22 ARC

[HandgunHTR]

So, I am wondering. (Dangerous, I know). I think I know the answer, but looking for some collective intelligence here. Also, if this has been covered in the thread already I apologize. I have been reading along, but didn’t go back and reread everything.
The 22 ARC should be a lot easier on barrels in comparison to the 22 Creed, correct?

I am in a bit of analysis paralysis right now. My next build will be a .22 cal and I am torn between a .223AI, 22 Creed, and this one.

 

[wind gypsy]

So, I am wondering. (Dangerous, I know). I think I know the answer, but looking for some collective intelligence here. Also, if this has been covered in the thread already I apologize. I have been reading along, but didn’t go back and reread everything.
The 22 ARC should be a lot easier on barrels in comparison to the 22 Creed, correct?

I am in a bit of analysis paralysis right now. My next build will be a .22 cal and I am torn between a .223AI, 22 Creed, and this one.

H20 Capacities:
223AI: 32.4 ish grains
6.5 grendel: 34.5-35.0 ish grains (should be real close to 22 ARC)
6 Creedmoor: 51 ish grains

So yeah, 22 ARC should be way easier on barrels. There is 22 GT head stamped brass to that's another step up between 22 ARC and 22 Creed and you wouldn't need an odd bolt face.

 

[sportsmans challenge]

So, I am wondering. (Dangerous, I know). I think I know the answer, but looking for some collective intelligence here. Also, if this has been covered in the thread already I apologize. I have been reading along, but didn’t go back and reread everything.
The 22 ARC should be a lot easier on barrels in comparison to the 22 Creed, correct?

I am in a bit of analysis paralysis right now. My next build will be a .22 cal and I am torn between a .223AI, 22 Creed, and this one.

Generally yes

 

[HandgunHTR]

Thanks, gents.

I really do think the 22 ARC will be my next build. Now to decide on an action.

 

[sportsmans challenge]

Thanks, gents.

I really do think the 22 ARC will be my next build. Now to decide on an action.

You like or need an a.r. or prefer bolt action? Either is fairly easy to find.

 

[mjspeers]

For those more knowledgeable than I, a query:

I've ordered a 22ARC barrel, AR platform. I've preferred Lapua, Alpha brass. Haven't had great luck with Hornady. I assume 6.5grendal brass of any make could be used for 22ARC. Given the reamer specs, I'm assuming a FL Redding Type S with appropriate bushing could be used for sizing. But would I need to neck turn? Or am I better off to wait for Hornady's brass. I'm in no real hurry.

 

[HandgunHTR]

You like or need an a.r. or prefer bolt action? Either is fairly easy to find.

It will be a bolt gun.

 

[Jake Leibke]

For those more knowledgeable than I, a query:

I've ordered a 22ARC barrel, AR platform. I've preferred Lapua, Alpha brass. Haven't had great luck with Hornady. I assume 6.5grendal brass of any make could be used for 22ARC. Given the reamer specs, I'm assuming a FL Redding Type S with appropriate bushing could be used for sizing. But would I need to neck turn? Or am I better off to wait for Hornady's brass. I'm in no real hurry.

Who did you order a barrel from?

I heard Alpha was going to make some 22 arc brass.


Sent from my iPhone using Tapatalk

 

[mjspeers]

Who did you order a barrel from?

I heard Alpha was going to make some 22 arc brass.


Sent from my iPhone using Tapatalk

Carbon 6. They said they’re waiting on a PTG reamer at saami specs.

Alpha brass would be awesome.

 

[sportsmans challenge]

It will be a bolt gun.

Howa mini unless you want a larger set up either Midway or brownells had barreled howa minis on sale

 

[sportsmans challenge]

Carbon 6. They said they’re waiting on a PTG reamer at saami specs.

Alpha brass would be awesome.

Maybe you could call p t and g for a reamer print and see if you need to turn. Would hope they have a good neck variance to allow all the different brass makers to play.

I never really had issues with hornady in 22 grendel, yes I pushed it hard and brass would wear out more quickly, but I also was shooting mostly at night and didn't want to worry about picking up expensive brass as much as leaving a few Hornady’s

 

[HandgunHTR]

Howa mini unless you want a larger set up either Midway or brownells had barreled howa minis on sale

I would probably already own one if not for the two-stage trigger. I realize that they are not that expensive, but I hate the fact that I would immediately have to change out the trigger and bottom metal. Even on a Rem, it is only the trigger.
The fact that Stocky’s makes a VG stock for them is a plus, however.

 

[PlumberED]

I really like a two stage trigger, especially when you change the springs. How long do you suppose it will take Tikka to offer a rifle in 22 ARC?

 

[sportsmans challenge]

I really like a two stage trigger, especially when you change the springs. How long do you suppose it will take Tikka to offer a rifle in 22 ARC?

Do they have a grendel sized bolt face yet?

 

[The Guide]

I really like a two stage trigger, especially when you change the springs. How long do you suppose it will take Tikka to offer a rifle in 22 ARC?

Right after they produce a 6mm Creedmoor.

Jay

 

[slickyboyboo]

Carbon 6. They said they’re waiting on a PTG reamer at saami specs.

Alpha brass would be awesome.

Alpha should be making brass, since they already offer a reamer.

 

[slickyboyboo]

Howa mini unless you want a larger set up either Midway or brownells had barreled howa minis on sale

If anyone needs a stock or rings for a Howa Mini, I’ve got some 30 mm Talley LWs, and a B&C Sporter stock I’m wanting to get rid of.

 

[HandgunHTR]

Do they have a grendel sized bolt face yet?

Not that I know of. I believe Sako had a PPC offering at one time. Not sure they still produce them.

 

[ThatDUDE]

Not that I know of. I believe Sako had a PPC offering at one time. Not sure they still produce them.

You can have a smith open up a Tikka .223 bolt face to run the ARC.

Tikka 6MM ARC / 6.5 Grendel

Anyone ever had a Tikka 223 bolt face opened up to accept 6.5 Grendel or 6mm ARC?

rokslide.com

 

[Unckebob]

Do they have a grendel sized bolt face yet?

Yes. They sell a lot of mini actions chambered in 6ARC and 6.5 Grendel.