7mm PRC & N570

[Shrapnel993]

Hey Fellas,

I just want to say thanks to the group for all this incredible information. I've been following this thread for a while and was trying to develop a load for my rifle using the Berger 175gr Elite Hunter and N570. I wanted to start with the GRT simulation first, which I did, but it took me a bit to get the 7PRC add on. Anyway, I think I've arrived at a good solid hunting load. I've been meaning to post this data over the last couple of weeks but I kept getting sidetracked with work and my kid's sports. Anyway here is where I'm at.

Rifle details:
Gunwerks Nexus
7PRC
24" Barrel
175gr Elite Hunter
Peterson Brass
N570
Federal 215M
COAL 3.388 (.025" Jump)

I took the load out to 700yds and it worked out well. I wasn't able to get group info at extended ranges but my hits were solid.

Thanks again!

 

[Ohiohuntr]

Sd certainly wasn’t good, 72.5 grns still no pressure signs, this is out of a 22” barrel torn between this and h1000

 

[TxAggie15]

I landed at 70g of n570 and a 180 eldm. 18” barrel right at 2835. This was a 8 shot group and some suppressor mirage lol

What did your CTBO end up being? Brass is prepped. Gotta find some 180 ELD-M in stock near me and plan to get this one dialed.

 

[Bevo]

Details:
Tikka action, C6 22" 1:8
MDT HNT 26
175gr Berger EH
Peterson Brass
N570
GM215M
COAL 3.375 (.04" Jump)

The biggest thing I've found with N570 and 7PRC is it really likes the case to be as full as possible. Groups are fine, but the SD/ES numbers don't really tighten up until the case gets really full.

Last time I shot it I got 3107fps with 73.7gr. SD was 6.5 across 5 shots.

I also shot 175 ELD-X with 72.4gr and was at 3077fps.

 

[DEW0341]

Sent from my iPhone using Tapatalk

 

[TxLite]

Sent from my iPhone using Tapatalk

Nice group. Any velocity data?

 

[DEW0341]

Nice group. Any velocity data?

2858 out of 22” proof prefit. 458 rounds down the tube.


Sent from my iPhone using Tapatalk

 

[Wyoming Shooter]

I did some load testing with Hornady 180 ELDM and VV N570 this weekend. These numbers are from a 24" barrel. 5 rounds at each powder weight. The 71 grain load grouped very well.

69 grains = 2873. SD 10.1
70 grains = 2912. SD 10.9
71 grains = 2960. SD 5.5
72 grains = 2985. SD 9.1

 

[wapitibob]

Anybody measure throat erosion yet?

 

[TxLite]

Anybody measure throat erosion yet?

Actively avoiding it actually. Ignorance is bliss lol

Once accuracy starts to degrade I’ll recheck my jump and see where it’s at. I documented where it was when it was unfired

 

[wapitibob]

Yeah, I hear you. I burned out .060 in less than 400 shots in my 7STW with 81 grains and 570.
I’m thinking and hoping 7PRC would be quite a bit better

 

[jeetS]

I did some load testing with Hornady 180 ELDM and VV N570 this weekend. These numbers are from a 24" barrel. 5 rounds at each powder weight. The 71 grain load grouped very well.

69 grains = 2873. SD 10.1
70 grains = 2912. SD 10.9
71 grains = 2960. SD 5.5
72 grains = 2985. SD 9.1

How you feeling about that load? Any further testing? any worries about throat erosion?

 

[Wyoming Shooter]

How you feeling about that load? Any further testing? any worries about throat erosion?

I plan to test an additional 20 rounds at 71 grains. So far, it's a nice load in this rifle. Stand by for an update.

 

[countrykang8]

I have had some success with N570 in my 7 PRC. 73.3gr and 73.4gr across multiple loads. No pressure signs with ADG brass using both large rifle and large rifle magnum primers. With the 175 TSX, I am getting 28 Nosler numbers.