UM/S2H/Suppressors/Scopes and More!

[Plague]

I'm referring to the UM specifically

I think they were making a joke. Referring to them cutting a Q can and showing the guts to the world. Kevin is such an insufferable shitbag of a human. At least that’s the image he projects to the world.

 

[HighUintas]

I have a .375 Raptor 8...I'm interested in a shorter/lighter can for backcountry.

I was contemplating getting a Raptor 4 in .223 and using it on my 6XC (and soon to have 6UM) as well as .223/22CM.

I'm guessing that the UM can will end up slightly quieter than the Raptor 6 and definitely quieter than the Raptor 4.

I'm thinking I'll sit on my hands for a bit longer and go with the UM can.

Form said a while back that a raptor 6 with a reflex would be quieter by quite a few decibels than the um suppressor, although I don't know if he was just talking about the version they did testing on so far or if he was referring to the end product.

I was thinking the 556 version of a raptor 4 or 6 with a 4-in reflex would be pretty quiet on a 6 mm cartridge. If you look at the wolf Hunter testing results in the summit on the 556, it's likely just as quiet or quieter than the nomad tie XC on 556. The muzzle value is better, and the shooter's ear is just a little higher, but if you look at the graphs it's very likely because there's more back pressure causing a louder port pop on that particular gun.

Since the um can is 3D printed, I'm kind of hoping they offer 556 or 6 mm bore version right off the bat so that it's optimized for a smaller bore rather than 30 cal.

 

[JGRaider]

Since this new UM can is first and foremost a hunting gun can, I'm surprised their target for performance isn't the AB 8/reflex setup. They seem content that the AB8 is quieter.

 

[walk2112]

I have a .375 Raptor 8...I'm interested in a shorter/lighter can for backcountry.

I was contemplating getting a Raptor 4 in .223 and using it on my 6XC (and soon to have 6UM) as well as .223/22CM.

I'm guessing that the UM can will end up slightly quieter than the Raptor 6 and definitely quieter than the Raptor 4.

I'm thinking I'll sit on my hands for a bit longer and go with the UM can.

I didn’t realize the 556 AB bore/aperture size was big enough to accommodate 6mm, have you seen this done or shot 6mm through an AB 556 can? Not calling BS, just interested in maybe getting one myself for 22 and 6mm uses.

 

[Harvey_NW]

Since this new UM can is first and foremost a hunting gun can, I'm surprised their target for performance isn't the AB 8/reflex setup. They seem content that the AB8 is quieter.

Because they've explained multiple times they're going for tone, not just suppression.

 

[NDHUNTER24]

I may have missed it but did they mention how many cans they can produce in a day? or what there machine could be capable of?

 

[BjornF16]

I didn’t realize the 556 AB bore/aperture size was big enough to accommodate 6mm, have you seen this done or shot 6mm through an AB 556 can? Not calling BS, just interested in maybe getting one myself for 22 and 6mm uses.

After seeing some posts of people stating this very same, I contacted AB directly and received confirmation

 

[Cameron.25]

I didn’t realize the 556 AB bore/aperture size was big enough to accommodate 6mm, have you seen this done or shot 6mm through an AB 556 can? Not calling BS, just interested in maybe getting one myself for 22 and 6mm uses.

I just got in a raptor 6 in 22 bore with a 4" reflex couple days ago, havent shot it yet but planned to try it on my 22cm. Looks like their 22 bore will definitely fit 6mm pills through it, didn't put calipers on it and doubt they recommend it over a 6.5 bore but it seems to have plenty of room so I'll probably try this out on my 6mm PRC for science

 

[ElPollo]

Since this new UM can is first and foremost a hunting gun can, I'm surprised their target for performance isn't the AB 8/reflex setup. They seem content that the AB8 is quieter.

The AB Raptor is a great can and, I think it is hard to beat for dB and tone. It sounds like the UMS can is supposed to be shorter and lighter. If I remember correctly, my Raptor 8 stack with a 3” reflex is about 10 oz. Seems like that is about the target weight that UMS is shooting for. It may be shorter than the Raptor, but it likely won’t be quieter or lighter. Maybe the other benefit for some will be that the UMS can won’t have the sex toy ribs on it that the Raptor has. Dunno. I will likely wait and see how the new can performs before putting down my coin. What they are suggesting is interesting, though.

 

[ElPollo]

@Formidilosus and @UM GM

First off, you don’t necessarily have to answer this. It’s intended to be food for thought on the suppressor design.

The reflex on the AB can I have is a simple expansion chamber. Given that you are 3-d printing this new can, have you considered adding any structure inside the reflex to direct and therefore slow down the gasses? Seems to me that AB has shown that baffles are more efficient at reducing muzzle blast and noise than their reflexes. Makes me wonder if small “pseudo-baffles” or spirals in the reflex could be used to slow down gasses moving out of the reflex and through the baffles.

 

[SteveAndTheCrigBoys]

I think they were making a joke. Referring to them cutting a Q can and showing the guts to the world. Kevin is such an insufferable shitbag of a human. At least that’s the image he projects to the world.

Yep, might have been more obscure of a reference than I thought. Here’s a link @HighUintas. I thought it was an entertaining read.

 

[omicron1792]

Because they've explained multiple times they're going for tone, not just suppression.

I think it’s more the raptor 8 is 6.5” in front of the barrel. They are shooting for 4” in front of the barrel. So no way they can compete if just comparing dB reduction.

 

[JGRaider]

I think it’s more the raptor 8 is 6.5” in front of the barrel. They are shooting for 4” in front of the barrel. So no way they can compete if just comparing dB reduction.

I agree, don't see how they can. Only adding 6.5" to the barrel length is a huge positive IMO, given modern day short suppressors and K-cans add about the same. All the while you are getting the outstanding suppression and tone of the AB8 which is far superior to short cans.

 

[omicron1792]

I agree, don't see how they can. Only adding 6.5" to the barrel length is a huge positive IMO, given modern day short suppressors and K-cans add about the same. All the while you are getting the outstanding suppression and tone of the AB8 which is far superior to short cans.

I love mine for sure.