What did you do in the reloading room today?

[sierracharlie338]

Some 25 Killmore goodness…

 

[jjohnsonElknewbie]

Did you every test these? My 7mm08 X Bolt that seems to shoot just about everything really good, shot 162s over SB 6.5 into a 4 inch group at 100 yards.

Sent from my SM-G990U using Tapatalk

I have 20 loaded and ready to test. Hopefully this week.

I shot 20- 150 Fusions over 48.5 gr SB 6.5 a couple days ago and got great results.

Checked/set zero with first 2 groups (bottom middle- .5 mils right, top right- .1 mils right) and then shot 14 to establish cone (top middle).

 

[waspocrew]

Sized, trimmed, chamfer/deburr, and primed 150 pieces of 338 RUM.

Brass prep is a pain.

 

[waspocrew]

My uncle sent me this the other day. Felt it was fitting:

 

[jjohnsonElknewbie]

lol!

 

[sierracharlie338]

My uncle sent me this the other day. Felt it was fitting:

View attachment 742425

That ain’t no freaking lie. I LOATHE that part.

 

[jjohnsonElknewbie]

That ain’t no freaking lie. I LOATHE that part.

I bought an all-in one case prep center from Frankfort Arsenal and it takes a lot of the headache out.

 

[sierracharlie338]

I bought an all-in one case prep center from Frankfort Arsenal and it takes a lot of the headache out.

One of those type of things is in my near future for sure

 

[jjohnsonElknewbie]

One of those type of things is in my near future for sure

This is the one I bought.

https://www.amazon.com/Frankford-Ar...ix=frankford+arsenal,sporting,119&sr=1-3&th=1

I know Hornady and RCBS both sell all in one case prep centers as well.

 

[sierracharlie338]

This is the one I bought.

https://www.amazon.com/Frankford-Arsenal-Platinum-Hardened-Scrapers/dp/B00HS7JEB4/ref=sr_1_3?crid=3TW23LRBKMPPD&dib=eyJ2IjoiMSJ9.-ZxP38EHsi6TCAmaeCi08TxXT8GAZVeHcxJePauoZT1fee_CMex54Fe0gJOBE5AezHmx3vdGg3yvj_Tq49xU33tgihnzUtsSgsdHSoqfVPHKazCILHSqZ3nMAPi-Z0GhjoaLzEsNju8yRny-Ce7ULhOiHX5tcAS4rcT_vtXrHDk2vuk_-2uDb9spMyLpomm9a-txKuYq4uoeLgSDqdc04papJ1lSuKxZ5HZJPEHBJMP2IExrN0OiSYSxXOSRymXDlhlBy8ACAl9QKYXRKTlNymzCQDyu2jl6qRv5OHAPdTQ.lmi_ovoU1Q74JuKnKwxZ87vdNS9El_e7NsPUk5Uvy2o&dib_tag=se&keywords=frankford+arsenal&qid=1722282647&s=sporting-goods&sprefix=frankford+arsenal,sporting,119&sr=1-3&th=1

I know Hornady and RCBS both sell all in one case prep centers as well.

Seems they have really upped their game from the products they used to sell. Looks like a nice piece of kit!

 

[BossGobbler2024]

Loaded up some 7 PRC rounds with H1000 and 175 gr ABLR to test this weekend. Plus cleaning guns from this past weekend and cleaning more brass and getting it ready for the next cycle.

 

[jjohnsonElknewbie]

Loaded up some 25-284 rounds with H1000 and 134 ELDMs for pressure testing. Hoping to test pressure today and roll 20 later to see how they shoot.

 

[Slick8]

Good to see this thread. I'm digging all my gear out as it's been locked up for 2 weeks of grand children visits.

I have 50 rounds and 338 Edge to prep then start running some ladder test. I ran these 50 for fun to well season everything with a mild load and 300 SMK's. Very impressive results for plinking rounds. Really excited to run a ladder on some 300 Bergers and 265 Lasers.

 

[Torque]

One of those type of things is in my near future for sure

Take a look at the Lyman version. I have used it for years. It makes prep so much faster.

 

[Tx270WT]

Pulled out brass and perused data for my first ladder I’m going to try in the new 300 wby

 

[Nine Banger]

Looked at my 6.5 PRC reloading equipment which always reminds I don't have a 6.5 PRC yet.
LOL

I'm waiting on a 6.5 PRC to arrive for our moose hunt. I'm planning to send a 147gr ELD.

I picked up H1000 and N565 to try right off the rip.

Loaded the N565 a few days ago and set up some H1000 tonight:

I have these set up for when it gets here to find pressure w/ 1ea of both powders at 56-56.5-57-57.5-58-58.5 and 59 @ 2.955 OAL.

 

[grfox92]

I bought an all-in one case prep center from Frankfort Arsenal and it takes a lot of the headache out.

I'm going to have to go this route. I absolutely hate case prep lol.

Sent from my SM-G990U using Tapatalk

 

[SloppyJ]

I bought an all-in one case prep center from Frankfort Arsenal and it takes a lot of the headache out.

Have you found any good replacement heads for the cutter or the duburring part? After about 600 cases trimming and deburring is super slow for me.

 

[SloppyJ]

Prepped another 100rds of new peterson 6creed brass for my first match this weekend.

Loaded 125rds at 40.2gr of H4350 with 108eldms.

I'm so glad I bought the FA intellidropper and powered case prep center. Still took a bunch of time but a lot less than it once did.

I ran out of 4350 and had to go out and pick up another pound at basspro. At that point they had me for $67.99. I've been wanting to try the VV powders for a long time so I ordered some N570 for my 300prc and N555 for my 6 creed. It's not much cheaper but I hit pressure early with the peterson 6creed brass so I figured that might help too.

 

[jjohnsonElknewbie]

Have you found any good replacement heads for the cutter or the duburring part? After about 600 cases trimming and deburring is super slow for me.

I've not had any issue yet, and I've probably worked around 400 cases so far. However, I'll look around and see what's out there for it. I assume you can get replacements from FA.

I didn't see any replacement heads on the FA site. I emailed them and asked if they sell them.