DIY paper tuner?

[Jacob Chapman]

Looking to build a paper tuner, wondering if anybody has details/specs for what they did?

Found a few online, but $75 for a paper tuner is ridiculous lol

 

[Marshfly]

I have made them out of 1x2s to make a frame the size of a sheet of paper and then screwed an arca plate to the bottom to mount to a tripod.

The one I have now is made from PVC and I use painter's masking paper rolls to shoot through. If you search pvc paper tuner there are how too all over the internet.

 

[Bump79]

Simplest thing I did was cut out a carboard box. Clips around it and hang it from the ceiling.

About anything will do

 

[BCSojourner]

Use some pvc and connectors. SImple, inexpensive and you don't have to glue it together (i.e., takedown for easy storage).

 

[Nicaburns]

The cardboard box is the cheapest… I’m lazy and use a clip top easel for flip charts. Easy to clip sheets on and rotate as needed

Amazon.com

 

[Billy Goat]

Buy a roll of paper.
Like this:

Newsprint Roll - 24

GRADE "A" A clean low-cost alternative for void fill , wrapping lightweight items or using as interleaving. 9" diameter newsprint roll. Use with 24" Paper Cutter .ULINE offers over 42,000 boxes, plastic poly bags, mailing tubes, warehouse supplies and bubble wrap for your storage, packaging, or...

www.uline.com

Get a broom handle, or larger dowel and cut it in one piece about 1/3 of the other.

Use the longer section of broom handle to put through the roll of paper and suspend from the ceiling, then you pull down on it, fasten clips to the shorter section of handle, clip to the bottom of the paper. Holds it out straight, and weights it.

When not using it, roll it back up. As you shoot up sections, tear/cut them off.


Or just shoot bareshafts and forget about paper tuning.

 

[3forks]

I use a $18.00 garment rack, a roll of paper, and a few clamps.

It works fine.

 

[wapitibob]

shoot into a non directional bale like we did before paper tuning existed, $0
just eyeball it, and bare shaft, $0

 

[Jkuhn22]

Gohunt has a video out on how to make one out of 1” PVC pipe. Very easy to make and can be disassembled.

Other option is to take a left over political sign, cut out the middle and use paper clamps to hold paper to the frame. Hang it in front of the target.

 

[BrushmtnRed]

A step ladder and some Christmas wrapping paper is an old trick

 

[Idaboy]

shoot into a non directional bale like we did before paper tuning existed, $0
just eyeball it, and bare shaft, $0

^^^ this
Bareshaft..... I gave away my paper tuner after changing to bareshaft

 

[BenHankins]

Gohunt has a video out on how to make one out of 1” PVC pipe. Very easy to make and can be disassembled.

Other option is to take a left over political sign, cut out the middle and use paper clamps to hold paper to the frame. Hang it in front of the target.

Watch the one off of the GoHunt YouTube page. They go over exactly everything you need.


Sent from my iPhone using Tapatalk

 

[Samdemarais]

I use a clip board. Just use a jig saw to cut out a hole that is about 1” smaller the a standard 8.5”x11 piece of paper. Then screw the clip board to a 1x4x6.

 

[Mike 338]

PVC pipe, elbows, clamps.

 

[sasquatch]

Buy a roll of paper.
Like this:

Newsprint Roll - 24

GRADE "A" A clean low-cost alternative for void fill , wrapping lightweight items or using as interleaving. 9" diameter newsprint roll. Use with 24" Paper Cutter .ULINE offers over 42,000 boxes, plastic poly bags, mailing tubes, warehouse supplies and bubble wrap for your storage, packaging, or...

www.uline.com

Get a broom handle, or larger dowel and cut it in one piece about 1/3 of the other.

Use the longer section of broom handle to put through the roll of paper and suspend from the ceiling, then you pull down on it, fasten clips to the shorter section of handle, clip to the bottom of the paper. Holds it out straight, and weights it.

When not using it, roll it back up. As you shoot up sections, tear/cut them off.


Or just shoot bareshafts and forget about paper tuning.

THIS


Sent from my iPhone using Tapatalk Pro

 

[Eastonsgrandpa]

I bought a roll of paper on Amazon and then hung it in the basement on an old shower curtain rod. Put that up on some big J-hooks in the bare rafter beams. At the bottom I just put a series of clips to weight it down. Probably a better way to do it but it worked and I never really went any further with it.

 

[Marble]

I just hang a sheet of 8x11 paper from a ladder and put a target behind it. Don't have to build or store anything...

Sent from my SM-S918U using Tapatalk

 

[TheArdentOutdoorsman]

Nothing to them. Anyway you can hold paper taught, then shoot through it.

 

[Grassymike]

OK. Buy a roll of wax paper at the grocery store. Take it out of the box, step on it to flatten it. Hang in basement in front of a target bag . I used a clothes hanger that I untwisted and bent to a U shape with a flat bottom. Flattening the roll keeps the paper from unrolling when you shoot thru it. I clip a broken arrow shaft to the bottom with two spring clamps for woodworking. Shoot through it and enjoy easy to see paper tears.