6mm /.243 hunting success on Big Game

[Chris in TN]

@Wrench is the 106 TAP available in factory form or as a component projectile?

I've never heard it mentioned but remember back int he day when 5.56 TAP was highly sought after. I still have most of a case of it in 5.56.

The factory specs on their 6arc load - a .580BC at 2625' from an 18" - would be hard to beat, I'd think.

 

[ktm450]

Updated: I am processing my Deer and got pics. The shoulders had a lot of blood meat, so I took them off immediately and was able to use them with no meat loss. .243, 103 ELDX, 100 yards, 2950fps straight down hill.

Photo 1 = entry
Photo 2 = exit

Explosive innards to a degree I have not seen before.

 

[clperry]

6 creed, 108 ELDM, 18” prefit and action from @hereinaz. Dropped in bastion stock, with Swfa 3-15. Only 45 rounds down the barrel, loving it so far - remarkable how much more practice you can get in with these 6mms.

~100-120 yards, impact 2600ish fps. Quartering towards, shot off backpack seated, put bullet through front of onside, wound through chest cavity and bloodshot on far shoulder. Photo is taking off far shoulder. Lungs and heart devastated so I’m happy - probably will try ELDX in future just to see how that fares?
View attachment 972282View attachment 972283View attachment 972284

What stock is that?


Sent from my iPhone using Tapatalk

 

[Wrench]

@Wrench is the 106 TAP available in factory form or as a component projectile?

I've never heard it mentioned but remember back int he day when 5.56 TAP was highly sought after. I still have most of a case of it in 5.56.

The factory specs on their 6arc load - a .580BC at 2625' from an 18" - would be hard to beat, I'd think.

I bought them as seconds from midway. I ended up with enough to wear out 5 barrels.....I really like them.

 

[Chris in TN]

I bought them as seconds from midway. I ended up with enough to wear out 5 barrels.....I really like them.

Neat.

I'm asking 6mm question because I'm toying with the idea of building.....ehhh, something between 6ARC on the low end and 6mmCM on the high end. Just trying to sort of build a file in my head of what my options are.

 

[MT_Wyatt]

What stock is that?


Sent from my iPhone using Tapatalk

Peak 44 Bastion. It’s badass. Mine was 22oz.

 

[Wrench]

Neat.

I'm asking 6mm question because I'm toying with the idea of building.....ehhh, something between 6ARC on the low end and 6mmCM on the high end. Just trying to sort of build a file in my head of what my options are.

I did an xc because brass was cheap and performance is very good. 39.5grs of 4350 gets me 2960 from my 21" and 3070 from my 27".

My 22" 6x284 does 3150 for comparison. I'm cool with leaving a bit on the table.