Case Trimmer Suggestions

Joined
Dec 30, 2014
Messages
9,727
This is what I'm looking at: https://www.blackwidowshooters.com/product-page/trim-it-ii-with-2-free-dies

Trim/Chamfer/Deburr and you can buy $20 dies for different cartridges instead of having to buy a whole $105 trimmer like the Giraud.

For 3 cartridges - .223, 6.5cm, and .30-06 - I'm looking at $170 with the trim-it II instead of $315 for the Giraud.

Here's a review for 3 of the trimmers being discussed: https://calgunandprep.com/home/blog...case-trimmers-ez-trimit-2-vs-wft-2-vs-giraud/

Just for clarification for others, when I said Giraud, I was talking about the bench mounted one. https://www.giraudtool.com/giraud-power-trimmer.html

I've had the WFT from little crow, I'd be happy to part with it in .223 if anyone is interested.
 

Brendan

WKR
Joined
Aug 27, 2013
Messages
3,875
Location
Massachusetts
I reached out to Henderson. Unless something changes, they can handle up to .338, but not larger. From what they told me: "Anything bigger is too large for the cutter design."

Leaning towards a Giraud bench mounted similar to @wind gypsy, or something like the Henderson and just do any larger calibers manually...
 

caesAR15

Lil-Rokslider
Joined
Jan 31, 2017
Messages
138
Location
IA
Yet another Little Crow user checking in. Very satisfied with my purchases from them.
 

Brent111368

Lil-Rokslider
Joined
Feb 11, 2019
Messages
152
Location
Colorado Springs, CO
Wilson was the best I have ever used, a thing of trimming beauty. I sold it for some dumb reason. Currently use a RCBS and it works great. Used a Lyman for a lot of years and no complaints. They all seem to work really well.
 

B23

WKR
Joined
Aug 17, 2017
Messages
1,154
Location
NW
My wife’s uncle turned me on to Little Crow - I’m a customer for life, especially if you tackle more than a few loads!

I'm a Little Crow user as well except I have their WFT2 with the interchangeable inserts so I use the same trimmer for everything I have and just pop out the little insert the case shoulders on. I have a few cartridges they don't make inserts for but they'll sell you blanks and my smith made them for me with the same chamber reamer he used to chamber my gun.

I imagine other similar trimmers do a good job as well but the Little Crow WFT/WFT2 always leaves a nice squared off cut, every case neck comes out the same length, and I can zip through 100 cases in just a few minutes.
 

Cutknife

FNG
Joined
Aug 16, 2020
Messages
18
I purchased the Lyman Xpress case trimmer a few months ago, works fine for 223 bulk stuff. Way better than doing it the old way.
 
Top