7mm PRC & N570

Joined
Apr 5, 2024
Messages
2
Hey Fellas,

I just want to say thanks to the group for all this incredible information. I've been following this thread for a while and was trying to develop a load for my rifle using the Berger 175gr Elite Hunter and N570. I wanted to start with the GRT simulation first, which I did, but it took me a bit to get the 7PRC add on. Anyway, I think I've arrived at a good solid hunting load. I've been meaning to post this data over the last couple of weeks but I kept getting sidetracked with work and my kid's sports. Anyway here is where I'm at.

Rifle details:
Gunwerks Nexus
7PRC
24" Barrel
175gr Elite Hunter
Peterson Brass
N570
Federal 215M
COAL 3.388 (.025" Jump)

I took the load out to 700yds and it worked out well. I wasn't able to get group info at extended ranges but my hits were solid.

Thanks again!
 

Attachments

  • IMG_5798.PNG
    IMG_5798.PNG
    251.6 KB · Views: 46
  • IMG_5799.PNG
    IMG_5799.PNG
    504.2 KB · Views: 43
  • IMG_5797.jpg
    IMG_5797.jpg
    174.7 KB · Views: 42
  • IMG_5795.jpg
    IMG_5795.jpg
    182.5 KB · Views: 47

Ohiohuntr

Lil-Rokslider
Joined
Aug 25, 2021
Messages
208
IMG_5679.pngSd certainly wasn’t good, 72.5 grns still no pressure signs, this is out of a 22” barrel torn between this and h1000
 

TxAggie15

FNG
Joined
May 29, 2023
Messages
27
I landed at 70g of n570 and a 180 eldm. 18” barrel right at 2835. This was a 8 shot group and some suppressor mirage lol
What did your CTBO end up being? Brass is prepped. Gotta find some 180 ELD-M in stock near me and plan to get this one dialed.
 

Bevo

FNG
Joined
Dec 10, 2019
Messages
13
Details:
Tikka action, C6 22" 1:8
MDT HNT 26
175gr Berger EH
Peterson Brass
N570
GM215M
COAL 3.375 (.04" Jump)

The biggest thing I've found with N570 and 7PRC is it really likes the case to be as full as possible. Groups are fine, but the SD/ES numbers don't really tighten up until the case gets really full.

Last time I shot it I got 3107fps with 73.7gr. SD was 6.5 across 5 shots.

I also shot 175 ELD-X with 72.4gr and was at 3077fps.
 

DEW0341

WKR
Joined
Mar 19, 2016
Messages
462
Location
camp pendleton, ca
ffdcc979b5f75ea8016c2ae07852e915.png



Sent from my iPhone using Tapatalk
 
Joined
Jul 13, 2017
Messages
74
Location
Lander, WY USA
I did some load testing with Hornady 180 ELDM and VV N570 this weekend. These numbers are from a 24" barrel. 5 rounds at each powder weight. The 71 grain load grouped very well.

69 grains = 2873. SD 10.1
70 grains = 2912. SD 10.9
71 grains = 2960. SD 5.5
72 grains = 2985. SD 9.1
 
OP
TxLite

TxLite

WKR
Joined
Sep 6, 2018
Messages
1,888
Location
Texas
Anybody measure throat erosion yet?
Actively avoiding it actually. Ignorance is bliss lol

Once accuracy starts to degrade I’ll recheck my jump and see where it’s at. I documented where it was when it was unfired
 

wapitibob

WKR
Joined
Feb 24, 2012
Messages
5,886
Location
Bend Oregon
Yeah, I hear you. I burned out .060 in less than 400 shots in my 7STW with 81 grains and 570.
I’m thinking and hoping 7PRC would be quite a bit better
 
Top