6.5 PRC 156 Berger Elite hunter load help

CRJR45

WKR
Joined
Jun 24, 2022
Messages
1,111
Location
SE Flo-Ree-Duh
Ok , which powder would you try first of what I have

RE19
RE23
RE25
H4831SC
V570

Using ADG brass and which primers Fed 215 or CCI200

I need all the help I can get , usually .

Thanks
 
Joined
Jul 31, 2014
Messages
791
Location
Colorado
H1000, N565, or RL26 will give you the best velocities if you can get your hands on any of those.

Out of your list RE25 and H4831SC are faster burning than ideal and N570 is slower burning than ideal. All 3 will probably work but you'll be leaving velocity on the table.

My 6.5 PRC does fine with standard large rifle primers, and I went that route when most people said they were hitting pressure at lower velocities with the magnum primers.
 

huntnful

WKR
Joined
Oct 10, 2020
Messages
2,164
With a 156 you can just shoot a full case of N570 and be at the cusp of pressure as well as top speeds. 59-60gr.
 
Joined
Jan 12, 2017
Messages
819
Location
Idaho Falls,ID
Rl 25 with the 156 Berger has worked well for me out of a Christensen Mesa and 2 Seekins PH2's. Around 2975 fps with 59 grains charge weight. One of the Seekins prefers 58.4 grains at 2927 fps. They've killed elk, mulies, rockchucks, and antelope from up close to way out there. Unfortunately, it's getting just about impossible to get RL powders, and probably will be for quite a while. I'm going to re-do load development with N565 and H1000 soon so that I don't have to worry about getting RL25. If you have a good supply, go for it. If not, get some N565 and/or H1000 and go from there. The 156 is a great bullet that kills quick and is fairly simple to tune to your rifle.
 
Joined
May 26, 2019
Messages
323
H4831SC has worked great for me. Once barrel broke in ended up with 2940 fps and that wasn’t pushing hard at all. I know 5 other guys shooting the same load great combo for everyone I know that tried it.
 
OP
CRJR45

CRJR45

WKR
Joined
Jun 24, 2022
Messages
1,111
Location
SE Flo-Ree-Duh
Rl 25 with the 156 Berger has worked well for me out of a Christensen Mesa and 2 Seekins PH2's. Around 2975 fps with 59 grains charge weight. One of the Seekins prefers 58.4 grains at 2927 fps. They've killed elk, mulies, rockchucks, and antelope from up close to way out there. Unfortunately, it's getting just about impossible to get RL powders, and probably will be for quite a while. I'm going to re-do load development with N565 and H1000 soon so that I don't have to worry about getting RL25. If you have a good supply, go for it. If not, get some N565 and/or H1000 and go from there. The 156 is a great bullet that kills quick and is fairly simple to tune to your rifle.
Hmmm, I have 9 lbs of RE25 , but I orded the H 1000 already . Oh well , can never have too much powder .
 

Jmort1754

WKR
Joined
Aug 17, 2018
Messages
1,641
H4831SC has worked great for me. Once barrel broke in ended up with 2940 fps and that wasn’t pushing hard at all. I know 5 other guys shooting the same load great combo for everyone I know that tried it.
Where did you start with 4831, I never saw that much speed but never worked with it that much.

Using Lapua Brass Rem LRP, and 56-57 H1k Was a deadly combo. ES 15 Sd 4 2895 AVG of 10 shots all under MOA.
 
Top