6 Dasher thread

2575 average over first 20. This lot of varget is old and slow but im just gonna burn up the last bit I have. I was 200fps under book numbers with it in my 22-250.

What brass? Just wondering if Alpha brass plays nice with the PBB reamers.
 
Here’s today’s shooting. All 30 grains varget and loaded at .030-.040 off lands.
112 matchburner 2575 fps again 1.835” Cbto
108 ELDM- 2595 1.81” CBTO
108 Elite hunter- 2571 1.815”

CCI 450 primer
Alpha brass

Mirage wasn’t great, but I had loaded ammo and this thing is too fun to shoot 😎
 

Attachments

  • IMG_5555.jpeg
    IMG_5555.jpeg
    514.4 KB · Views: 16
  • Like
Reactions: HGL
Finally managed to get to the range with my new Tikka Dasher. 18” McGowan 1:8 tikka lite profile flared up at the muzzle for 5/8 threads, RS lite, credo 2-10, OG6s. Funny, I bore sited it before it went in the stock. Once I got it zeroed, the turrets ended up back at zero for elevation, 1 click off for windage. Guess that makes it easy to switch this one back and forth to the 7-08 Ackley that was on this action last. Was shooting ammo loaded for my heavy Tikka Dasher I recently sold. 108 VLD, mild load of Varget gets 2585, was 2815 in my 26” gun. Shot a 15 round group at just under 1.5” to verify zero, opened up at the end then noticed the can had shot loose, so will probably shoot tighter than that. Joy to shoot for sure.


Sent from my iPhone using Tapatalk
 
Back
Top