6mm /.243 hunting success on Big Game

[Brap01]

That’s great info. My ruger predator gen 1 223 has some quirky things too but it’s a shooter.

I’d prefer a tikka in ever way. It’s my dream gun but they don’t make one in 6 creed yet. I see a “pre fit” barrel but I’m no gun smith so that’s probably beyond my skill


Sent from my iPhone using Tapatalk

If the twist on the tikka 243 will work for the 108 eldm maybe you can hand load that?

I haven’t looked into that 243 stuff at all but I do plan to throw a prefit 6 CM on my tikka next year

 

[JohnJohnson]

That’s great info. My ruger predator gen 1 223 has some quirky things too but it’s a shooter.

I’d prefer a tikka in ever way. It’s my dream gun but they don’t make one in 6 creed yet. I see a “pre fit” barrel but I’m no gun smith so that’s probably beyond my skill


Sent from my iPhone using Tapatalk

The economical thing would be to wait for Tikka to start chambering in 6CM which is this year apparently. But just so you know PVA and PBB both will install their Tikka prefit on your action for a bit extra.

 

[jadkins223]

The economical thing would be to wait for Tikka to start chambering in 6CM which is this year apparently. But just so you know PVA and PBB both will install their Tikka prefit on your action for a bit extra.

The economical route will most likely be what I end up with. I’ll wait till tikka drops an offering. I’ve always wanted a stainless t3x. Sweet! One threaded would be even better.


Sent from my iPhone using Tapatalk

 

[Taudisio]

The economical route will most likely be what I end up with. I’ll wait till tikka drops an offering. I’ve always wanted a stainless t3x. Sweet! One threaded would be even better.


Sent from my iPhone using Tapatalk

I am in no way talking you out of a tikka as (I believe) they are superior rifles, and I love mine, but I have had zero issues with my gen 2 American in 6 creed. Thing has been shooting lights out, including the bear I posted a few pages back. It will save you a few hundred dollars over the tikka. This was my load development with the 109.

 

[PSDBowhunter]

This thread definitely makes me want a 6mm creedmoor. How many of you had a .243 first and then got the creedmoor? I have a perfectly good .243 in the safe. It's a little hard to justify another gun to shoot a little heavier bullet, but they look like fun!

 

[gman82001]

This thread definitely makes me want a 6mm creedmoor. How many of you had a .243 first and then got the creedmoor? I have a perfectly good .243 in the safe. It's a little hard to justify another gun to shoot a little heavier bullet, but they look like fun!

I had all kinds of brass and powder for 243 already so I went with the 1-8 tikka in a super light. I haven’t even messed with anything heavy I had some 95 Berger factory laying so I wanted to break it in with that and it shot so well I picked up the bullet for reloading and am shooting well under 1” 5 shot groups every single group. I have some heavy eld-m to load but just keep banging away with this 95gr stuff lol. Taking it to maybe get my first bear this weekend.

 

[NWBLKTAIL]

I am in no way talking you out of a tikka as (I believe) they are superior rifles, and I love mine, but I have had zero issues with my gen 2 American in 6 creed. Thing has been shooting lights out, including the bear I posted a few pages back. It will save you a few hundred dollars over the tikka. This was my load development with the 109.View attachment 878491

Been many a time I walked into my LGS and almost bought one of these gen 2’ just to play around with

 

[NWBLKTAIL]

This thread definitely makes me want a 6mm creedmoor. How many of you had a .243 first and then got the creedmoor? I have a perfectly good .243 in the safe. It's a little hard to justify another gun to shoot a little heavier bullet, but they look like fun!

some pretty good offerings out there for 10twist if your guns already a shooter

 

[PSDBowhunter]

some pretty good offerings out there for 10twist if your guns already a shooter

What do you recommend? I have a Savage model 16 in .243. It's a good shooting gun. I'm tempted to put a better scope on it and run some better ammo through it at range.

I'm assuming it is a 1:10 twist.

 

[NWBLKTAIL]

What do you recommend? I have a Savage model 16 in .243. It's a good shooting gun. I'm tempted to put a better scope on it and run some better ammo through it at range.

Factory ammo
-nosler 95NBT
-precision hunter 90eldx
- federal fusion 95
- super performance 95 SST
-Berger/federal 95 Hybrid

I’d give those a college try

 

[jadkins223]

I am in no way talking you out of a tikka as (I believe) they are superior rifles, and I love mine, but I have had zero issues with my gen 2 American in 6 creed. Thing has been shooting lights out, including the bear I posted a few pages back. It will save you a few hundred dollars over the tikka. This was my load development with the 109.View attachment 878491

Good info here man. Would be tough for me to not go this route. Thank you for sharing. Nice rig !


Sent from my iPhone using Tapatalk

 

[Natebonebusta]

What do you recommend? I have a Savage model 16 in .243. It's a good shooting gun. I'm tempted to put a better scope on it and run some better ammo through it at range.

I'm assuming it is a 1:10 twist.

My savage 16fcss weather warrior is a 1/9.25”

 

[PSDBowhunter]

My savage 16fcss weather warrior is a 1/9.25”

Good to know. I'll have to check mine. I'm assuming that was standard.

 

[KyleR1985]

D

Thread 'Mystery 105 tipped bullet at midway'

Dec 17, 2024

Anyone know anything about this bullet?

Factory Second 6mm, 243 Cal (243 Diameter) Bullets 105 Grain Polymer

MidwayUSA has just made a huge purchase of blemished bullets and we are passing the savings to our customers. Blemished bullets are bulk-packaged,...

www.midwayusa.com

Any info would be appreciated, thanks.

• Dude270
• Replies: 70
• Forum: Long Range Hunting

These popped up on Midsouth at .40 cents a piece. Same or higher price than the 108’s.

Curious if anyone has used them to kill anything yet.

 

[justin davis]

This thread definitely makes me want a 6mm creedmoor. How many of you had a .243 first and then got the creedmoor? I have a perfectly good .243 in the safe. It's a little hard to justify another gun to shoot a little heavier bullet, but they look like fun!

That’s what I did. I had a tikka .243. Then I wanted a 6 creedmoor so I got a prefit barrel and put it on that.

 

[nuffgun]

Black bear

---

tikka .243 win 1-8 twist

---

108 eldm

---

141 yard shot

---

impact velocity: 2750

---

bear spun around in circles biting at the wound for roughly 5 seconds, then laid down and gave a couple loud death moans. Entire event was over in about 12 seconds.

 

[gman82001]

Black bear

---

tikka .243 win 1-8 twist

---

108 eldm

---

141 yard shot

---

impact velocity: 2750

---

bear spun around in circles biting at the wound for roughly 5 seconds, then laid down and gave a couple loud death moans. Entire event was over in about 12 seconds.

Beautiful bear. Wondering what powder you’re loading the eldm over? I have a box I’d like to start messing with

 

[nuffgun]

H4831SC

 

[BasicUtahrd95]

Black Bear
Howa Mini 6 ARC
2706 MV with factory Hornady 103 ELDX
Factory Sporter 22” barrel 1:7.5 twist
400 yard shot
2177 Impact Velocity
Slight quartering to shot. Hit on his left side a few inches behind center of center. Exited just in front of his right rear quarter. Definitely not optimal placement considering the angle, but he dropped on impact and never moved. Caliber size entrance, nickel size exit. Lots of bullet/bone fragments near the exit and sloshing inside the body cavity.

 

[ztc92]

Black Bear
Howa Mini 6 ARC
2706 MV with factory Hornady 103 ELDX
Factory Sporter 22” barrel 1:7.5 twist
400 yard shot
2177 Impact Velocity
Slight quartering to shot. Hit on his left side a few inches behind center of center. Exited just in front of his right rear quarter. Definitely not optimal placement considering the angle, but he dropped on impact and never moved. Caliber size entrance, nickel size exit. Lots of bullet/bone fragments near the exit and sloshing inside the body cavity.

That’s a beautiful bear!