Best Mono Bullet for Hunting/Effective Kills

Macintosh

WKR
Joined
Feb 17, 2018
Messages
2,875
Approx 50 yards shot on a whitetail buck. Barnes factory-loaded 168gr TTSX 30-06 from an 18” barrel, estimated mv 2700, estimated impact velocity a hair over 2600fps.
Quartering to, shot was at an angle from above. Entrance on upper shoulder through scapula, exit mid rib cage on off-side.

Nothing really shocking. Deer jumped at impact and bolted downhill down the skid trail he was already trotting down, crashed 50 yards later. Excellent, constant blood from impact to where he lay, the kind a color-blind chimp could follow in the dark. This is one of the longer (the longest?) runs Ive had with this combo.

Entrance was .30cal hole. The scapula fractured and caused some more damage than normal to the inside of the on-side shoulder. As seen from inside ribcage, the entrance and exit holes are both 1.5” or so, roughly golf-ball size. The scapula was the only bone it hit. Lungs were jelly. There was some considerable bloodshot fascia, more than normal I’d say, along some of the larger muscles on the on-side.

Entrance hole in front shoulder visible at the tip of the blade
IMG_6267.jpeg

Exit hole—deer is hanging so its elongated, but it was a nice round 1.5” hole.
IMG_6263.jpeg

This is the inside of the entrance hole just inside the scapula. You can see fractured bone and some shredded meat. This is more meat damage than I typically see, although I dont make a habit of shooting thru the shoulder blade.
IMG_6266.jpeg

Inside chest cavity, entrance on left, exit on right. Both holes are about 1.5”. The white chunks are tallow.
IMG_6271.jpeg
 
Last edited:

waspocrew

WKR
Joined
Apr 2, 2022
Messages
869
Location
MT
Killed 4 animals last year with the 267 Hammer HHT from my 338 RUM. This year, my 7 SAUM and 145 LRX had accounted for 4 animals.

Both have performed well enough. Haven’t shot extreme distance on game (longest was 580 yards), but all have been pass throughs and little to no tracking involved.

Most recent was a mule deer buck yesterday at 315 yards. Dropped on the spot with the 145 LRX punching through both shoulders.

Definitely not a mono guy, but I’ve been happy with the performance.
 
Joined
Nov 20, 2021
Messages
1,717
For you, what is extreme range if 580 yds (1/3 of a mile) isn't? Good shooting. If you don't mind me noticing, you've shot 8 animals with monos over the past year. You indicate you are "definitely not a mono guy but happy with the performance". Meaning you typically shoot at longer-range beyond say, 580 yds, where the mono isn't the best choice for expansion reasons? Just wanting to clarify, as my mind might not be picking up on what you're saying.
 

waspocrew

WKR
Joined
Apr 2, 2022
Messages
869
Location
MT
For you, what is extreme range if 580 yds (1/3 of a mile) isn't? Good shooting. If you don't mind me noticing, you've shot 8 animals with monos over the past year. You indicate you are "definitely not a mono guy but happy with the performance". Meaning you typically shoot at longer-range beyond say, 580 yds, where the mono isn't the best choice for expansion reasons? Just wanting to clarify, as my mind might not be picking up on what you're saying.

Everyone's definition of "long range" varies - for me, I think 750 yards and out is getting pretty far, especially on game. Where I typically hunt, we have a lot of wide open areas, including several canyons.

Addressing the mono use - I hand load and like to try different projectiles. The majority of animals I've killed have been with cup and core bullets (accubonds, ELDMs, and VLD hunters). Having heard countless people tout Hammers as the best hunting projectile, I thought they were worth a try. They shot very well out of my 338 RUM, so I went with it last season. This season, I wanted to use my 7 SAUM so I briefly tested it with several projectiles including the 145 LRX. The LRX shot great, so again, I just went with it.

For longer range shots, I'd rather have a berger or hornady for more reliable expansion. While the monos all resulted in dead animals, exits weren't really all that impressive. Usually just caliber size entrance and maybe slightly bigger than caliber exit. Using monos, generally the mantra is "speed kills", so using lighter weights with lower BC is the compromise. If I lived in a state that required me to hunt with monos, I'd be fine using them, but for where I hunt, I don't think they are necessarily my first choice since longer shots are always a possibility.
 

DagOtto

Lil-Rokslider
Joined
Jun 19, 2024
Messages
107
Congrats to your boy! I recall both my son's first animals (pronghorns). In different years with a 110 TTSX from a .270 Win and 130 TTSX from an 30-06. Same loads a year or two later and both were one and done on elk.
Thanks much. He was thrilled and proud. Shooting drills over the last year made such a difference as he set up and took the shot with real calm confidence! Pretty cool moment for me as a dad.
 

DagOtto

Lil-Rokslider
Joined
Jun 19, 2024
Messages
107
Approx 50 yards shot on a whitetail buck. Barnes factory-loaded 168gr TTSX 30-06 from an 18” barrel, estimated mv 2700, estimated impact velocity a hair over 2600fps.
Quartering to, shot was at an angle from above. Entrance on upper shoulder through scapula, exit mid rib cage on off-side.

Nothing really shocking. Deer jumped at impact and bolted downhill down the skid trail he was already trotting down, crashed 50 yards later. Excellent, constant blood from impact to where he lay, the kind a color-blind chimp could follow in the dark. This is one of the longer (the longest?) runs Ive had with this combo.

Entrance was .30cal hole. The scapula fractured and caused some more damage than normal to the inside of the on-side shoulder. As seen from inside ribcage, the entrance and exit holes are both 1.5” or so, roughly golf-ball size. The scapula was the only bone it hit. Lungs were jelly. There was some considerable bloodshot fascia, more than normal I’d say, along some of the larger muscles on the on-side.

Entrance hole in front shoulder visible at the tip of the blade
View attachment 792388

Exit hole—deer is hanging so its elongated, but it was a nice round 1.5” hole.
View attachment 792391

This is the inside of the entrance hole just inside the scapula. You can see fractured bone and some shredded meat. This is more meat damage than I typically see, although I dont make a habit of shooting thru the shoulder blade.
View attachment 792389

Inside chest cavity, entrance on left, exit on right. Both holes are about 1.5”. The white chunks are tallow.
View attachment 792392
Congrats!

And thanks for the really great necropsy write up and details!
 

BenRubin3

FNG
Joined
Dec 6, 2024
Messages
15
Been happy with my 6.5PRC factory Barnes LRX. Here are entry/exit wounds for my elk this year from 100 yard shot. He buckled then didn’t walk more than 10 yards and was dead within 15 seconds.

Entry:
IMG_4035.jpeg

Exit:
IMG_4038.jpeg
 
Joined
Nov 20, 2021
Messages
1,717
Love the clean meat, no other way to do it. Not much drama for pictures sake. Barnes simply get it done with boring monotony and more meat in the freezer. 🍻
 
Top