Benelli/Franchi “Click”?

[sndmn11]

Calling has been great. And lower prices than listed. I think that's also where I got this POS Franchi from. Was cheaper over the phone as well.

Tax?

 

[Jesse Jaymes]

They didnt charge me. And my FFL is a stickler on showing tax paid. Im gonna have to eat 6% to get it out of jail...

 

[summs]

When I got my stoeger m3500 first thing I was told to do was go skeet shoot with 1 1/4 duck loads and work in some cheap turkey or duck 3.5 magnums to break in the inertia spring.

The 3500 comes with a 'recoil reducer' lug in the stock, it will absorb a good bit and not cycle 2 3/4 7/8oz loads, 1oz seems to be no problem. Take the recoil reducer out and it cycles all flawlessly. It's my duck gun that just wont die. Had it 10 years and want to upgrade to a Benelli but only when this one quits.

 

[thinhorn_AK]

Neve had that issue with my super Vinci. ~ 800 rounds (I know not much for a shotgun) through it, some hunting loads for ducks but probably 600/800 were just cheap skeet/trap ammo for….trap and skeet.

I sort of want to move on from the super Vinci and get an SBE3.

 

[summs]

Neve had that issue with my super Vinci. ~ 800 rounds (I know not much for a shotgun) through it, some hunting loads for ducks but probably 600/800 were just cheap skeet/trap ammo for….trap and skeet.

I sort of want to move on from the super Vinci and get an SBE3.

I always wanted a super vinci, shame they stopped making that model. Why do you want the change?
I'm picking up an M2 after the first of the year.

 

[sndmn11]

They didnt charge me. And my FFL is a stickler on showing tax paid. Im gonna have to eat 6% to get it out of jail...

Did the cynergy arrive?

 

[Laelkhunter]

As others have said (several times), you have to let the bolt slam forward. If you "quietly" let it go forward, you will experience the clicks. It's similar to riding the slide forward on a pistol when loading it. You are supposed to "rack it"- pull it sharply and let it go to chamber the top round in the magazine.
Proof of this is when you shoot the shotgun, have you ever had the "click" on the round that just chambered after firing the first? If not, then you know the loading of the chamber process is where the problem is- Operator error. If it clicks on the second round, then you have to look further and clean the bolt, lube it, etc.

 

[thinhorn_AK]

I always wanted a super vinci, shame they stopped making that model. Why do you want the change?
I'm picking up an M2 after the first of the year.

I just want to switch because the make that sbe3 with that best coating. I live and hunt near the coast so corrosion resistance is important to me.

 

[Jesse Jaymes]

For those that haven't read the string...I allow the bolt to fully ride "home" lifting a shell of the lifter EVERY time. That is NOT the issue. There is not requirement to be quiet when departing the truck on the prairie for birds.

 

[Jesse Jaymes]

@sndmn11

It did. I shot 2 rounds of trap with it yesterday. I am TERRIBLE, hence the purchase of a 2026 club membership.

But I DID CRUSH quite a few clays with it. Only 50 rounds, but I pretty much this gun.

But it was not without issue.

MHB has been answering a few of my questions offline. Stated the Cynergy line of shotguns do not function with Cheddite primers. Fiocchi is assembled with Cheddite?

I bought a flat of 20 and a flat of 12 prior to getting this information. I had issues getting ammo to fire in both my 12 and 20 Cynergy's. More so with the new 20. Issues with Top Gun Federals not going off too.


Seems I cannot find happy....

 

[summs]

I just want to switch because the make that sbe3 with that best coating. I live and hunt near the coast so corrosion resistance is important to me.

Has it been out long enough to see real world corrosion resistance? I hunt the salt marshes of NJ.

The stoeger m3500 I got 10 years would get so badly rusted after each trip, I sand blasted most of it and repainted and covered in epoxy clear.