6 UM or 6-7PRC?

[longrange13]

Talked with UM end of last week. Confirmed everything and they are supposed to chamber this week. RokStock should be arriving soon so maybe I'll have it for hunting season.

Man, if I were you I’d recommend going 6prc, 6 Saum or if you have to have the horsepower 6um. 6-7prc isn’t it I don’t think. Too much extra powder for no gain. If I could do it again I’d go straight 6prc I think.

 

[GoatPackr]

Man, if I were you I’d recommend going 6prc, 6 Saum or if you have to have the horsepower 6um. 6-7prc isn’t it I don’t think. Too much extra powder for no gain. If I could do it again I’d go straight 6prc I think.

It really isn't that much more powder. I didn't want the extra screwing around and cost of custom dies. Normally I'd jump right at the 6UM but was trying to keep the price down on this one.
It'll be slinging a 90 grn HHT from a 26" 1:7 barrel so it won't be slow. If I don't like it I can always order another barrel and change it.

Kris

 

[wind gypsy]

It really isn't that much more powder. I didn't want the extra screwing around and cost of custom dies. Normally I'd jump right at the 6UM but was trying to keep the price down on this one.
It'll be slinging a 90 grn HHT from a 26" 1:7 barrel so it won't be slow. If I don't like it I can always order another barrel and change it.

Kris

 

[amassi]

View attachment 765593

Sent from my iPhone using Tapatalk

 

[RogerPa]

Not sure where mine is but should be soon for the biuld. Cerakote adds about 9 weeks after it's biult. Tempting to not do that but I think I'll stick with it for now.

When did you guys order?
I ordered in February.


Kris

Just wondering if you’ve had your hands on your 6-7PRC yet? I don’t see any thread specific to this cartridge. I’m still waiting for mine to show up. (Ordered mid-January 2024). A couple of weeks ago the stock was being painted & coated, so I’m hopeful it won’t be long know! Certainly interested in starting loads and the like? I have 500 D-Tacs (115 gr. w/nose rings) waiting for take-off! Thanks for any input.

For the record, I talked to Blaine on Thursday about a 6mm barrel and he said he had to help you neck those down.

 

[GoatPackr]

Just wondering if you’ve had your hands on your 6-7PRC yet? I don’t see any thread specific to this cartridge. I’m still waiting for mine to show up. (Ordered mid-January 2024). A couple of weeks ago the stock was being painted & coated, so I’m hopeful it won’t be long know! Certainly interested in starting loads and the like? I have 500 D-Tacs (115 gr. w/nose rings) waiting for take-off! Thanks for any input.

Yes picked it up around the end of October.
I'm really liking it. My 14 year daughter is shooting it well also.
I'm running the 90HHT in a 26" 7 twist @3560 right now with a full case at 71 gr of N570. I've got more out of it but was having trouble with RL26 giving good ES. Out of a 5 shot string I'd get one crazy one. I wasn't set up with the right bushings for neck tension. I eventually made an expanding mandrel that got it better with the N570.
Eventually I'll play with RL26 again and a crimp die and see what I can do.
I'm really liking that RokStock. I'm planning to biuld a couple more rifles on that stock and the Tikka action. Hopefully one of the UM clones when they get them out.

 

[The Fish Box]

@GoatPackr what is this um clone you speak of?

 

[Windblown907]

@GoatPackr what is this um clone you speak of?

They are making a custom action that is a tikka clone instead of a Rem 700 footprint. I don’t think they have announced a release date yet.

 

[wind gypsy]

They are making a custom action that is a tikka clone instead of a Rem 700 footprint. I don’t think they have announced a release date yet.

Curious to know more of the details assuming they'd vary from tikka spec on some things.. Like an impact or origin barrel tennon spec would be nice for example.

 

[GoatPackr]

@GoatPackr what is this um clone you speak of?

In the Shoot2hunt podcast they have made mention of a Tikka bolt with changeable bolt face and a clone Tikka action that is coming. Probably in 2026

 

[RogerPa]

Yes picked it up around the end of October.
I'm really liking it. My 14 year daughter is shooting it well also.
I'm running the 90HHT in a 26" 7 twist @3560 right now with a full case at 71 gr of N570. I've got more out of it but was having trouble with RL26 giving good ES. Out of a 5 shot string I'd get one crazy one. I wasn't set up with the right bushings for neck tension. I eventually made an expanding mandrel that got it better with the N570.
Eventually I'll play with RL26 again and a crimp die and see what I can do.
I'm really liking that RokStock. I'm planning to biuld a couple more rifles on that stock and the Tikka action. Hopefully one of the UM clones when they get them out.

Thank You for your input and load details!

 

[Schmo]

Curious to know more of the details assuming they'd vary from tikka spec on some things.. Like an impact or origin barrel tennon spec would be nice for example.

I don’t think so. From what they said on the podcast, the UM clone would be fully interchangeable with Tikka actions. Bolts would interchange between the two. I believe triggers will as well. That makes be believe the tenon spec would be same as existing Tikka. No release date yet.

 

[SloppyJ]

Just wondering if you’ve had your hands on your 6-7PRC yet? I don’t see any thread specific to this cartridge. I’m still waiting for mine to show up. (Ordered mid-January 2024). A couple of weeks ago the stock was being painted & coated, so I’m hopeful it won’t be long know! Certainly interested in starting loads and the like? I have 500 D-Tacs (115 gr. w/nose rings) waiting for take-off! Thanks for any input.

I ended up going with another zermatt and I built this one in 6 creed. When that barrel is done I will go to more of a hotrod. I wanted to shoot some long range with this one so the barrel life was a factor. I think I'll get about one more year on it and I've built a dedicated target rig.

 

[rifletuner]

This came up in my youtube feed last night. Another version of the 6-7PRC. For some stupid reason I looked at the comments - its almost 100% people saying "Roy Weatherby came up with the 257 WBY in 1948. How is this any different".

 

[GoatPackr]

This came up in my youtube feed last night. Another version of the 6-7PRC. For some stupid reason I looked at the comments - its almost 100% people saying "Row Weatherby came up with the 257 WBY in 1948. How is this any different".

I crossed the 4k line when playing with some 87 AH hammers and RL26. Was over 3800 with the 90HHT and RL26.

 

[Titanmoose]

Where does one source a reamer or reamer spec that someone maybe will to share for a 6-7.....I have on 700 LA that could be turned into a fun antelope gun......

 

[Axlrod]

Where does one source a reamer or reamer spec that someone maybe will to share for a 6-7.....I have on 700 LA that could be turned into a fun antelope gun......

I had Unknown Munitions chamber mine. I call it the 6 Rokum. Here is their reamer print:

 

[Okbow87]

Travis Stevens at TS Customs or Joe Walls for the 6.7 power stroke reamer.

 

[Titanmoose]

Travis Stevens at TS Customs or Joe Walls for the 6.7 power stroke reamer.

TS wont build on on a factory action. however, I have a smith with a number in line for a reamer and is adding to his arsenal and local so its all good.

 

[IrkedCitizen]

TS wont build on on a factory action. however, I have a smith with a number in line for a reamer and is adding to his arsenal and local so its all good.

Not missing out. He supports people who continually receive wildlife violations and subsequent court cases.