7mm WSM

[Tahoe1305]

Nope. I had a 23” barrel as well and those were 2975 with the same load. Neighter had pressure. If I recall I went up another .5g and saw some ejector marks so I came down a smidge.

162s were roughly 100fps more. Both barrels carbon 6.

WSM is great. With the fast powders it’s right on pace with 7PRC only ing a true short action and like 8gr less powder for same performance.

 

[Neilbob]

I had a browning x bolt 7mm wsm that I cut to 20” for a suppressor. Killed plenty of critters with it including elk and nilgai. Settled on a 160 grain accubond with 72 grains of magnum powder for 2900 fps. I picked up a 7mm SS barrel off here and it’s getting rebarreled and cut to 18”. About to sell some 7mm wsm brass and reloading supplies to make room for the Sherman.

 

[Tanner]

I had a browning x bolt 7mm wsm that I cut to 20” for a suppressor. Killed plenty of critters with it including elk and nilgai. Settled on a 160 grain accubond with 72 grains of magnum powder for 2900 fps. I picked up a 7mm SS barrel off here and it’s getting rebarreled and cut to 18”. About to sell some 7mm wsm brass and reloading supplies to make room for the Sherman.

Interested in that brass if you have some that’s once fired or new?

 

[Neilbob]

I have 150 pieces of new hornady brass, and 100+ pieces of multiple fired winchester brass. I am waiting to make sure my 7mm SS barrel gets installed correctly before listing it though. Should know something in a week or two.