6 Dasher with light bullets and barrel length

[abnorm]

I'm looking to build my next predator rifle and I'm leaning towards building a 6 dasher. I'm looking for any input on folks that have been running the light varmint bullets and with what barrel length? My second question is about next turning the 6 dasher brass. is that only for when using 6 br brass? If i buy head stamped 6 dasher brass all is good?

 

[wind gypsy]

Make sure you get a chamber that plays nice with whatever brass you chose.

 

[Conrad]

With light varmint bullets the dasher will give you plenty of speed. Question is how long are you going to run your barrel, and are you considering suppressed?

In regards to brass, just buy Alpha and be done. I'd recommend running detachable mags for excellent feeding--either the MDT 6BR mags or the Hawkins Hunter mags with spacer kit. Hawkins if you want a flush mag.

That said you could just run a 6 Creed and make things a little more simple.

 

[abnorm]

With light varmint bullets the dasher will give you plenty of speed. Question is how long are you going to run your barrel, and are you considering suppressed?

In regards to brass, just buy Alpha and be done. I'd recommend running detachable mags for excellent feeding--either the MDT 6BR mags or the Hawkins Hunter mags with spacer kit. Hawkins if you want a flush mag.

That said you could just run a 6 Creed and make things a little more simple.

Id like a shorter handy rifle but if i need to go long its not the end of the world and unfortunately i don't have the opportunity to run suppressed. Ill be going mdt mags for sure with their new bottom metal. 6 creed is definitely more simple but there is something about that short case that does it for me

 

[Dmoua]

You can buy Alpha 6 Dasher brass and avoid fire forming and neck turning.

 

[6.5x284]

You can buy Alpha 6 Dasher brass and avoid fire forming and neck turning.

This is the way. Worth waiting it out of stock.


Sent from my iPhone using Tapatalk

 

[Dmoua]

Shows in stock at blue collar.

Alpha 6mm Dasher Brass with OCD Technology

Product Information Cartridge: 6mm Dasher Finish: Brass Condition: New Quantity: 100 or 500ct *Same Lot Number Primed: No Primer Size: Small Primer Pocket *This is not loaded ammunition.

www.bluecollarreloading.com

 

[SeanM243]

Did you ever end up doing this? Have been thinking about a suppressed 16.5" 6 Dasher for a truck gun shooting 87s or 95s.

 

[Bert01]

I think the neck turning has more to do with which reamer you use and how tight the neck is. There are different reamers for a “no turn” neck. I think my reamer is .270 or bigger, I can’t remember off the top of my head.

 

[abnorm]

Did you ever end up doing this? Have been thinking about a suppressed 16.5" 6 Dasher for a truck gun shooting 87s or 95s.

I ended up going with a 6bra, the rifle will hopefully be done this fall depending on when the stock arrives!

 

[SeanM243]

Good deal! Keep us posted. Very cool choice. Thanks very much for the reply.

 

[abnorm]

Here is the finished product!

-EM Pulse action (Curtis Scout) with switch lug
-26” 8 twist ibi carbon hunter barrel chambered in 6bra
-Manners LRH stock in the high plains camo
-MDT precision bottom metal
-MDT premier rings
-2.5-20x50 Nightforce NX-8
-Trigger tech special with skeletonized shoe

 

[rcompart]

That’s a beauty of a build! Now that you’ve had it for a month, how are you liking everything in your setup? Anything you would change if you did it again?