300 Win Mag recommendations… Thank you!!!

492slayer

FNG
Joined
Nov 10, 2022
Messages
9
I'm a Browning fan, having used their rifles and shotguns for almost 50 years. The X-Bolt Speed in .300 WinMag, checks nearly all your boxes. Synthetic stock, Cerakote, muzzle brake, recoil is less than an '06. And MSRP of $1479.
 
OP
everestwc

everestwc

FNG
Joined
Jul 24, 2014
Messages
34
Thanks to all for their suggestions. I ended up with a great deal on a Weatherby MKV Hunter. Ordered the $60 accu brake on Weatherbys site. Total weight 8lbs 10oz. With Leupold VX5, Leupold rail and rings.
10 oz heavier than my Weatherby SS 30-06.

Hopefully it shoots good. Planning on 180gr for elk/ mule deer hunt. Suggestions on 180gr elk ammo?

Thanks again!

02d6a8145b1bb174b80e89ec39ce0e66.jpg
 

KenLee

WKR
Joined
Jun 9, 2021
Messages
1,715
Location
South Carolina
Thanks to all for their suggestions. I ended up with a great deal on a Weatherby MKV Hunter. Ordered the $60 accu brake on Weatherbys site. Total weight 8lbs 10oz. With Leupold VX5, Leupold rail and rings.
10 oz heavier than my Weatherby SS 30-06.

Hopefully it shoots good. Planning on 180gr for elk/ mule deer hunt. Suggestions on 180gr elk ammo?

Thanks again!

02d6a8145b1bb174b80e89ec39ce0e66.jpg
Accubonds
 
Joined
Dec 2, 2022
Messages
352
Location
Southest Michigan
Thanks to all for their suggestions. I ended up with a great deal on a Weatherby MKV Hunter. Ordered the $60 accu brake on Weatherbys site. Total weight 8lbs 10oz. With Leupold VX5, Leupold rail and rings.
10 oz heavier than my Weatherby SS 30-06.

Hopefully it shoots good. Planning on 180gr for elk/ mule deer hunt. Suggestions on 180gr elk ammo?

Thanks again!

02d6a8145b1bb174b80e89ec39ce0e66.jpg

Let us know how it shoots!!!

I’m currently debating between this and tikka T3x roughtech ember..


Sent from my iPhone using Tapatalk
 

TheHammer

WKR
Joined
Aug 1, 2022
Messages
530
Location
juneau wi
By far the best shooting rifle I have. There are a couple things I do not like about it. But I wouldn’t hesitate to suggest purchase with the highest regards.
 

Attachments

  • 4275D849-2C51-451F-9945-5A726C7FE65E.jpeg
    4275D849-2C51-451F-9945-5A726C7FE65E.jpeg
    388.5 KB · Views: 70

Bouldar

Lil-Rokslider
Joined
Apr 15, 2022
Messages
186
From what I hear, Tikka is hard to beat for the price. I do t have one though. I think that is what I would get if I was buying factory.
Bergara just came out with a new rifle with a carbon stock. Looks cool but is $2000 msrp.
 
OP
everestwc

everestwc

FNG
Joined
Jul 24, 2014
Messages
34
Let us know how it shoots!!!

I’m currently debating between this and tikka T3x roughtech ember..


Sent from my iPhone using Tapatalk
Will do. Going to order break it in according to Weatherby's specs and see how it goes.
 
Joined
Aug 23, 2014
Messages
4,973
Location
oregon coast
Hello all…

I currently have a 20 year old Weatherby MKV 30-06 in stainless/ synthetic stock. I really like the rifle and am going to give it to my son as his first big caliber rifle.

I’m looking for a $1000-2000 ($2500 if I can’t live w/out it) NEW rifle in 300 win mag.

Wants: Synthetic stock (carbon could be cool) Cerakoted, threaded barrel (carbon would be cool) muzzle brake, reliable good shooting gun, 7 lb or less.

I’m not a professional marksman but would like a MOA capable rifle with premium store bought ammo.

Considering these rifles in no order:
-Tikka T3X Lite Roughtech (I really don’t like the way Tikka stocks feel, biggest negative to me, but I like the Roightech the most of the Tikka stocks. I also don’t think the action on the Roughtech is cerakoted.). $1100

-Weatherby MKV Hunter (7.3 lbs is the negative)
$1200

Christensen Mesa FFT (Reviews are inconsistent)
$1600

Christensen Ridgeline (Reviews inconsistent.)
$1800

Any other recommendations?????


THANKS!!!
My vote is a t3 lite and put an aftermarket stock on, best of both worlds and still well within budget, lots of options for aftermarket support for tikka
 
Joined
Oct 29, 2021
Messages
90
Is the Seekins better than the win 70? I love the look of the ph 2,but haven't put my paws on yet.
Different, better depends on the feature set you are looking for. Winchester has a sporting stock, and I think looks better. I also like the internal box mag. Seekins is more modern stock for prone, box magazine. I like the EW stock but I know some don’t. They both shoot sub moa but I get better groups with Seekins. I feel ew balances better with a can. They are both great guns but one is more modern rifle vs traditional. You won’t be disappointed with either.
 

ddd122

FNG
Joined
Feb 14, 2016
Messages
62
Location
pa
I ended up getting a mark V hunter in 280 ackley then bought a peak 44 stock sent it to get bedded that gun really seems to like 140 accubonds and it’s almost as light as my backcountry ti in 6.5 rpm
 

Attachments

  • 23A4AA35-1977-4F06-9128-AB0D2A1E13C9.jpeg
    23A4AA35-1977-4F06-9128-AB0D2A1E13C9.jpeg
    346.7 KB · Views: 42
  • CC234556-1D03-41A6-8FA3-5CDF2046DDB6.jpeg
    CC234556-1D03-41A6-8FA3-5CDF2046DDB6.jpeg
    317.1 KB · Views: 40

DuckDogDr

WKR
Joined
Aug 24, 2019
Messages
641
I just purchased a Christensen 300 Ti; was having trouble getting it to shoot… turns out user error likely to blame with my fat fingers and getting torqued to specs on scope mounts.

Initial grouping following re-mounting of scope much improved. Talking with my gunsmith buddy either you get a good one or a bad one.

He said 1/2 of the ones he has to look at; chambers are out of Sammi spec. My chamber measured fine, he bore scoped the entire barrel and saw no defects … he was looking for a reason to send it back and get me in one of his rifles 😂.. (He got set up to build AFTER I purchased this for the record)…Planning to re-shoot this week to confirm is shooting like it’s supposed to .

Highlighted group is after bases are-torqued and locktite

F4BDCF47-19F5-4D1A-89FE-A4A154C8BBE7.jpeg
 

ladogg411

Lil-Rokslider
Joined
Jan 11, 2023
Messages
150
All those are fine options.

I wouldn't buy another .30 magnum for any reason. Especially not just for elk. Too many guys flinch.

It's awfully nice to shoot a tame gun where you can always stay in your scope and watch bullet impact.
 

Ehiggins

WKR
Joined
Dec 15, 2014
Messages
335
Bergara Canyon checks all your boxes but is at the top of the price range


Sent from my iPhone using Tapatalk
 

LRI_Chad

FNG
Joined
Jan 10, 2020
Messages
39
One from a couple of years ago.

P64 M70 fitted to a McMillan M40A1 stock. I used this as the test mule for (at the time) our new M70DBM setup. The idea is a magazine that looks like a hinged floor plate. -I whacked the bottom off an AI magazine, machined a plate to look like the lid, and soldered the mag box to it. I ended up making a follower as well so that it'd still take three cartridges.

The magazine does look a little funny. This particular gun is a family heirloom piece with a #### digit serial number. I was not about to cut the action to bits for the AI long-action magazine. Whizzing the 45* off the front and adding a Delrin block was my solution.

Notice also how the trigger guard lacks the "soviet" looking lump of material in the front for the release lever to attach to. Instead, I made the Obendorf latch with a T-slotted linkage to move the release tab to/from the louver on the back of the magazine.
 

Attachments

  • 1673470662258.png
    1673470662258.png
    1.4 MB · Views: 20
  • 1673470678288.png
    1673470678288.png
    1.6 MB · Views: 19
  • 1673470621247.png
    1673470621247.png
    1.5 MB · Views: 19
  • 1673470115729.png
    1673470115729.png
    714.4 KB · Views: 19
  • 1673469789656.png
    1673469789656.png
    735 KB · Views: 20
  • 1673469755813.png
    1673469755813.png
    494.4 KB · Views: 21
  • 1673469725860 (1).png
    1673469725860 (1).png
    878.3 KB · Views: 22
OP
everestwc

everestwc

FNG
Joined
Jul 24, 2014
Messages
34
I ended up getting a mark V hunter in 280 ackley then bought a peak 44 stock sent it to get bedded that gun really seems to like 140 accubonds and it’s almost as light as my backcountry ti in 6.5 rpm
ddd122.... Love those stocks! Looks great, do you know the difference in weight compared to the hunter stock? What is the total weight now? How does it shoot now? Recoil etc...

Thanks!
 
Joined
Feb 5, 2014
Messages
1,323
Location
Tulsa Ok
Glad you found one you like. I had the same debate about a year ago and went with the PH2. Still working on loads but really like the rifle. If the Weatherby doesn't work out, don't hesitate to look at the Havak.
 

Attachments

  • seekins.jpg
    seekins.jpg
    212.8 KB · Views: 28
Joined
Jan 3, 2023
Messages
47
Hello all…

I currently have a 20 year old Weatherby MKV 30-06 in stainless/ synthetic stock. I really like the rifle and am going to give it to my son as his first big caliber rifle.

I’m looking for a $1000-2000 ($2500 if I can’t live w/out it) NEW rifle in 300 win mag.

Wants: Synthetic stock (carbon could be cool) Cerakoted, threaded barrel (carbon would be cool) muzzle brake, reliable good shooting gun, 7 lb or less.

I’m not a professional marksman but would like a MOA capable rifle with premium store bought ammo.

Considering these rifles in no order:
-Tikka T3X Lite Roughtech (I really don’t like the way Tikka stocks feel, biggest negative to me, but I like the Roightech the most of the Tikka stocks. I also don’t think the action on the Roughtech is cerakoted.). $1100

-Weatherby MKV Hunter (7.3 lbs is the negative)
$1200

Christensen Mesa FFT (Reviews are inconsistent)
$1600

Christensen Ridgeline (Reviews inconsistent.)
$1800

Any other recommendations?????


THANKS!!!
I personally would go with Tikka… I have a couple of them and with factory ammo I can get 5 shots in the size of a nickel. Super amazing rifle, Norwegian companies can build some guns!
 
Top