6 UM or 6-7PRC?

[IrkedCitizen]

Sent from my iPhone using Tapatalk Pro

Progress?

 

[Ryan Avery]

Progress?

Waiting for the action to come back from nitride.


Sent from my iPhone using Tapatalk Pro

 

[GoatPackr]

any progress on the 6-7PRC?


 Kris

 

[Ryan Avery]

any progress on the 6-7PRC?


 Kris

Should have it together next week.

 

[Axlrod]

Should have it together this next week.

Sweet! Please post some data when you can. Mine is at UM now, 6-8 weeks out. Tikka/ with action mods/nitride/20" 7.5 twist Bartlein #3/ Rokstok. I picked up my Scythe-Ti today, after an unbearable 12 day wait!

 

[longrange13]

Sweet! Please post some data when you can. Mine is at UM now, 6-8 weeks out. Tikka/ with action mods/nitride/20" 8 twist Bartlein #3/ Rokstok. I picked up my Scythe-Ti today, after an unbearable 12 day wait!

Hopefully mine will be finished up shortly after Ryan’s. Same specs as yours but with an ace #2 sporter and 1-7.5 twist.

I hope my scythe clears that fast. Just finalized it 7 days ago.

 

[Primerless]

Oh boy, I’ll wait and see as well. I have the Peterson brass in hand and am about ready to order the barreled action. Considered a .25-7prc for a bit too.

 

[longrange13]

@Ryan Avery what’s the consensus on the 115 dtacs through a suppressor with 1-7.5 twist? Deep cuts or normal cut?

 

[Ryan Avery]

@Ryan Avery what’s the consensus on the 115 dtacs through a suppressor with 1-7.5 twist? Deep cuts or normal cut?

Yes. 7.5 Twist either cut is fine.

 

[longrange13]

On a side note I just talked to a guy that had one built. He did a 1-9 twist and is cranking hornadys new 80gr eld-vt at 4010fps. I think he said it’s 12.5moa of drop at 1000 yards lol.

 

[GoatPackr]

On a side note I just talked to a guy that had one built. He did a 1-9 twist and is cranking hornadys new 80gr eld-vt at 4010fps. I think he said it’s 12.5moa of drop at 1000 yards lol.

What barrel length?

Kris

 

[longrange13]

What barrel length?

Kris

26” I believe, but I’ll verify

 

[GoatPackr]

26” I believe, but I’ll verify

That's what I'm going with and no muzzle brake.

Kris

 

[longrange13]

That's what I'm going with and no muzzle brake.

Kris

24” was what he did

 

[GoatPackr]

On a side note I just talked to a guy that had one built. He did a 1-9 twist and is cranking hornadys new 80gr eld-vt at 4010fps. I think he said it’s 12.5moa of drop at 1000 yards lol.

Any idea what his load is?

Kris

 

[longrange13]

Any idea what his load is?

Kris

72grns rl26 I believe

 

[SloppyJ]

Sub'd for some results!

With the upturn in ATF approval times I've decided to start my short(er) action build to match the 300prc I just wrapped up and go ahead and order my next two cans, a wolfhunter and a Scythe.

 

[snopro176]

Super curious how this turns out. You going to lean towards the dtac's or the 108s?

Sent from my SM-S911U using Tapatalk

 

[Ryan Avery]

Making 6-RokUms


Sent from my iPhone using Tapatalk Pro

 

[longrange13]

Making 6-RokUms


Sent from my iPhone using Tapatalk Pro

Let’s see a picture of that rifle!