95g TMK Recipes

[Marbles]

Looks like H4350 is 42 gr max.
A4350 is 43.1
IMR 4350 is 40.3.

I'm sure I could get away with a hotter load, especially considering that the SAAMI max PSI is only 60K, but as reliability is an important aspect, I'll stop at book max.

 

[ztc92]

A few updates after trying some additional powders.

Decided to try H4350 again as I have a bunch of it. Also bought a few others to test: H1000, Varget and Win760.

I went to the range this time and used a bench with front/rear rest to be sure there was no influence from me as the shooter.

Much to my surprise, the H4350 load shot WAY better than last time. Barrel is a bit more broken in now (250+ rounds) but I’m wondering if my shooting combined with some mirage was the reason for bad groups with H4350 in my first post.

The Varget also did really well. I was appalled how bad the H1000 shot and the Win760 was acceptable but nothing special.

Next I plan to shoot some larger groups with both H4350 and Varget to see which is more accurate and also get some velocity data. I’m guessing I’ll end up shooting the H4350 load since I have a bunch of it but we’ll see.

All loads with the 95TMK were 2.8” in length. Charge data is in the attached photo.

 

[amassi]

A few updates after trying some additional powders.

Decided to try H4350 again as I have a bunch of it. Also bought a few others to test: H1000, Varget and Win760.

I went to the range this time and used a bench with front/rear rest to be sure there was no influence from me as the shooter.

Much to my surprise, the H4350 load shot WAY better than last time. Barrel is a bit more broken in now (250+ rounds) but I’m wondering if my shooting combined with some mirage was the reason for bad groups with H4350 in my first post.

The Varget also did really well. I was appalled how bad the H1000 shot and the Win760 was acceptable but nothing special.

Next I plan to shoot some larger groups with both H4350 and Varget to see which is more accurate and also get some velocity data. I’m guessing I’ll end up shooting the H4350 load since I have a bunch of it but we’ll see.

All loads with the 95TMK were 2.8” in length. Charge data is in the attached photo.

I’d drop the varget load just in case fill
You’ll certainly not miss the .1 moa precision


Sent from my iPhone using Tapatalk

 

[Nine Banger]

I was appalled how bad the H1000 shot

I was counting on 2.770 48gr H1000 as my quick drop load but I did not record a group because that barrel was wonky.

I'll load some up tonight and try tomorrow in the new barrel just to see and report back.

 

[Nine Banger]

All loads with the 95TMK were 2.8” in length. Charge data is in the attached photo.

I was thinking it was the 2.8" length that might have been the trouble but I got the h1000 load to shoot in my gun.

I'm normally loading this 2.70" like the manual says and they still don't have that much neck contact at that length.

My barrel has sped up and I need to back down the load back to 2775 for quick drop.

58gr H1000 2.800"