.223 for bear, mountain goat, deer, elk, and moose.

[Big_wals]

Starline brass, 24g varget, cci450, 2.26".

Do you have an eldm/vld seating stem? I cant fit that much varget in a case at mag length like that without making a pretty substantial dent in the bullet. I loaded a few with 24 grains, they shot fine still but look terrible.

 

[JBradley500]

On a chargemaster, your a patient man!

Gotta have an excuse to hide in the basement for so long.

Do you have an eldm/vld seating stem? I cant fit that much varget in a case at mag length like that without making a pretty substantial dent in the bullet. I loaded a few with 24 grains, they shot fine still but look terrible.

I have the ELDM one and tried to form it to a TMK with some lapping compound and a drill. Still leaves a little ring but nothing significant. Like you say, still shoot good.

 

[Big_wals]

I have the ELDM one and tried to form it to a TMK with some lapping compound and a drill. Still leaves a little ring but nothing significant. Like you say, still shoot good.

Right on. Guess I’ll have to order one.

 

[Kimber7man]

80 grain ELDX. Mature bull moose. 523 yards. Roughly 2,180 impact velocity. Quartering slightly away. Moose was hit once, moved forward 20 feet behind some trees. Before I could shoot again he dropped (less than 5 seconds).

View attachment 763019

The “dreaded shoulder shot” with a “small bullet”…

Entrance.

View attachment 763015

Entered above shoulder bone and tore through lung. Sliced the bottom of the heart on the way through to the exit side lung. Broke two ribs and part of the scalpula before exiting. Both lungs were chunky mush and lung chunks on the ground and tree behind the moose where he was shot.

View attachment 763016

View attachment 763017


Two finger sized wound channel on the entrance side turned into a 4+ finger sized wound channel most of the way through the animal.

View attachment 763018

Congrats!!!

 

[Bert01]

Do you have an eldm/vld seating stem? I cant fit that much varget in a case at mag length like that without making a pretty substantial dent in the bullet. I loaded a few with 24 grains, they shot fine still but look terrible.

Nose ringed 77 TMK’s, you’re just ahead of everyone else! lol

 

[mxgsfmdpx]

Congrats and thanks for the awesome pics! I just bought more of the 80gr ELDM's last week. I'd be interested in the load and rifle.

Thanks.

Factory Hornady 22 Creedmoor Precision Hunter ammo.

Factory Tikka rifle re-chambered to 22 Creed and factory Tikka 8 twist 22-250 barrel cut and threaded.

Rokstok, Maven RS1.2 scope, UM Tikka rings.

 

[mtnbound]

Loaded up a 500 box of 77 TMKs. That's the biggest batch of hand loads I've done so far.
View attachment 763324

How long did this take you?

 

[mtnbound]

80 grain ELDX. Mature bull moose. 523 yards. Roughly 2,180 impact velocity. Quartering slightly away. Moose was hit once, moved forward 20 feet behind some trees. Before I could shoot again he dropped (less than 5 seconds).

View attachment 763019

The “dreaded shoulder shot” with a “small bullet”…

Entrance.

View attachment 763015

Entered above shoulder bone and tore through lung. Sliced the bottom of the heart on the way through to the exit side lung. Broke two ribs and part of the scalpula before exiting. Both lungs were chunky mush and lung chunks on the ground and tree behind the moose where he was shot.

View attachment 763016

View attachment 763017


Two finger sized wound channel on the entrance side turned into a 4+ finger sized wound channel most of the way through the animal.

View attachment 763018

Great job, love seeing the 22CM doing what they do so well.

 

[Thegman]

80 grain ELDX. Mature bull moose. 523 yards. Roughly 2,180 impact velocity. Quartering slightly away. Moose was hit once, moved forward 20 feet behind some trees. Before I could shoot again he dropped (less than 5 seconds).

View attachment 763019

The “dreaded shoulder shot” with a “small bullet”…

Entrance.

View attachment 763015

Entered above shoulder bone and tore through lung. Sliced the bottom of the heart on the way through to the exit side lung. Broke two ribs and part of the scalpula before exiting. Both lungs were chunky mush and lung chunks on the ground and tree behind the moose where he was shot.

View attachment 763016

View attachment 763017


Two finger sized wound channel on the entrance side turned into a 4+ finger sized wound channel most of the way through the animal.

View attachment 763018

Do you have any experience with 77TMKs to compare to the 80ELD-X performance? E.g. penetration and terminal performance along their path? Looks like they performed fantastically at that velocity, which would be within reach for a 223 as far as I typically shoot anyway.

 

[Bluumoon]

Thanks.

Factory Hornady 22 Creedmoor Precision Hunter ammo.

Factory Tikka rifle re-chambered to 22 Creed and factory Tikka 8 twist 22-250 barrel cut and threaded.

Rokstok, Maven RS1.2 scope, UM Tikka rings.

View attachment 763494

View attachment 763495

Out of curiosity, what field position was the moose shot from ?

 

[IDHoundsman]

Thanks.

Factory Hornady 22 Creedmoor Precision Hunter ammo.

Factory Tikka rifle re-chambered to 22 Creed and factory Tikka 8 twist 22-250 barrel cut and threaded.

Rokstok, Maven RS1.2 scope, UM Tikka rings.

What length of barrel are you getting the 3140 fps from?

 

[mxgsfmdpx]

Do you have any experience with 77TMKs to compare to the 80ELD-X performance? E.g. penetration and terminal performance along their path? Looks like they performed fantastically at that velocity, which would be within reach for a 223 as far as I typically shoot anyway.

This is my first big game season with .224 bullets. Results to follow here. Much more to come.

 

[mxgsfmdpx]

What length of barrel are you getting the 3140 fps from?

19”

 

[mxgsfmdpx]

Out of curiosity, what field position was the moose shot from ?

Seated shot to get high enough above the willows and blueberry bushes. Long Spartan bipod up front, bear hug pack for rear support.

 

[JBradley500]

How long did this take you?

I did steps over different days so I'm not really sure. Longer than I anticipated.

 

[dreamingWest]

First Rokstok kill this morning. 77 tmk of course.

 

[Harvey_NW]

Thanks.

Factory Hornady 22 Creedmoor Precision Hunter ammo.

Factory Tikka rifle re-chambered to 22 Creed and factory Tikka 8 twist 22-250 barrel cut and threaded.

Rokstok, Maven RS1.2 scope, UM Tikka rings.

View attachment 763494

View attachment 763495

ES of 61 over 40 shots is beating a lot of peoples precious handloads out there, lol. 3137 out of a 19" barrel with factory ammo is impressive as well, I guess WA having a 24 cal restriction for big game actually just benefited my wallet for the time being because you're making me want one of those REALLY BAD Fantastic job on the bull as well!! That shot placement was absolutely

 

[Thegman]

First Rokstok kill this morning. 77 tmk of course.

View attachment 763557

Your yellow dog looks like he wants credit for the assist... Good boy!

 

[Adam Gibbs]

If anyone's in Michigan, Jay's in Clare had a whole bunch of XBR on the shelf. First I've seen it in stores in years now. $62/lb

 

[Tbone26]

Thanks.

Factory Hornady 22 Creedmoor Precision Hunter ammo.

Factory Tikka rifle re-chambered to 22 Creed and factory Tikka 8 twist 22-250 barrel cut and threaded.

Rokstok, Maven RS1.2 scope, UM Tikka rings.

Awesome, I am going to try some of the factory eldx and eldm. Did you try the ELDM also?

Are those low or medium UM Rings?