What did you do in the reloading room today?

[Pickettpuncher]

Been busy around my place. Trying to find a load for the rokslide special 223 and got supplies in to work on 25cm. Just need a barrel for the cm

 

[sierracharlie338]

Been busy around my place. Trying to find a load for the rokslide special 223 and got supplies in to work on 25cm. Just need a barrel for the cm

Nice I’m about to do the same. My barreled action is being spun at the smith now for a 25cm and I’m about to order my kiddo a RSS in compact and start loading for that!

 

[sierracharlie338]

Over the last couple of weeks I've loaded 200 each 40 S&W and 10mm. 70 308 w/Starline srp brass, 100 6.5 CM w/130 TMK. Wet tumbled a lot of brass in preparation of selling. All in the interest of move this spring. Also ordered a new .223 yesterday.

I have a large lot of Hornady 6.5 CM brass if anyone is interested.

Let me know how you like those 130tmks I may be making the switch to them in my 260

 

[Pickettpuncher]

Nice I’m about to do the same. My barreled action is being spun at the smith now for a 25cm and I’m about to order my kiddo a RSS in compact and start loading for that!

What action and barrel are you using

 

[MHWASH]

Let me know how you like those 130tmks I may be making the switch to them in my 260

Will do! May have to wait until fall though. Taking my .308 spring bear hunting this year.

 

[sierracharlie338]

What action and barrel are you using

Defiance classic and Brux rem varmint in 7.5 twist

 

[sierracharlie338]

Will do! May have to wait until fall though. Taking my .308 spring bear hunting this year.

yeah no worries. I have 300 140 elite hunters to burn through before I decide if ill keep the barrel on or switch to a 6mm cartridge.

 

[MHWASH]

Loaded 50 of these to shoot more of these.

 

[sierracharlie338]

Love a good 22-250 with heavies! Thats awesome

 

[sierracharlie338]

Got some more 105s loaded up and will see how consistent of a powder charge I found. Got some 106s loaded for a little more testing at two different seating depths.

 

[eaglemountainman]

I have 100 rnds of 7-08 brass in the wet tumbler as I type.
I have 23 Hammer 132HHTs left. If I can't get them to tighten up this Friday, I'm giving up on them.

 

[sierracharlie338]

I have 100 rnds of 7-08 brass in the wet tumbler as I type.
I have 23 Hammer 132HHTs left. If I can't get them to tighten up this Friday, I'm giving up on them.

What kind of groups are you getting?

 

[Mike D Texas]

I have 100 rnds of 7-08 brass in the wet tumbler as I type.
I have 23 Hammer 132HHTs left. If I can't get them to tighten up this Friday, I'm giving up on them.

I gave up on Hammers a while ago. I have a 260 AI that will hold 1” 10 round groups with 147 ELDMs but shoots 3”+ with 129 Absolute Hammers.

Ive tried different powders, seating depths, neck interference and I just can’t get them to shoot.


Sent from my iPad using Tapatalk Pro

 

[49ereric]

Fire forming the old fashion way today with 7mm mag to 8mm/338.
i was give 22 7mm mag shells some factory but most reloads.
fire forming the factory loads as is but the reloads i will pull down and anneal first.
primers were backing out so pressure must be quite low.

 

[Juan_ID]

trimmed and primed some 223 brass that came out of the tumbler then sized some 6.5 creed to toss in the tumbler.

 

[sierracharlie338]

So shiny!!

 

[FB Trout]

Loaded up a bunch of .45 Colt ammo, mostly plinking ammo for a single action Pietta SAA replica. 250 grain flat nose Berry bullets in Starline brass with 5.0 grains of Titegroup.

 

[wyosam]

Loaded pressure ladders with hammer HHTs for my 257 Rob improved and 7-08 improved. Hopefully it’ll warm up a little Monday to see how they shoot.


Sent from my iPhone using Tapatalk

 

[Ranger 692]

Tumbling 7mm-08, will load 10 to double check my range results from Friday with 3 shot ladders. I’m thinking I’ve finally found my hunting load. Just got in 400 primed Norma for the RSS pretty cheap so gonna load up 100 or so 77TMK for the kids.

 

[Mike D Texas]

Cleaned a couple of rifle barrels, throated my 22-250 AI barrel to run 88ELDMs seated properly and stared loading for that.

Working on some 260AI loads tomorrow.


Sent from my iPad using Tapatalk Pro