6 Dasher thread

[NoDakhunter]

The Tikka dasher is born. PBB 20” hybrid lite with the long freebore (.154).

Threw 30 grains of varget in with a 112 MB and loaded 20 at my mag length using @pods8 (Rugged Stitching) 6 arc mag. So far it’s feeding well.

 

[pods8 (Rugged Stitching)]

The Tikka dasher is born. PBB 20” hybrid lite with the long freebore (.154).

Threw 30 grains of varget in with a 112 MB and loaded 20 at my mag length using @pods8 (Rugged Stitching) 6 arc mag. So far it’s feeding well.

Sweet, what speeds?

 

[NoDakhunter]

Sweet, what speeds?

2575 average over first 20. This lot of varget is old and slow but im just gonna burn up the last bit I have. I was 200fps under book numbers with it in my 22-250.

 

[HGL]

2575 average over first 20. This lot of varget is old and slow but im just gonna burn up the last bit I have. I was 200fps under book numbers with it in my 22-250.

What brass? Just wondering if Alpha brass plays nice with the PBB reamers.

 

[NoDakhunter]

What brass? Just wondering if Alpha brass plays nice with the PBB reamers.

Alpha brass. .274 neck on the pbb reamer. I’m pretty new to all this stuff so I’m hoping I get it right on the first go.

 

[wind gypsy]

What brass? Just wondering if Alpha brass plays nice with the PBB reamers.

It looks like they use alpha reamers.

 

[NoDakhunter]

Here’s today’s shooting. All 30 grains varget and loaded at .030-.040 off lands.
112 matchburner 2575 fps again 1.835” Cbto
108 ELDM- 2595 1.81” CBTO
108 Elite hunter- 2571 1.815”

CCI 450 primer
Alpha brass

Mirage wasn’t great, but I had loaded ammo and this thing is too fun to shoot