Search results

  1. S

    The cartridge for the next 30 years….

    3006. Same as the last hundred years.
  2. S

    Marine tex dye

    You can get pigment from fiberglass composite suppliers.
  3. S

    Freezer Failed

    Good coyote bait at least.
  4. S

    Full Length Size vs Neck Size

    Be careful with shoulder bump. It takes a few firings for the case to be fully formed to your chamber.
  5. S

    Full Length Size vs Neck Size

    You will eventually have to full length size if you reload the cases several times. More than you asked but forester fl sizer is a really good design and the Redding competition shell holders enable you to jam the shell holder against the bottom of the sizing die making die set up a great deal...
  6. S

    Freezer Failed

    I'm sorry this happened to you. I would smell the meat. Don't know how long it was without refrigeration. Is the meat colder than 52 degrees? I don't think refereeing meat hurts it. I freeze my venison that I'm going to grind until I've gotten several deer and grind all together.
  7. S

    Headspace Help Please!

    Put a case in the press and run the ram to its highest point and screw the seater down until you feel the crimping feature touch the case mouth and then back the seater die out a little bit.
  8. S

    22k hornet

    My experience with Lil gun in the k hornet was pressure spikes and poor accuracy.
  9. S

    Anyone have a tricked out .22 pistol they hunt squirrels with.

    I put a leupold 1x4 pig scope on mine and shot off sand bags to see how well it shot. With cci standard velocity I was really impressed. Quarter inch groups at 25 yards.
  10. S

    Anyone have a tricked out .22 pistol they hunt squirrels with.

    Ruger has recently made a run of the ten inch stainless mk iv 22s.
  11. S

    Savage ultralite feeding issues

    Maybe bend the follower spring so that it positions the cartridge properly
  12. S

    S&B lost zero x3

    Send it to be repaired. Tell them it's not holding zero.s&bs customer service is second to none. It will be free of charge.
  13. S

    Balance Beam issues.. RCBS

    I have 2 lyman m5 scales and the hanger and pans are nt interchangeable.
  14. S

    Balance Beam issues.. RCBS

    Are you using the pan and hanger that came with that scale?
  15. S

    Damaged loads question

    2 month old post I know. The bottom of the feed rails in the receiver are scaring the cases and need the sharp corners stoned and polished. The feed ramp also needs to be polished. Might be good to remove the trigger so as to not get metal filings in it. I have an unfired longranger in 300 wm...
Top