like absolutely nothing is made to be long-lasting and heavy-duty anymore.

An insane amount of stuff are grandparents had is still serviceable.

Anything made in the last ~20 years...
The first sign of trouble, throw it away and buy another. So frustrating.

Some of us would like a HD truck to be used off pavement. Hard to beat the effectiveness of chains.
 

Justin Crossley

Administrator
Staff member
Joined
Feb 25, 2012
Messages
7,556
Location
Buckley, WA
have any recommendations on a pair ?
I carry Les Schwab quick-fit chains most of the time. I also have a set of the v-bar highway service chains but they aren't as easy to throw on so I rarely carry them.

The reason most newer trucks can't utilize chains in the front is the lack of clearance between the top, inside of the tire and the upper control arm. I don't know why that gap is so small on most new trucks but it is and I can't even pass my fingers through on most. The option to fix it is more offset wheels, or wheel spacers.

With all that said, I rarely actually use chains anyway. I simply air down the tires and go.
 

Tjdeerslayer37

Lil-Rokslider
Joined
Jul 10, 2020
Messages
203
Location
Wayne, MI
I get so mad with these new trucks and the ABS system when I am going good
And the computer shuts down any forward progress
Usually pull the ABS fuse when it gets serious
something i have done before is replaced the abs fuse with a reset-able circuit breaker of the same size, then i can flip it on and off like a switch from inside the cab.
 

Matt5266

WKR
Joined
Sep 19, 2021
Messages
672
Location
SW Idaho
There are few if any stock, modern trucks with the clearance for front chains.
I was not aware, I have a 2003 dodge 2500 cummins. It's funny to me that the price of vehicles keeps going up but the value you get keeps going down. "They don't make em like they used too"
 

fmyth

WKR
Joined
Mar 14, 2019
Messages
1,732
Location
Arizona
Seems like absolutely nothing is made to be long-lasting and heavy-duty anymore.

An insane amount of stuff are grandparents had is still serviceable.

Anything made in the last ~20 years...
The first sign of trouble, throw it away and buy another. So frustrating.

Some of us would like a HD truck to be used off pavement. Hard to beat the effectiveness of chains.
Raptors were never intended to be an "HD truck". They are designed and built for high speed off road driving. If you want to take a vehicle built for going fast through the desert and use it to go slow in snow and ice you shouldn't be surprised that there are limitations.
 
Joined
Apr 3, 2013
Messages
3,534
Location
Somewhere between here and there
I was not aware, I have a 2003 dodge 2500 cummins. It's funny to me that the price of vehicles keeps going up but the value you get keeps going down. "They don't make em like they used too"
The Dodge has a solid front axle. Thats your difference. Any truck with IFS will have the upper control arm clearance issues.

@Justin Crossley hit it. Spacers or different wheel offset. Or very low profile chains/cables for the front and v-bars for the rear.

Or drop your PSI to about 18.
 

fmyth

WKR
Joined
Mar 14, 2019
Messages
1,732
Location
Arizona
I carry Les Schwab quick-fit chains most of the time. I also have a set of the v-bar highway service chains but they aren't as easy to throw on so I rarely carry them.

The reason most newer trucks can't utilize chains in the front is the lack of clearance between the top, inside of the tire and the upper control arm. I don't know why that gap is so small on most new trucks but it is and I can't even pass my fingers through on most. The option to fix it is more offset wheels, or wheel spacers.

With all that said, I rarely actually use chains anyway. I simply air down the tires and go.
The further you push out the front control arms the more up/down suspension travel you gain. The biggest downfall to independent front suspension is the limited suspension travel. The only other way to gain travel is to make the truck wider hub to hub but that comes with its own set of issues. I put 1" hub centric spacers on my IFS truck before my hunt season begins and take them off after.

The other issue many trucks have is that manufactures are using the largest brakes discs that will fit within the wheel. This pushes the brake caliper closer to the wheel rim. This creates a potentially dangerous scenario running chains. If you get a loose chain that rips off a front or rear brake line you will lose all of your brakes. I like to have at least 1 inch of clearance between the chains and any part of the truck.
 
Joined
Oct 19, 2017
Messages
1,059
But to be honest. I know a few guys driving truck that love them. Say they are pretty easy to trash though. Run a bit on dry pavement an such doesnt do them any favors. Might make sense on your town rig or something your are running the hiway with.

I wouldnt buy anything but real chains though
 
Top