2025 - any new suppressors to hit the market?

[Brix8984]

UM teasing their suppressor.

 

[Jaegerr]

Yes, that’s the point. For the same dB reduction? Proper reflexed cans are shorter, better balance the rifle (less muzzle heavy), and sound better (tone).




Because a 2” can shows up obnoxiously (to most people) in your FOV through the scope. Super fat cans have their place, but not for the vast majority of hunters or hunting rifles.

I was just contemplating either a Mack Bro’s Zenith or AB Raptor but if UM is coming out with a reflex suppressor I guess I can wait. Any rough ETA?

 

[BasicUtahrd95]

For the over the barrel type suppressors, do you have to match the suppressor to a specific barrel contour, or will can they be installed on any barrel with the correct thread like most US models?

 

[Stocky]

For the over the barrel type suppressors, do you have to match the suppressor to a specific barrel contour, or will can they be installed on any barrel with the correct thread like most US models?

Usually they have an isolator tube that fits over the barrel with a rear bushing fit to the barrel. At least in NZ isolator tubes vary in size and fit any barrel that is smaller in diamter in the reflex section.

 

[swavescatter]

UM teasing their suppressor.View attachment 819678

Can't wait to see the thread on here with Roksliders verifying UM QC on suppressors

 

[Chris_in_Idaho]

Can't wait to see the thread on here with Roksliders verifying UM QC on suppressors

Sign me up.

 

[HingleMcCringleberry]

Sign me up.

Same

 

[MeatInTheFreezer]

Over the barrel, 4 inches added OAL. 10’ish ounces. Very good tone.

@Formidilosus where can I follow the progress or release of this?

 

[wind gypsy]

UM suppressor looks cool. Seems like a lot of baffles stacked close together.

 

[Geewhiz]

UM suppressor looks cool. Seems like a lot of baffles stacked close together.

That's what I was thinking, but if it works..

 

[Formidilosus]

@Formidilosus where can I follow the progress or release of this?

They’ll be a thread.

UM suppressor looks cool. Seems like a lot of baffles stacked close together.

Don’t take that picture as anything final. Just the initial trial has 27 different variations of baffle designs.

 

[MeatInTheFreezer]

They’ll be a thread.




Don’t take that picture as anything final. Just the initial trial has 27 different variations of baffle designs.

Thanks. Will a threaded barrel be a requirement or not?

 

[WyldGoose]

Thanks. Will a threaded barrel be a requirement or not?

Just tape…

 

[CoWapiti]

I just learned about the below, aem5k

Essentially an aem3 with aem5 taper spacing (mk12)

My brain child as of late is a pri mk12 mod h wearing one of these and a 6x super chicken..

View attachment 816400

AEM5K - Allen Engineering

A blend between the AEM5 and the AEM3, the AEM5K features an A-length mount and the shorter AEM3 baffles. This configuration offers a simple swap from a longer A-length can using the same hardware while only being slightly longer than an AEM3. Differences in sound and flash performance between...

www.aesuppressors.com

AE cans are awesome. I've had an AE30 for many years and I have been very happy with it. I was friends with the man who originally machined the prototypes for Phil Seberger of OPS Inc (before Ron Allen got involved). Was pretty cool to look at box after box of prototypes and hear all his old stories about how they designed and tested him. Wish he was still here so I could hear those stories again.

 

[Formidilosus]

I just learned about the below, aem5k

Essentially an aem3 with aem5 taper spacing (mk12)

My brain child as of late is a pri mk12 mod h wearing one of these and a 6x super chicken..

View attachment 816400

AEM5K - Allen Engineering

A blend between the AEM5 and the AEM3, the AEM5K features an A-length mount and the shorter AEM3 baffles. This configuration offers a simple swap from a longer A-length can using the same hardware while only being slightly longer than an AEM3. Differences in sound and flash performance between...

www.aesuppressors.com

The AEM5k is a good can. It’s got more of a “crack” than the AEM5/Ops 12th model- as one would expect.

 

[MeatInTheFreezer]

Just tape…

Thanks. Is there an estimated time for it to hit the market?