300 win mag

[Cinchy52]

I use H1000 & RL 17 in 1 of my 300 mags. I use RL 17 with 190 gr. Nosler Accubond LR , {the Nosleer manual lists it as most accurate for 190 gr } & my gun likes it with the Hornday ELD-x 178 grain. I never see anyone recommend RL17 but it works for me!

 

[ryleecarr2006]

I use H4350 with pretty good results.

 

[gelton]

For .300WM H1000 and Berger 215 Hybrids were all the rage several years back, surprised no one has brought them up. They worked very well for me but I decided to go a different direction and sold off a couple hundred of the Bergers...now I want to switch back and can't find em' anywhere.

 

[dsmiley]

My 300 liked ramshot magnum with 180gr barnes ttsx and 7828ssc with 200gr eldx. I ran h1000 as well but my gun did not like as much.

 

[Miflatlander91]

For .300WM H1000 and Berger 215 Hybrids were all the rage several years back, surprised no one has brought them up. They worked very well for me but I decided to go a different direction and sold off a couple hundred of the Bergers...now I want to switch back and can't find em' anywhere.

I'm in the same boat just loaded some 208 bergers with h1000 well see where that gets me.

I also had incredible luck with rl23 and 181 hammer hunters with a slight crimp they just plain shot

Sent from my SM-G998U using Tapatalk

 

[Wyo82939]

I was having a hard time finding what worked best out of my rifle using 200 gr ELD-X. When I finally tried pushing them with 75 gr of H 1000, accuracy is great, don't know how fast it is

 

[Highlander1]

I shoot Berger 210 vld’s with reloder 26 out of my 300wm. It’s a tack driver and shoots 3038fps when I ran it through the chronograph. Reloder 26 is a great powder but hard to get. H1000 shot well but was about 50fps slower. H1000 is less temperature sensitive apparently.

 

[Etxaggie]

Have several 300WMs. I have been unable to find one that does not shoot well with proper load development and H1000. I've tried Retumbo, 4831sc and RL. I tend to avoid RL due to (real or imagined) temp instability.

 

[wind gypsy]

RL23 is supposed to be as stable as anything.

 

[sodaksooner]

Running 70.5 grains of 4831 with 178 eldx. 3080 fps of of my ph2. Have printed a 1/2 moa group with that load. Sticks around 1moa give or take. I have run it up to 73 grains but get a lot of flyers. I have some H1000 I just picked up but will wait till deer season in 3 weeks is over to start playing. Not terribly concerned with more velocity than that, just want a reasonably accurate load