6mm /.243 hunting success on Big Game

[Big_wals]

I have a Tikka .243 with the 1-10 twist. What is everyone’s favorite bullet for deer and elk? I have been running nosler partitions, but things seem to die slow.

The nosler 95 ballistic tip seems to be the most recommended. Ive only personally seen two deer shot with them, but they worked great.

 

[The Guide]

Why doesn't Hornady make a 95 to 97 grain ELDM for the 6mm. Sure would be nice since Sierra doesn't seem to want to make any 95 TMK for us. Would be a sweet bullet for all those slow twist 6mm's out there.

Jay

 

[kad11]

It’s what they call the 7 flutes.

That little freeloader is a rescue named Taiga.
My wife bottle fed him and he’ll be going back to the wild shortly now.

View attachment 744868

Nice Here's my oldest with one of three we found a few years ago

 

[BjornF16]

I have a Tikka .243 with the 1-10 twist. What is everyone’s favorite bullet for deer and elk? I have been running nosler partitions, but things seem to die slow.

95 NBT is your huckleberry

 

[JRS3]

Burned some powder today with the 6mm. I hunt with 108 gr Hybrids but for factory fodder to plink with, this is tough to beat. The rifle really is fun to shoot.

 

[Edge]

So here's what I'm trying to figure out. I'm torn between a 6 cm or a 243 ai. With a 243 ai, I can run a shorter barrel and still get my goal of 3000 fps or something close. The downside is it seems I may have to try a few powders and then there's the fire forming. With the 6 cm, it seems like 4350 is THE powder. Is it worth it to +p a 6 cm to get a bit more velocity? How short can I go and still get close to 3k shooting either the 108 eldm or 112 match burners? I've been stuck in analysis paralysis for some time, and need to just decide. Also need to sell some rifles and parts to fund this project....

Sent from my Pixel 6 Pro using Tapatalk

Another option is RL16, it will give you velocities above H4350. Have worked up some good loads in both 6 & 6.5 Creed. Next test for RL16 is in a 6XC with 115 DTACs.

Downside if you don’t already have some RL16 on hand is cost, it has gotten outrageously expensive as most of the RL powders.

Another option is 6.5 Staball, I did some velocity tests and it did well, but haven’t gotten down to zeroing in on a load, too many other projects.

 

[CobraChicken]

6.5prc. Standard 143d hornady eldx. Coming out a weatherby vanguard platform with a radial brake.

Shot her at 250 yards. Hit more cows at a distance of 300 to 400 yards. Killed many goats and deer ranging 200 to 550.

For what it's worth always had great expansion and damage in the boiler room.

All elk went down within 20 yards.

 

[letrbuck]

So here's what I'm trying to figure out. I'm torn between a 6 cm or a 243 ai. With a 243 ai, I can run a shorter barrel and still get my goal of 3000 fps or something close. The downside is it seems I may have to try a few powders and then there's the fire forming. With the 6 cm, it seems like 4350 is THE powder. Is it worth it to +p a 6 cm to get a bit more velocity? How short can I go and still get close to 3k shooting either the 108 eldm or 112 match burners? I've been stuck in analysis paralysis for some time, and need to just decide. Also need to sell some rifles and parts to fund this project....

Sent from my Pixel 6 Pro using Tapatalk

Literally having the same internal debate. Have wanted a 243 ackley for damned near ever but pretty sure I'll be buying a 6 creed barrel with norma 107 ammo being very available at $23/box right now

 

[sierracharlie338]

Burned some powder today with the 6mm. I hunt with 108 gr Hybrids but for factory fodder to plink with, this is tough to beat. The rifle really is fun to shoot.

Dam nice rig! what are the details please

nice shooting

 

[JRS3]

Dam nice rig! what are the details please

nice shooting

Thanks!

Deviant GA Hunter
Proof SL 24” 7.5 tw
McMillan REM Hunter Edge
APA DBM
Trigger Tech
SB 4-16x50 Precision Hunter

 

[General RE LEE]

View attachment 748681
6.5prc. Standard 143d hornady eldx. Coming out a weatherby vanguard platform with a radial brake.

Shot her at 250 yards. Hit more cows at a distance of 300 to 400 yards. Killed many goats and deer ranging 200 to 550.

For what it's worth always had great expansion and damage in the boiler room.

All elk went down within 20 yards.

You’re in the wrong thread by 0.5mm

Nice job though.

 

[wind gypsy]

Literally having the same internal debate. Have wanted a 243 ackley for damned near ever but pretty sure I'll be buying a 6 creed barrel with norma 107 ammo being very available at $23/box right now

I'd look for sig 107 SMK, Federal 107 SMK that have been available for similar prices recently first. Even federal GMM berger 105s were on sale around $24/box at midway recently.

Reason being is the norma match stuff ive had has very thick necks on the brass, to where there is less than 2 thousandths clearance on a saami min chamber. There have been some other QC issues too.

 

[The Guide]

I'd look for sig 107 SMK, Federal 107 SMK that have been available for similar prices recently first. Even federal GMM berger 105s were on sale around $24/box at midway recently.

Reason being is the norma match stuff ive had has very thick necks on the brass, to where there is less than 2 thousandths clearance on a saami min chamber. There have been some other QC issues too.

Have you used the Federal GMM 105's much? On game? That's a dang good price! Might have to get some to try.

Jay

 

[SloppyJ]

Literally having the same internal debate. Have wanted a 243 ackley for damned near ever but pretty sure I'll be buying a 6 creed barrel with norma 107 ammo being very available at $23/box right now

Went down this same path. Torn between a Tikka 243 and sending off to AI the chamber and chop the barrel or just building a 6creed. I built an 18" 6 creed and have no regrets. TONs of components. At this point I have a match barrel and a hunting barrel and 400pcs of brass. 2850fps is roughly the max of my 18" barrel with 108s. Currently experimenting with N555 to see if there's any benefit and it's stacking 95 Nosler BTs on top of each other around 3070fps. Again, with the 18" barrel.

With H4350 there's a tiny amount of room in there but I think you're rolling the dice to +p that chamber. With N555, I'm vibrating it down before I seat a bullet. Can't wait to test this on some deer this coming year. Hardest decision is going to be what bullet to try first.

 

[wind gypsy]

Have you used the Federal GMM 105's much? On game? That's a dang good price! Might have to get some to try.

I haven't. That ammo doesn't appeal to me as much for hunting as it does practice/match use.

 

[gabenzeke]

Went down this same path. Torn between a Tikka 243 and sending off to AI the chamber and chop the barrel or just building a 6creed. I built an 18" 6 creed and have no regrets. TONs of components. At this point I have a match barrel and a hunting barrel and 400pcs of brass. 2850fps is roughly the max of my 18" barrel with 108s. Currently experimenting with N555 to see if there's any benefit and it's stacking 95 Nosler BTs on top of each other around 3070fps. Again, with the 18" barrel.

With H4350 there's a tiny amount of room in there but I think you're rolling the dice to +p that chamber. With N555, I'm vibrating it down before I seat a bullet. Can't wait to test this on some deer this coming year. Hardest decision is going to be what bullet to try first.

This is helpful. I think at this point if Peterson started making 243 brass with srp pockets again I'd be settled on the 243 ai.

Sent from my Pixel 6 Pro using Tapatalk

 

[Doodle]

Anybody running one of the hotrods? 6 um, prc, 240 wby, etc?

 

[SloppyJ]

This is helpful. I think at this point if Peterson started making 243 brass with srp pockets again I'd be settled on the 243 ai.

Sent from my Pixel 6 Pro using Tapatalk

I forgot to mention that but the availability of CCI 450s had a lot to do with that decision as well. I have 2k or so of them for my .223 and only 1200 LRPs. The SRP are consistently on the local shelves as well. I'm running that exact stuff, Peterson SRP. If you get the same, start low with your loads and work up. I found pressure quite a bit before book max.

 

[gabenzeke]

I forgot to mention that but the availability of CCI 450s had a lot to do with that decision as well. I have 2k or so of them for my .223 and only 1200 LRPs. The SRP are consistently on the local shelves as well. I'm running that exact stuff, Peterson SRP. If you get the same, start low with your loads and work up. I found pressure quite a bit before book max.

Interesting. Peterson indicates that the srp pockets are specifically for running higher pressures. I'm new to hand loading, so I don't understand enough of the why. I'll have to look into it.

Sent from my Pixel 6 Pro using Tapatalk

 

[khuber84]

Anybody running one of the hotrods? 6 um, prc, 240 wby, etc?

24" 6saum, also have a 6prc being built at 20"