Arrow Setup for Mulies

[david long]

OK guys, what arrow setup are you using for mulies? Here is mine:

[FONT=&quot]Arrow Length: 28”[/FONT][FONT=&quot]
[/FONT]
[FONT=&quot]Shaft: Carbon Express Maxima 250[/FONT][FONT=&quot]
[/FONT]
[FONT=&quot]Nock: Bohning Double Lock Nock (10.5 gr)[/FONT]

[FONT=&quot]Vanes: Three 2” Bohning Blazers vanes (6 gr ea.) set at 3 degree helical[/FONT][FONT=&quot]
[/FONT]
[FONT=&quot]4” Bohning Blazer wrap (7.5 gr)[/FONT][FONT=&quot]
[/FONT]
[FONT=&quot]100 gr G5 T3 mechanical broadhead[/FONT]

[FONT=&quot]Total Arrow Weight: 360 grains[/FONT][FONT=&quot]
[/FONT]
[FONT=&quot]FOC: 12.3%[/FONT]

 

[evan williams]

I got your weight beat Only time it pays to be short

Right now:

Arrow length: 26 15/16"

Shaft: Easton FLATLINE 400

Nock: Easton Micro (not a big fan of the super on these arrows)

Vanes: Three 2.1" Fusions at 3 degree R helical (thank you Bohning for the HELIX Jig!!)

4" Easton green flame wrap

BROADHEADS: Either G5 T3, Ulmer Edge, or Trophy Ridge Steelhead XL ( I need to play more )

Total Arrow weight: 345 grains

I honestly haven't ran my FOC on that yet should be pushing 13% though. Getting 309 FPS at 28"/69# and 74 KE.

 

[Aron Snyder]

Gold Tip Kinetic 300's @28.5 inch
Fletched with four 2.5" Vane Tech Vanes
125 Grain Point
Getting 289 fps with 489 grain arrow

 

[justin davis]

Carbon tech Rhino @ 27.5 inches
Bohning Double Lock Nock
125 grain head
Fletched with 4 blazer or 4 FF Flash vanes
Total arrow weight of 475

 

[Juan_ID]

Arrow Length: 26.75”

Shaft: Easton Axis 400

Nock: Easton X-nock

Vanes: (3) 2" Blazer vanes w/6* helical

Broadhead: 100gr Trophy Taker Terminal-T or 100gr RFA Phoenix... Still undecided

Total Arrow Weight: ~386gr

FOC: ~12.3%

 

[pronghorn]

Gold Tip 7595 Prohunters roughly 27"
Gold Tip Accu Lite nock
3-2.5" Vanetec vanes
100 grain heads, either Grim Reapers or Shwackers (Big hole and short trail)
FOC is 11.2%
Total arrow weight was 388
Speed with my Matrix + last year was 304

 

[aggieland]

Victory VAP .350 27.00" 4" feathers 90 grain insert/outsert 200g VPA terminator.. FOC-28% total weight around 540g 200fps out of a longbow ; )

Or 500g total arrow .300 spine FMJ's blazer x vane Epek broadhead 75 grain insert. Carbon element running 305fps..

 

[Jared Bloomgren]

27.5" Carbon Force Radial X-Weave Pro 300.
Wraps and fusion vanes. 100 great Wac'em.
387 total grains at 338 fps.
Works like a dream!

 

[JG358]

Arrow length: 28

Shaft: TR Blast

Nock: Bohning A-nocks

Vanes: 3 QS speed Hunters

4 in wrap

BROADHEADS: 125 Gr VPA Termintor

 

[trophyhill]

GT XT Hunters
arrow length 28 1/8
2" flex fletch
GT factory nocks
this year i switched from my standard go to 100 gr RazorTrick and used a100 gr G5 T3 and got the same result. a 50 yard pass thru right thru the heart/lungs. never did find the arrow so i could inspect it but seeing the holes it left were good enough for me.
total arrow weight 390gr

 

[J-Daddy]

Well being a midwest boy it doesn't look like I'll be mulie hunting this year...But if I were.
GoldTip Velocity 300 like 27.5" long
GT Acculite nock & Insert
4" wrap
3 Blazer vanes, left wing helical "as much as I can get" and all staggered so they look funny, lol.
100gr Shuttle T-Lock broadheads "my favorite fixed blade head"
374grs going 318fps out of my Bowtech D340.

 

[AZCoues]

28" Easton ST Axis 300
Easton X Nocks
Onestringer 4" custom wraps
3 2" Fusion Vanes fletched with AZ Easy fletch (right helical clamp)
100gr Shuttle T-Lock broadheads

Arrow weight 448 grains out of my PSE DreamSeason EVO 6 set at 68.5 pounds

 

[BTROCKS]

27 1/2 Victory V-force 350
Bohning double locks
Blazer vanes/blazer wrap
G5 T3
386 grains 290 FPS