7mm rem mag powder

Drifteds

FNG
Joined
Mar 21, 2023
Messages
7
Hello everyone, im just getting started in reloading and i have bought some nosler accubonds 160grs and would like to buy some 162 eldx as well but i dont know what powder i should start out with. Now i have a nosler reloading manual but there is alot of options to chose from and i dont want to buy 3 different powders to start with. Imr 4831 or h1000 are the ones that have peaked my interest the most and Ill be shooting these out of my tikka with a 9.5 twist rate, thanks.
 

LiveFire

FNG
Joined
Oct 3, 2023
Messages
22
Imr7828 consistently gave me the best velocity in 7mm mag. I never did try h1000 since I couldn't find it when I was playing with the 7 mag.
Never did try any other powder either due to local availability but I wouldnt have anyway with the great results I got with IMR7828.
 

logem

FNG
Joined
Jan 18, 2023
Messages
83
Location
Santa Fe, NM
Reloder 22 has been working great for me with 160 Accubonds and 160 Partitions in a 24" barrel. I'm getting velocities of between 2950 and 2970 fps, depending which load I use. I could push it further, but am content with using RL22 at the loads I have now.
 
Joined
Nov 20, 2021
Messages
1,642
Of the powders shared so far, availability could be your biggest concern.

My go-to in a 300 Win is IMR 7828.

That's where I'd start in your 7MM Rem Mag if it was available. Used that when I loaded for a friend in 7mm Rem Mag. Took a look for the load data I came up with, but wasn't able to find it at first glance.
 

TaperPin

WKR
Joined
Jul 12, 2023
Messages
3,255
Reloder 22 has been working great for me with 160 Accubonds and 160 Partitions in a 24" barrel. I'm getting velocities of between 2950 and 2970 fps, depending which load I use. I could push it further, but am content with using RL22 at the loads I have now.
I’m like you - for that weight of bullet r22 worked nicely right off the bat with the three 7 mags I’ve loaded for so I’ve tried very few other powders.
 

logem

FNG
Joined
Jan 18, 2023
Messages
83
Location
Santa Fe, NM
I’m like you - for that weight of bullet r22 worked nicely right off the bat with the three 7 mags I’ve loaded for so I’ve tried very few other powders.
I'm sure that other powders work, but I agree that RL22 is easy-peazy. I think it has low fouling, relatively low blast signature, and decent temperature stability. And you can develop loads in excess of 3000 fps, if you really want to.
 

gman82001

WKR
Joined
Sep 22, 2013
Messages
356
I wanted to try rl22 but good luck finding it these days I had 7828ssc for the weatherbys and once I got a good load was able to actually get enough 7828 to feel comfortable. Alliant is really behind the ball on getting powders to market
 

Harvey_NW

WKR
Joined
Feb 13, 2019
Messages
1,956
Location
WA
My go to was always H1000 for 7RM, always good results with 160 class projectiles. Has recently been in stock pretty often online.
 

CC11

Lil-Rokslider
Joined
Jan 31, 2016
Messages
170
On just about all of our 7mm's and even my 28 Nosler Retumbo has been the magic powder. H1000 and H4831sc would be my next choices
 

CLP

FNG
Joined
May 5, 2017
Messages
58
Location
Denver
I started with H1000 and ultimately settled on VVN550. It was a little faster and gave me much better ES and SD numbers compared to H1000.
 

Point Man

Lil-Rokslider
Joined
Jul 7, 2023
Messages
205
Location
Ohio
You just have to test and see what your rifle / cartridge combination likes for yourself. What somebody might suggest might not be a good choice.
 

btmonnat

FNG
Joined
Nov 27, 2023
Messages
41
Location
Castorland NY
I used reloader 22 and liked it but switched to IMR 4831. My Weatherby Accumark really shoots the best with the 4831 and winchester ballistic Silvertips. This is my long range gun. Considering trying some Accubonds because one of the deer I cut up myself, I found the jacket from the bullet and no lead. Bonded bullets will not shed the jacket
 
Top