Blaser rifles

LightFoot

WKR
Joined
Feb 21, 2016
Messages
1,449
Location
Texas & Alaska
Yup!

Blaser R8 Professional Success 30-06 (purchased in Germany)

It has never let me down and shoot sub-1/2MOA with Hornady Precision Hunter 178 ELD-X.

My biggest gun regret is selling my 375H&H Blaser (also bought in Germany).
86ea96b2893396f1c2d900c183b4ad5e.jpg


>>>----JAKE----->
 
OP
HuntInWild88
Joined
Aug 16, 2018
Messages
1,149
Location
Alaska
Yup!

Blaser R8 Professional Success 30-06 (purchased in Germany)

It has never let me down and shoot sub-1/2MOA with Hornady Precision Hunter 178 ELD-X.

My biggest gun regret is selling my 375H&H Blaser (also bought in Germany).
86ea96b2893396f1c2d900c183b4ad5e.jpg


>>>----JAKE----->
Great buck!!
I too also purchased both my in Germany!
Can wait to get back over there to hunt again!
 

Monty3006

FNG
Joined
Mar 28, 2016
Messages
53
I have an R8 Professional with .233, 30-06, and .375h&h barrels. I use it for almost everything I hunt. My only complaint is the weight, and even then it’s very manageable. Plus it gives me an excuse to have a couple of lighter rifles.
 
OP
HuntInWild88
Joined
Aug 16, 2018
Messages
1,149
Location
Alaska
I had a .243 berral for mine but regrettably sold it.
They are just such versatile accurate rifles
 

SoDaky

WKR
Joined
Apr 6, 2018
Messages
670
Location
sd
Had an early version with 3 barrels.(300 Win Mag,257 Weatherby and 22-250)Light,extremely accurate,switch and shoot,everything needed in one rifle.So of course I finally sold the package at a nice profit.Dumb ass move.Very dumb.
 

rodney482

WKR
Joined
Feb 27, 2012
Messages
3,935
Just about bought an R8 but the $700 scope mount kept me from pulling the trigger
 

Jim Flint

FNG
Joined
Jun 19, 2019
Messages
17
Location
AK
Seeing your gloves made me chuckle; I use the same.;)
My only complaint is the weight, and even then it’s very manageable.
Agreed, the weight of the R8 should be reduced... for less than a price tag of $8000+ for their R8 Carbon Success.

Nonetheless, my biggest complaint is not the weight or the cost, but rather the slow twist rates. I can barely stabilize the 175 grain LRX out of my 30R.
 

ChromeKype

Lil-Rokslider
Joined
Jul 30, 2017
Messages
112
I’m thinking about picking up a used .308 R8 for suppressed hunting. I can get the barrel cut to 16” and rethread to5/8x24. With the blaser action this should be one short gun for my 9” sig srd7.62ti suppressor. I really want a thumbhole stock though, but am unwilling to pay the $3700 they want for it new. We will see, I’m also looking at the new S20


Sent from my iPhone using Tapatalk
 

LightFoot

WKR
Joined
Feb 21, 2016
Messages
1,449
Location
Texas & Alaska
I’m thinking about picking up a used .308 R8 for suppressed hunting. I can get the barrel cut to 16” and rethread to5/8x24. With the blaser action this should be one short gun for my 9” sig srd7.62ti suppressor. I really want a thumbhole stock though, but am unwilling to pay the $3700 they want for it new. We will see, I’m also looking at the new S20


Sent from my iPhone using Tapatalk
Be sure to work with a gunsmith that knows Blasers. The barrels are very hard compared to what gunsmiths usually see. I looked into having mine done and it was cost prohibitive (for me).

>>>----JAKE----->
 

Jim Flint

FNG
Joined
Jun 19, 2019
Messages
17
Location
AK
I’m thinking about picking up a used .308 R8 for suppressed hunting. I can get the barrel cut to 16” and rethread to5/8x24. With the blaser action this should be one short gun for my 9” sig srd7.62ti suppressor.
Keep in mind that while threading 5/8 on the standard profile barrel is possible, it's not advised. You won't be left with much shoulder for your suppressor. I had to go with 9/16. J Sip & Sons will thread a Blaser, as will Precision Barrel Work.
 

Steve O

WKR
Classified Approved
Joined
Feb 29, 2012
Messages
3,077
Location
Michigan
I do a bit of traveling to hunt and I love my R8s. I have 100% confidence I can take my Blaser completely apart and back together, including the scope and it will shoot exactly where it is supposed to. I am sure of that because I have taken the time a number of times to do just that with every barrel and stock configuration I have...for each shot of a 5 shot group. It is amazing to take the scope off, take the rifle completely apart and put everything back together on every shot and shoot a sub 1” group. I have factory .243, 300 WM, and 375 H&H. I also have a custom 264 Winchester Mag barrel that I use most of the time. I have a wood Jaeger and my workhorse has a custom carbon fiber stock. Next
week I’m planning on picking up the 22 Rimfire barrel.

They are very addicting. I’d like to find an R93 as a project rifle and I’m not quite sure I want to step into the K95 arena!

Great trigger, great accuracy, great handling, and incredible versatility!

Some of my DIY Blaser adventures:


39887EC6-81D1-438F-8853-C2471B251EAA.jpeg


5EF9BD9E-4A82-4519-8571-C64D0864D2D4.jpeg


766959D8-6852-451E-9A76-ADB0E028D620.jpeg


592AD9D2-6620-422F-B84C-BC666AB8A12A.jpeg



19611950-9724-4DFA-98EA-566C1A923C97.jpeg

Jaeger with .375 H&H barrel. Will be the 22 as well.


203098CF-FEBE-401B-B7B8-D05B94BDFF44.jpeg

I’ve got the heavy Pelican case that comes with most R8s in storage maybe for an Africa trip someday and usually toss everything in this Americase and into my duffle for flights.

Love my Blasers.
 
Last edited:

LightFoot

WKR
Joined
Feb 21, 2016
Messages
1,449
Location
Texas & Alaska
I do a bit of traveling to hunt and I love my R8s. I have 100% confidence I can take my Blaser completely apart and back together, including the scope and it will shoot exactly where it is supposed to. I am sure of that because I have taken the time a number of times to do just that with every barrel and stock configuration I have...for each shot of a 5 shot group. It is amazing to take the scope off, take the rifle completely apart and put everything back together on every shot and shoot a sub 1” group. I have factory .243, 300 WM, and 375 H&H. I also have a custom 264 Winchester Mag barrel that I use most of the time. I have a wood Jaeger and my workhorse has a custom carbon fiber stock
week I’m planning on picking up the 22 Rimfire barrel.

They are very addicting. I’d like to find an R93 as a project rifle and I’m not quite sure I want to step into the K95 arena!

Great trigger, great accuracy, great handling, and incredible versatility!

Some of my DIY Blaser adventures:


View attachment 188407


View attachment 188408


View attachment 188409


View attachment 188411



View attachment 188412

Jaeger with .375 H&H barrel. Will be the 22 as well.


View attachment 188413

I’ve got the heavy Pelican case that comes with most R8s in storage maybe for an Africa trip someday and usually toss everything in this Americase and into my duffle for flights.

Love my Blasers.
Who did your custom barrel?

>>>----JAKE----->
 

Steve O

WKR
Classified Approved
Joined
Feb 29, 2012
Messages
3,077
Location
Michigan
Friend of mine here in Michigan did the stock. He does not sell them anymore. The barrel was made by Elmer Laitala. Elmer has retired but trained and and sold his business to another guy:


All good things must come to an end. I am retiring from the Blaser barrel business in the fall of 2019.
I am turning the business over to Mr. David J. Campbell who owns Palehorse Zero, LLC. Dave is a licensed gunsmith and is being trained in using my process plans, tooling, fixtures and machines. He has been cerakoting my barrels for four years.
I feel confident he will continue to supply the same high-quality aftermarket Blaser barrels into the future.
Dave’s contact information is:
Email: [email protected]
Website: www.palehorsezero.com
All inquires and new orders should be directed to Dave.
Thank you, all my customers who have purchased “Elmer’s barrels” over the years.
Regards,
Elmer
 
Top