What recipe for 270win t3x superlite barnes 129gr lrx

Tuby27

Lil-Rokslider
Joined
Feb 8, 2021
Messages
115
Just got a tikka t3x 270win superlite. Anyone care to share their recipe using barnes LRX 129gr. I have the following to use:
Primers: fed210m, cci200, cci250
Case: hornady, Norma, Winchester
Powders: h4350, superformance, hybrid 100v, h4831sc

Thanks
 

handwerk

WKR
Joined
Jun 14, 2013
Messages
1,929
Location
N.E. Mn. / Mt.
I load that bullet for several 270's, I use fed. 210 and of the powders you have I'd start with H4831SC, I think my load settled in at 59g.
 
OP
T

Tuby27

Lil-Rokslider
Joined
Feb 8, 2021
Messages
115
Not sure If it’s just mine but of all the powders I have, h4831sc Is the slowest in velocities and even with higher amounts of grains used. Accuracy is similar to the others but slower fps.
 
OP
T

Tuby27

Lil-Rokslider
Joined
Feb 8, 2021
Messages
115
My highest velocities with lower powder grains come from superformance and hybrid 100v.
 

NoWiser

WKR
Joined
Aug 15, 2013
Messages
708
I didn’t have much luck with the 129 lrx in my Tikka. The 130 ttsx is a different story. I stuck with the ttsx.
 

JFK

WKR
Joined
Sep 13, 2016
Messages
848
Barnes suggests 100v for that bullet/caliber. I’d start there if you have it. I’ve had good luck with Barnes and H4350 in my 270 too, but not with the LRX.
 

452b264

Lil-Rokslider
Joined
Nov 11, 2018
Messages
264
Location
AZ
I have used the LRX, fed. 210, H 4350 with great results. The load data is available on Barnes website.
 
OP
T

Tuby27

Lil-Rokslider
Joined
Feb 8, 2021
Messages
115
How much jump? I think recommended starting is .05 off the lands. Anyone with the same rifle and load use a specific jump? Just trying to save some time and money. Thanks
 
Top