Dead Air Nomad Ti XC

KGM is the issue with Dead Air’s welded cans and since they aren’t involved it should be fine.

For the record I had three sequential Nomad Ti’s sent back, one exploded, a second was cracked and the third didn’t have any issues but had been shot less and was the middle serial number meaning that it most likely had the same issue. KGM took 5 months to fix it and after they shipped it back I found out all of them were full of sand blast media when it completely coated the inside of my barrel and action after the first range trip.

I had to completely tear my rifle apart including removing the barrel, the action from the chassis and disassembling the bolt completely to get all of it out then spent several hours cleaning the suppressors multiple times only to continually find media occasionally in my action for months afterwards. I am thankful that I didn’t put it on my AR or M1A as that would have been a total nightmare to remove.
That's infuriating. So is KGM still fixing the welded cans or has DA worked something out with someone else?
 
Back
Top