Complete Tikka magazines - Orange, flush, extended COAL, etc. (Now a product)

[pods8 (Rugged Stitching)]

Wanted to update: I took sandpaper to the back of both of the followers until they were smooth. I was able to get oput Saturday and shoot. I had no problems with shooting >40rds through each. Problem Solved.
Thanks @pods8 (Rugged Stitching)

Great, like I said if you have further issues reach out and I'll swap'm out.

 

[nm.otter]

If an option comes along that works slick with dasher I might have to chamber up a dasher hunting barrel..

Not sure how similarly they might feed, but I'd like to see 6mm (or .22) GT tested.

 

[pods8 (Rugged Stitching)]

Not sure how similarly they might feed, but I'd like to see 6mm (or .22) GT tested.

I believe folks have said GT cases feed fine from the M length mags so not really a gap there. If folks want a M (or slightly shorter) variant printed out its certainly something I could do but absent the request I wasn't going to spend time on it. For 243, 6creed, etc. I just use the M+ mags and don't see a point in M mags for those since they work in M+ and that allows flexibility for longer cartridge lengths in them too.

The ARC / BR / Dasher is a tricky finicky one because the case body is so short, there are iterations going on in the background on that.

 

[nm.otter]

I believe folks have said GT cases feed fine from the M length mags so not really a gap there.

This made me curious.

 

[pods8 (Rugged Stitching)]

This made me curious.

Gotcha, guess it depends on the demand and input from users on what issues they're having.

 

[Formidilosus]

Pods sent some mags to be used at the winter S2H course last week.

All the mags worked without issue in the snow and ice for several hundreds rounds each. Sand and debris is the next question. Then longevity.
However, right now his 223 3 and 4 round mags are what is in my hunting rifles; and his M+ mags are what is being used in the 6XC Raven.