Fever Buck
WKR
- Joined
- Jun 21, 2020
- Messages
- 805
What velocities was he getting and what barrelMy gunsmith is hand loading 7PRC with n570 and it’s smokin fast.
Length?
What velocities was he getting and what barrelMy gunsmith is hand loading 7PRC with n570 and it’s smokin fast.
195s at 2900fps with 24”What velocities was he getting and what barrel
Length?
I’ve been playing around with N570 in mine with 180’s and it’s been pretty good. Hit 2860 in my 18” with no ejector marks or stiff bolt lift. Shot great.My gunsmith is hand loading 7PRC with n570 and it’s smokin fast.
I shot the Federal 170 gr terminal ascent, Federal 175 ELDX, and Hornady 175 ELDX today and recorded the average speeds with my Garmin chronograph. I shot 12 rounds of each load. All three grouped well. I was shooting them through a Fierce Mountain Reaper 24” barrel with a suppressor. Velocities are as follows:
Federal 170 gr Terminal Ascent: 3,005 fps
Std Dev: 7.1
Federal 175 gr ELDX: 2,962 fps
Std Dev: 9.0
Hornady 175 gr ELDX: 2,923 fps
Std Dev: 9.3
When breaking in my barre I used the Hornady ELDX and was getting inconsistent velocities with wide spreads, but the average was 2,903 if I remember correctly. I believe the barrel has now sped up a little.
Good idea. All my boxes were bought last year when the ammo first became available.Was this a new box of Hornady ELDX? Seems like we should start tracking lot numbers for the Hornady. I know I have a couple that suck.
Thanks for sharing. Barrel length?Good idea. All my boxes were bought last year when the ammo first became available.
Lot #3230169: 1 box averaged 2,923 fps. I just shot 5 rounds from a second box with the same lot number and it averaged 2,925 fps.
Lot# 3230596: Averaged 2,903 fps with velocities ranging from 2,891-2,947 fps.
Fierce mountain reaper 24” suppressed. My earlier post has more details pertaining to the rifle and ammunition etcThanks for sharing. Barrel length?
Those are great numbers, it's not uncommon to have erratic velocities on a new barrel. I had a Tikka barrel that calmed down over 20fps with the same hand load after 120rds. It's almost as if your barrel matches the Hornady test barrel length and is broken in, the box numbers are right on par . I think people need to ease up on Hornady for the 7 PRC factory ammo, dropping it during a worldwide shit show and component shortage was not optimal, but they seem to be trying the best they can with supporting their cartridges.When breaking in my barre I used the Hornady ELDX and was getting inconsistent velocities with wide spreads, but the average was 2,903 if I remember correctly. I believe the barrel has now sped up a little.
I agree. It hits the sweet spot for people like me. I no longer reload and primarily archery hunt. It gives me the perks of what the 7 mag with heavy bullets is capable of, but in factory ammunition. Hornady should’ve been up front if they’re having issues with securing powder for their ammo etc, but these velocities are right where I’d like for them to be with this particular bullet.Those are great numbers, it's not uncommon to have erratic velocities on a new barrel. I had a Tikka barrel that calmed down over 20fps with the same hand load after 120rds. It's almost as if your barrel matches the Hornady test barrel length and is broken in, the box numbers are right on par . I think people need to ease up on Hornady for the 7 PRC factory ammo, dropping it during a worldwide shit show and component shortage was not optimal, but they seem to be trying the best they can with supporting their cartridges.
I would love to hear what it is doing, please share velocities and powder type/weightDang. You’d hate to hear what my 20” 7saum is doing with 180s and 61 grains of powder.
For sure, and the source for said data.I would love to hear what it is doing, please share velocities and powder type/weight
I think it’s happening for sure, the question is if the alternate powder is preforming as good or not. Very variable but I have a 6.5 PRC as well and I am getting box stayed velocities out of my 26in barrel. Now those are stayed for 24 so they are under performing slightly but much better than the 7PRC ammo that is 150-200 under.Is there any evidence that any of this power swapping and QC issues are impacting other cartridges? I'm near needing another case of Match for my 6.5 PRC.
Not sure if anyone else has tried the nosler but my gun hated it, was out again today to do some more shooting and picked a box up to try. Hornady eldm averaged 2797 fps with a .736 moa 5 shot group and the Nosler while quite a bit faster at 2938 fps averaged a 4.08 moa 5 shot group.Just saw that Nosler announced a loading for the 7 PRC. Can't deny what the market's looking for!
Good luck, your going to need it.Is there any evidence that any of this power swapping and QC issues are impacting other cartridges? I'm near needing another case of Match for my 6.5 PRC.
horizon venatic prc Hornady 22 inch barrel averaging 2805fps with 10 rounds down the barrel.
Bought 6 boxes.
This will be the last time I support Hornady.