30-06 barrel cutdown results

[PLhunter]

If your interested in experimenting, load some 168’s with imr 4064 and you’ll see better velocity. I get 3k in multiple rifles with 24” barrels and 2850 from the same load in a 18” barrel.

I never hit pressure when I loaded with Staball and got to 2840 with my 19 inch tube. Have to see if my dad has some 4064 to play around with.

 

[Coopsdaddy]

Just had a fieldcraft cut to 18,have not shot it yet though.

 

[MallardSX2]

If a person is cutting to 18” why not just keep going to the legal minimum? Serious question.

 

[Burnt Reynolds]

If a person is cutting to 18” why not just keep going to the legal minimum? Serious question.

I thought about it, and still might. My can was in jail for 9 months and I still hadn't made up my mind when I finally got my stamp about a month ago. One of my great concerns was balance intersected with reducing overall length and velocity. My gun shot great and carried great without the can.

 

[Burnt Reynolds]

Let us know about results, this is what I’m thinking of doing also.


Sent from my iPhone using Tapatalk

My magnetospeed isn't reading velocity with the can on. Irritated. Until I decided I'm going to get a Xero today.

All I have on hand right now is two boxes of factory 178 ELDX, should be a good starting point.
FYI, factory Barnes 175 LRX was 2765 fps out of my barrel before it was cut.

 

[thinhorn_AK]

My magnetospeed isn't reading velocity with the can on. Irritated. Until I decided I'm going to get a Xero today.

All I have on hand right now is two boxes of factory 178 ELDX, should be a good starting point.
FYI, factory Barnes 175 LRX was 2765 fps out of my barrel before it was cut.

You'll love the Xero, there's no comparison to a magneto speed.

 

[z987k]

My 30-06 is 20" and I get 2890 and 2840 with two different 175gr bullets. LRX and DRT respectively.

 

[thinhorn_AK]

My 30-06 is 20" and I get 2890 and 2840 with two different 175gr bullets.

what powder?

 

[z987k]

what powder?

RL17.

 

[Burnt Reynolds]

My 30-06 is 20" and I get 2890 and 2840 with two different 175gr bullets. LRX and DRT respectively.

Yeah I don’t reload unfortunately. My family and I are living in our trailer the last 18 months building a house on a 65 acre parcel we bought last year. Suffice it to say - it’s cramped. Even with the enclosed shop section that’s our living room/kitchen/closet/workspace…My treat to myself is buying a press and diving into education when we are finally moved in. I do have 600 yards of steel plates on site that my son and I love…

 

[PLhunter]

I

If a person is cutting to 18” why not just keep going to the legal minimum? Serious question.

I prefer to shoot non-lead so with my losses a reduced velocity results in a reduced minimum impact velocity range. I wasn’t expecting to get the speeds I did out of my hand loads either. So it’s a little bit of both. I would have done 17.5-18.5 were I to do it again. I ended up at 19 due to a miscommunication with the smith.

 

[ACHILLES]

If a person is cutting to 18” why not just keep going to the legal minimum? Serious question.

I’ve ran a suppressed 16” 30/06 for a while now and like it.

My magnetospeed isn't reading velocity with the can on. Irritated. Until I decided I'm going to get a Xero today.

All I have on hand right now is two boxes of factory 178 ELDX, should be a good starting point.
FYI, factory Barnes 175 LRX was 2765 fps out of my barrel before it was cut.

You might try another aux cord, changing battery’s, or getting the wand closer to the bore line. My magneto speed has been great and if it has ever not worked one of those 3 was the issue.

 

[Burnt Reynolds]

I’ve ran a suppressed 16” 30/06 for a while now and like it.

You might try another aux cord, changing battery’s, or getting the wand closer to the bore line. My magneto speed has been great and if it has ever not worked one of those 3 was the issue.

I already got my new toy, I am done fiddling with a muzzle mounted unit, cable, batteries and its morse code simon says button pressing.

I had been planning on a xero for a while and finally found the motivation I needed…not to mention it’ll work with hand guns and my bow.