ChrisA
WKR
My Prodigy limbs were replaced and the strings have about 75 shots. My axle to axle is 32 1/4 on the self side and 32 5/16 on the right side, right handed bow. The spec ATA is 32", and a quarter inch seems out of tolerance. I can't find any info but I believe its generally acceptable to be within 1/8".
The bottom cam has the cable barely inside of the rear timing dot on the cam. The top cam has cable almost outside the timing mark.
Is this acceptable or do I shorten 1/4" to the 32" spec?
I have a drawboard and can press the bow.
The bottom cam has the cable barely inside of the rear timing dot on the cam. The top cam has cable almost outside the timing mark.
Is this acceptable or do I shorten 1/4" to the 32" spec?
I have a drawboard and can press the bow.
