Ultralight Ultralight Rifles

[passinggas33]

Anybody in the Christmas spirit and have an extra Shaw 223 Wylde that they want to sell me? I’ll make it worth your while

 

[Taudisio]

I've just been using a thin red grease for a chainsaw sprocket, on pretty much all my rifles. Seems to work fine. I'd think a thin moly grease would probably be about the best.

Since they're not gassers, nothing really gets dirty from rounds, just from mucking around in the woods. If I see debris in the action, I'll pull it apart, wipe and re-grease, otherwise it's good to go for who knows how long.

I can’t tell you how many rounds I have down the rifle without cleaning or re-greasing it. It’s a few hundred for sure.

 

[Taudisio]

I put it my request for a 6x45 version of the portless barrel from Shaw. If anyone else would be interested in one here is a LINK. The squeaky wheel always gets the oil!

 

[Thegman]

I put it my request for a 6x45 version of the portless barrel from Shaw. If anyone else would be interested in one here is a LINK. The squeaky wheel always gets the oil!

I think if anyone gets that done, it might be Shaw.

 

[C Bow]

I put my request in for the third time

 

[Trackselk]

Anybody in the Christmas spirit and have an extra Shaw 223 Wylde that they want to sell me? I’ll make it worth your while

PM sent

 

[packgoatguy]

Three shot group with the little 2lb-er, 200 yard gong. (Bottom hit was my 15 year old son's shot).

 

[Trackselk]

Three shot group with the little 2lb-er, 200 yard gong. (Bottom hit was my 15 year old son's shot).

12" gong?

 

[packgoatguy]

12" gong?

10 inch

 

[packgoatguy]

For those who have communicated with Shaw Barrels in the past... does anyone have good contact there? would they do "one off" custom AR15 barrels? I'd be looking for a portless 10 or 12 inch 223wylde just like their 16 inch ones... but I've never been able to get through when I've tried their number or email on their website.

 

[KyleR1985]

Merry Christmas everybody. Hopefully Santa says UL UL UL under the tree this year for you!

 

[StupidLightweight]

Merry Christmas, nut jobs!

 

[StupidLightweight]

For those who have communicated with Shaw Barrels in the past... does anyone have good contact there? would they do "one off" custom AR15 barrels? I'd be looking for a portless 10 or 12 inch 223wylde just like their 16 inch ones... but I've never been able to get through when I've tried their number or email on their website.

You’d be wasting your money for this custom barrel. Buy a 1:8 20-inch A1 barrel and lop it off midway down the gas block journal. Thread it and you’re done. Voila! If you’d like less weight, have it turned down.

 

[passinggas33]

Want to buy myself for Christmas one of those neoprene sleeves for my Burris Microprism. Can’t seem to find the link in this thread now (looked through about 1/2 the thread ). Anybody have the Amazon link they could share with me?

 

[ezwy]

Want to buy myself for Christmas one of those neoprene sleeves for my Burris Microprism. Can’t seem to find the link in this thread now (looked through about 1/2 the thread ). Anybody have the Amazon link they could share with me?

Amazon.com

 

[passinggas33]

Amazon.com

Thank you!!! I had found the same one earlier googling Amazon but they wanted $20 for it and remembered it being half the price. So instead I spent two precious hours surfing the web to save $10.

 

[passinggas33]

I put it my request for a 6x45 version of the portless barrel from Shaw. If anyone else would be interested in one here is a LINK. The squeaky wheel always gets the oil!

Added another request from me…

 

[passinggas33]

Has there been a consensus on which magazine works best with the Solo 300 or is maybe the lightest to accompany these ULs?