6mm /.243 hunting success on Big Game

Felix40

WKR
Joined
Jul 27, 2015
Messages
1,917
Location
New Mexico
I’ve been working on something very different from most guys here. A reduced recoil hunting load for my son’s 18” 243. I loaded some very mild 87gr vmax for it and did some culling. I’m very happy with terminal performance on animals from deer sized to a little bigger than elk. Not a lot of exits or blood but you don’t need blood if you watch them fall. I wish I had a chronograph to give a speed. All I can say is it’s about 75% of what I would normally load. I know the vmax seems like a bad idea on big animals but going that slow it seems to work beautifully.
 

The Guide

WKR
Joined
Aug 20, 2023
Messages
707
Location
Montana
I’ve been working on something very different from most guys here. A reduced recoil hunting load for my son’s 18” 243. I loaded some very mild 87gr vmax for it and did some culling. I’m very happy with terminal performance on animals from deer sized to a little bigger than elk. Not a lot of exits or blood but you don’t need blood if you watch them fall. I wish I had a chronograph to give a speed. All I can say is it’s about 75% of what I would normally load. I know the vmax seems like a bad idea on big animals but going that slow it seems to work beautifully.
When you slow that 87 VMAX down, it works really good. The 120 NBT does the same in the 6.5 Grendel. In my 260 the 120 is very accurate but a little splashy. At Grendel speeds it just kills.

Jay
 

ktmkaratechips

Lil-Rokslider
Joined
Nov 25, 2021
Messages
105
I’ve been working on something very different from most guys here. A reduced recoil hunting load for my son’s 18” 243. I loaded some very mild 87gr vmax for it and did some culling. I’m very happy with terminal performance on animals from deer sized to a little bigger than elk. Not a lot of exits or blood but you don’t need blood if you watch them fall. I wish I had a chronograph to give a speed. All I can say is it’s about 75% of what I would normally load. I know the vmax seems like a bad idea on big animals but going that slow it seems to work beautifully.
What shot placement have you been trying for? Does the recoil seem reduced enough to make a difference? Sounds great to me!
 

turbo406

FNG
Joined
Jan 2, 2023
Messages
84
Location
406
I’ve been working on something very different from most guys here. A reduced recoil hunting load for my son’s 18” 243. I loaded some very mild 87gr vmax for it and did some culling. I’m very happy with terminal performance on animals from deer sized to a little bigger than elk. Not a lot of exits or blood but you don’t need blood if you watch them fall. I wish I had a chronograph to give a speed. All I can say is it’s about 75% of what I would normally load. I know the vmax seems like a bad idea on big animals but going that slow it seems to work beautifully.
What speed if you had to guess? I'm running them at 2840 out of an 18 inch arc and it shoots wonderfully. Was thinking about trying it on deerthis year
 

Felix40

WKR
Joined
Jul 27, 2015
Messages
1,917
Location
New Mexico
What shot placement have you been trying for? Does the recoil seem reduced enough to make a difference? Sounds great to me!
Bow type shots at 100 yds or less. It’s substantially softer shooting than what I would load for myself (95 nbt close to max). I would say it’s comparable to a 223 ar. The set up is for a 9 year old. He killed an elk last year but I used too hard of a bullet and wasn’t super happy with it.
 

Felix40

WKR
Joined
Jul 27, 2015
Messages
1,917
Location
New Mexico
What speed if you had to guess? I'm running them at 2840 out of an 18 inch arc and it shoots wonderfully. Was thinking about trying it on deerthis year
Wild guess would be around 2350. That’s just about 75% of what factory ammo is listed at while accounting for the 18” barrel. I know velocity:charge isn’t linear but I have nothing else to go on.
 

280Ackley

WKR
Joined
Jun 4, 2014
Messages
846
Location
Idaho
Well the 6ARC with 108 edl-m’s got put to the test this week!! My buddy used my rifle on the 1st bull he was bedded 604 yards. 1 perfect shot behind the shoulder and 2 low but still in the chest cavity. Walked about 20 yards and bedded down. Died in about 4 mins. Blood at the shot sight and the whole way to his bed. Gallons of blood in his chest cavity. Bull recovered in offside under the hide 1/4” still in the shoulder.IMG_6090.jpegIMG_6091.jpegIMG_6096.jpegIMG_6092.jpegIMG_6098.jpeg
 

Spoonbill

WKR
Joined
Jan 15, 2020
Messages
794
Well the 6ARC with 108 edl-m’s got put to the test this week!! My buddy used my rifle on the 1st bull he was bedded 604 yards. 1 perfect shot behind the shoulder and 2 low but still in the chest cavity. Walked about 20 yards and bedded down. Died in about 4 mins. Blood at the shot sight and the whole way to his bed. Gallons of blood in his chest cavity. Bull recovered in offside under the hide 1/4” still in the shoulder.View attachment 772864View attachment 772866View attachment 772865View attachment 772867View attachment 772870
Congrats to your buddy, can you share what rifle he was using?
 
Joined
Jan 13, 2021
Messages
72
Is the reason for a VMAX bullet vs an SST type because of the explosive fragmentation that turns em into organ soup??

Sent from my SM-S921U using Tapatalk
 

MThuntr

WKR
Joined
Apr 10, 2015
Messages
1,061
Location
SW MT
Well the 6ARC with 108 edl-m’s got put to the test this week!! My buddy used my rifle on the 1st bull he was bedded 604 yards. 1 perfect shot behind the shoulder and 2 low but still in the chest cavity. Walked about 20 yards and bedded down. Died in about 4 mins. Blood at the shot sight and the whole way to his bed. Gallons of blood in his chest cavity. Bull recovered in offside under the hide 1/4” still in the shoulder.View attachment 772864View attachment 772866View attachment 772865View attachment 772867View attachment 772870
Any guess at an impact velocity?
 
Top