.223 for bear, mountain goat, deer, elk, and moose.

Shraggs

WKR
Joined
Jan 24, 2014
Messages
1,589
Location
Zeeland, MI
Is it me, or every few months we have new members jump to the end of this and comment about the inferior choice of a 223/77TMK with what appears not fully reading every single page, the photo evidence and other early non believers who purchased and have since killed with it and commented.

But to come across as an authority (maybe you are, maybe not), recent comments are void of any first hand eye witness of what this bullet does first hand, just references.
Sorry but you can’t legitimately dismiss something you don’t know.

My 77 tmk in my 223 will flat do more tissue damage at 300 yards than my 308 using 165 accubonds at similar ranges. Significantly. Next year photos.
 

chamois

FNG
Joined
Mar 1, 2021
Messages
70
As much as this post opened my eyes and as much as my experience on 20ish deer killed with the 77TMK goes, if I were to shoot an animal that can bite back, I would choose a similar bullet, with similar wounding capabilities, but with a heavier weight and a larger diameter.

I am sure it can be done gently with my 5,6x50R and the 77TMK, it is just that I would choose something larger.
 
Joined
Nov 28, 2022
Messages
749
But to come across as an authority (maybe you are, maybe not), recent comments are void of any first hand eye witness of what this bullet does first hand, just references.
Sorry but you can’t legitimately dismiss something you don’t know.
That isn't anywhere near what was said. Referring to actual authority figures on the subject is different than projecting as one.
My 77 tmk in my 223 will flat do more tissue damage at 300 yards than my 308 using 165 accubonds at similar ranges. Significantly. Next year photos.
Using what metric to measure damage? And apples to oranges anyway using a different bullet. My question is what makes 77 such a magic number that is more effective than other heavy-for-caliber TMK's in heavier weights at the same velocity?
 
Last edited:

fmyth

WKR
Joined
Mar 14, 2019
Messages
1,720
Location
Arizona
Sure , it may kill one, but how badly will you hurt waiting for the bear to realize it’s dead. The latest stuck in the rut has some pretty exciting footage. Three good shots from a 338 rum, Then five more from a 454.
I saw that video. What are your thoughts on the 3 shots from the .338 RUM? I wonder if the shots were too far forward and simply missed the heart/lungs completely.
 
Joined
Feb 25, 2012
Messages
895
Location
South Dakota
I saw that video. What are your thoughts on the 3 shots from the .338 RUM? I wonder if the shots were too far forward and simply missed the heart/lungs completely.

I saw the video as well. On my opinion the 3 shots from the 338 were not good shots. Seems to me like it was not a good angle with the bear being down on the snow. Was kinda hard to tell. The 1 shot from the pistol that was caught on video appeared good and the bear seemed to die pretty quickly after that.


Sent from my iPhone using Tapatalk
 

gbflyer

WKR
Joined
Feb 20, 2017
Messages
1,713
I’d like to see that video. If anyone here is my kin within the second degree, let’s go. I’ll bring the backup (won’t be a 77gr TMK) and some good fast tennis shoes.
 

BjornF16

WKR
Joined
Dec 12, 2019
Messages
2,611
Location
Texas
I saw the video as well. On my opinion the 3 shots from the 338 were not good shots. Seems to me like it was not a good angle with the bear being down on the snow. Was kinda hard to tell. The 1 shot from the pistol that was caught on video appeared good and the bear seemed to die pretty quickly after that.


Sent from my iPhone using Tapatalk
Soooooo...

3 large, poorly placed, rifle rounds didn't kill/slow down the bear; but a single, well placed pistol shot appears to have killed the bear?

Is that a good summary?
 

ztc92

WKR
Joined
May 8, 2022
Messages
335
Using what metric to measure damage? And apples to oranges anyway using a different bullet. My question is what makes 77 such a magic number that is more effective than other heavy-for-caliber TMK's in heavier weights at the same velocity?
I am fairly new to using the 223/77TMK combination myself but have hunted with people who have been using it for years with great success. I have no dog in this fight so am hoping I can offer an outsider’s perspective to answer your question…

My understanding from reading this thread in its entirety and visiting with people who are very familiar with using the 223/77TMK on large game is that it is thought to be a near perfect wound channel out to ~450 yards. What I mean by that (and the answer to your question) is that going to a larger caliber bullet of this style leads to excessive damage and meat loss that many would deem unacceptable if hunting for meat is the goal. I have seen photos of deer nearly split in half despite perfect shot placement due to using a similar style bullet out of a .30 caliber. If I recall correctly the only meat that could be salvaged from that deer was the hindquarters, the rear 1/3 of the backstraps and some neck meat.

From what I’ve gathered, many of those labeled “fudds” on this forum are recommending a larger caliber in order to push larger bullets that actually wound less well than smaller bullets designed for optimal wounding (like the 77 TMK). Early in the thread someone made a comparison to engines and I think it was along the lines of, “223/TMK is like a V6 engine running perfectly while 300WM with traditional hunting bullets is like having a V8 but then removing half the spark plugs so it only performs like a 4-cylinder engine”. Using that analogy, I would add that supercharging your V8 (using TMK style bullets in a 300WM) adds more power to it then the majority of people would desire or find beneficial.

Now if you are asking specifically about dangerous game like bears, then perhaps the excessive tissue destruction that would be produced by a heavier TMK or other similar bullet could be desired by some. Personally, I doubt the bear would be any more dead from a larger caliber TMK but prefer not to bring home a bear rug that looks more like a poncho.
 
Joined
May 6, 2018
Messages
9,603
Location
Shenandoah Valley
Using what metric to measure damage? And apples to oranges anyway using a different bullet. My question is what makes 77 such a magic number that is more effective than other heavy-for-caliber TMK's in heavier weights at the same velocity?


Wound channels are what have been discussed at length here.

It seems it's not soo much the 77 gr is magic, just the construction of the TMK in general, and that it becomes a tremendous amount of overkill in larger calibers like 7 and 30. ELD-M in a lot of gr/cal is not far behind.

If ultimately your goal is penetration, then you might as well use a solid copper. I think the goal should be to balance penetration and wound channel, unless you want to or need to shoot an animal long ways for some reason, the 77 tmk at 2000+ impact for the most part covers what you need for penetration and wound channel.
 
Joined
Nov 28, 2022
Messages
749
I have seen photos of deer nearly split in half despite perfect shot placement due to using a similar style bullet out of a .30 caliber. If I recall correctly the only meat that could be salvaged from that deer was the hindquarters, the rear 1/3 of the backstraps and some neck meat.
Any more details on this scenario?
Contrary to popular belief, most skeptics would also agree that a 30cal magnum is excessive for deer.
 
Joined
Mar 16, 2021
Messages
3,558
Location
Western Iowa
IMO, worrying about meat loss is like worry about scoring a touchdown before you even catch the ball. When I shoot at an animal, I want it dead as quickly as possible, whether I'm trying to fill the freezer or kill a trophy. If that means using a bullet that creates larger wound channels at the expense of meat loss, that's a sacrifice I'm willing to make.

I shot the bull in my profile at 80 yards with a 175 grain Federal TA in .308. The shot was broadside at steep down angle, penetrating high side of near lung down through the full height of the far lung. He dropped to his front knees, stood back up, turned around, and walked about 50 yards before falling for good. I shot a second time just before he dropped, but we didn't find any more holes in him.

The impact velocity was roughly 2500FPS, and the controlled expansion bonded bullet exited and wasn't recovered. Obviously it did the job, but if a 168 grain TMK dropped him dead in his tracks, that would've been my preference. If I knew then what I know now...
 
Joined
Nov 28, 2022
Messages
749
Wound channels are what have been discussed at length here.

It seems it's not soo much the 77 gr is magic, just the construction of the TMK in general, and that it becomes a tremendous amount of overkill in larger calibers like 7 and 30. ELD-M in a lot of gr/cal is not far behind.

If ultimately your goal is penetration, then you might as well use a solid copper. I think the goal should be to balance penetration and wound channel, unless you want to or need to shoot an animal long ways for some reason, the 77 tmk at 2000+ impact for the most part covers what you need for penetration and wound channel.
I've looked through the thread, glassed through much of the silliness, and still have yet to see many pictures that accurately show internal damage that can be inspected. Most are just a bloody hole or skin-off bloodshot meat which isn't much to go off of. Excuse me if I happened to miss it, but has anyone uploaded a video of the 77 on bull elk? That would help change some skeptical minds.
I'm a medium-caliber guy and really don't feel the need to experiment with the small stuff or the monsters, but if there are videos of these working great on bull elk and up I'd love to take the time to watch it.
 
Joined
Mar 16, 2021
Messages
3,558
Location
Western Iowa
I've looked through the thread, glassed through much of the silliness, and still have yet to see many pictures that accurately show internal damage that can be inspected. Most are just a bloody hole or skin-off bloodshot meat which isn't much to go off of. Excuse me if I happened to miss it, but has anyone uploaded a video of the 77 on bull elk? That would help change some skeptical minds.
I'm a medium-caliber guy and really don't feel the need to experiment with the small stuff or the monsters, but if there are videos of these working great on bull elk and up I'd love to take the time to watch it.
Depending on your definition of "small stuff", check out the .243/6mm success thread. If I recall, there are some videos on there of kill shots, and there are definitely a ton of pictures.

https://rokslide.com/forums/threads/6mm-243-hunting-success-on-big-game.284525/
 
Joined
Nov 28, 2022
Messages
749
Depending on your definition of "small stuff", check out the .243/6mm success thread. If I recall, there are some videos on there of kill shots, and there are definitely a ton of pictures.

https://rokslide.com/forums/threads/6mm-243-hunting-success-on-big-game.284525/
Lots of pictures, mostly deer and smaller, no videos. About what you'd expect from 6mm's except for the fella from South Africa.
Like I was saying earlier, none of that looks excessive and 6mm's definitely didn't cause any bruised shoulders or twitches regardless of rifle weight.
Please update when you get a 168TMK in an elk, that's right up my alley!
 
Top