Echelon CF Versa Ultralight Riflestock Review, By Torin Miller

WKR

WKR
Joined
Jun 14, 2019
Messages
2,042
What route did you end up going? I am torn between these two as well.
Got the barreled action back today, going to call Josh at McMillan tomorrow and order up that mountain tracker long range. I just can't get away from how good the fit and finish is on my last McMillan so I'm going to keep giving them my business. Gun shoots sub 3/4 moa ten shot groups and it isn't even bedded.
 
  • Like
Reactions: NSI

TxLite

WKR
Joined
Sep 6, 2018
Messages
2,038
Location
Texas
Got the barreled action back today, going to call Josh at McMillan tomorrow and order up that mountain tracker long range. I just can't get away from how good the fit and finish is on my last McMillan so I'm going to keep giving them my business. Gun shoots sub 3/4 moa ten shot groups and it isn't even bedded.
I actually tried to order one earlier today and their color/pattern page was down so I wasn’t able to complete it
 

JCMCUBIC

WKR
Joined
Nov 22, 2020
Messages
484
I've been using the Versa heavily this season (since mid-Oct, will continue to early Feb) and the one I'm using has NO flex. It is rock solid.

I've become very fond of this stock. I've been going back/forth on waiting for a Rokstok Lite or just ordering another of these for a light setup.

For anyone planning on ordering one, I'd recommend no paint. The paint on the one I'm using has worn more than any stock I've used. It's my assumption that this is production paint, but I didn't order it so I could be wrong. It's not a big deal to me regarding the looks, just a notice to anyone that it might be important to.
 

NSI

WKR
Shoot2HuntU
Joined
May 19, 2021
Messages
949
Location
Western Wyoming
I've been using the Versa heavily this season (since mid-Oct, will continue to early Feb) and the one I'm using has NO flex. It is rock solid.

I've become very fond of this stock. I've been going back/forth on waiting for a Rokstok Lite or just ordering another of these for a light setup.

For anyone planning on ordering one, I'd recommend no paint. The paint on the one I'm using has worn more than any stock I've used. It's my assumption that this is production paint, but I didn't order it so I could be wrong. It's not a big deal to me regarding the looks, just a notice to anyone that it might be important to.
My only remaining misgiving is the amount of slope on the bag riding portion. Do you notice the reticle rising precipitously on recoil? That has been my issue with my Grayboe Phoenix 2.

Also would you order with ARCA or leave it?

-J
 

JCMCUBIC

WKR
Joined
Nov 22, 2020
Messages
484
My only remaining misgiving is the amount of slope on the bag riding portion. Do you notice the reticle rising precipitously on recoil? That has been my issue with my Grayboe Phoenix 2.

Also would you order with ARCA or leave it?

-J

I do notice it a "touch" more than with the RS when shooting from the bench and/or prone with level supports...but it's minor and I have to focus to notice it. The zero drop design directs forces back and the rise is very little. In the field I've been very impressed with it. I was able to watch impact on 3 animals so far at fairly short range with a 6x scope. One was the lead coyote of a pair trotting straight towards me. Watched the first drop and was immediately on the second but the cover stopped me from shooting. The flat toe/forend of the RS will be most helpful when an extremely solid position is built...I'm fair at building position quickly but in the field I think it will be rare that I can build a position so well that the toe/forend will make as much difference as it does when at the range.

To me, in the field, I think the zero drop of both the Versa and RS will make the biggest difference. ...but it's a rare thing for me to have the oppurtunity to shoot prone. That might change things for others.

I should note, the angles on the forend/toe do give the ability to adjust elevation.

I will likely add the ARCA as long as it is easily removable. I don't require it, but I like having the option.

If the RS Lite comes in at the same weight, and was available now, I'd have already ordered one. They are both well designed stocks with the RS have a couple of things I prefer, but the weight of the Versa is it's biggest draw for me.
 

Redleg84

FNG
Joined
Apr 3, 2019
Messages
34
Location
Maine
I do notice it a "touch" more than with the RS when shooting from the bench and/or prone with level supports...but it's minor and I have to focus to notice it. The zero drop design directs forces back and the rise is very little. In the field I've been very impressed with it. I was able to watch impact on 3 animals so far at fairly short range with a 6x scope. One was the lead coyote of a pair trotting straight towards me. Watched the first drop and was immediately on the second but the cover stopped me from shooting. The flat toe/forend of the RS will be most helpful when an extremely solid position is built...I'm fair at building position quickly but in the field I think it will be rare that I can build a position so well that the toe/forend will make as much difference as it does when at the range.

To me, in the field, I think the zero drop of both the Versa and RS will make the biggest difference. ...but it's a rare thing for me to have the oppurtunity to shoot prone. That might change things for others.

I should note, the angles on the forend/toe do give the ability to adjust elevation.

I will likely add the ARCA as long as it is easily removable. I don't require it, but I like having the option.

If the RS Lite comes in at the same weight, and was available now, I'd have already ordered one. They are both well designed stocks with the RS have a couple of things I prefer, but the weight of the Versa is it's biggest draw for me.
The full length arca I had added when I ordered is easily connected/removed with 3 screws.

I'm probably in the minority here, but I actually like a little slope to the bag riding portion of the stock for elevation adjustment. I understand the reason why people prefer the flat bottom though.

My only initial gripe with the stock is the finish isn't as clean and perfect as stocks from other makers I've had. Nothing more than cosmetic though
 

6.5x284

WKR
Joined
May 7, 2015
Messages
1,079
Location
NW MT
Used mine hard all through sheep, deer, and elk seasons. Packed and overnighted a lot. Love it. Have a second in the queue for my 6.5 SAUM. I sold my Rokstok some time ago and for me greatly prefer the grip area on the Versa. I’ll order up a third in a short compact size for my kid to when he’s ready to start hunting.


Sent from my iPhone using Tapatalk
 

AZ_Hunter

WKR
Classified Approved
Joined
May 1, 2024
Messages
427
Used mine hard all through sheep, deer, and elk seasons. Packed and overnighted a lot. Love it. Have a second in the queue for my 6.5 SAUM. I sold my Rokstok some time ago and for me greatly prefer the grip area on the Versa. I’ll order up a third in a short compact size for my kid to when he’s ready to start hunting.


Sent from my iPhone using Tapatalk
That’s good to hear. I just got my blacktooth and am not sure it’s an improvement over the Stockys… I think you just convinced me to spend more money and get the echelon
 

6.5x284

WKR
Joined
May 7, 2015
Messages
1,079
Location
NW MT
That’s good to hear. I just got my blacktooth and am not sure it’s an improvement over the Stockys… I think you just convinced me to spend more money and get the echelon

I’d pay the extra 70 for texture. It’s not super pretty compared to the big guys with laser cut molds, but functionally is one of my favorite aspects. Perfect balance of grip without being too aggressive.


Sent from my iPhone using Tapatalk
 
Joined
Sep 10, 2014
Messages
2,872
Location
hawai'i
this actually looks like a stock that's worth the money in that 1000 tier with its weight and ergos. Im sure I'm in the minority but I only wish there was some spacer options as getting the negative comb dialed in has been a little iffy with the rokstock. @6.5x284 did you shoot same LOP for both stocks? I found i had to go a little longer lop than usual with rokstock over a traditional stock, but I would think echelon/rokstock would be close
 

SDHNTR

WKR
Joined
Aug 30, 2012
Messages
7,225
Can you remove the bolt, and get a cleaning rod down the bore without removing the stock from the BA?
 

6.5x284

WKR
Joined
May 7, 2015
Messages
1,079
Location
NW MT
this actually looks like a stock that's worth the money in that 1000 tier with its weight and ergos. Im sure I'm in the minority but I only wish there was some spacer options as getting the negative comb dialed in has been a little iffy with the rokstock. @6.5x284 did you shoot same LOP for both stocks? I found i had to go a little longer lop than usual with rokstock over a traditional stock, but I would think echelon/rokstock would be close

I had 13.5 for both the RokStok and this one. For me both seemed good LOP wise.


Sent from my iPhone using Tapatalk
 
Top