Ultralight Ultralight Rifles

[Welldone]

Ok ok, I know that I’m just dreaming,but……… What about a .410 shotgun ULUL. anybody done that yet?

 

[ACHILLES]

The Rossi Tuffy 410 single shot is 2.95lbs

 

[Ferrulewax]

The Rossi Tuffy 410 single shot is 2.95lbs

yep. throw a small red dot on and its gtg. I have also considered purchasing the "kids" tuffy rifle and having it threaded for a choke tube. That would cut off about 8" and probably a couple of ounces. In the end I decided it probably wasn't worth it. If you want it even lighter then don't use the stock LOP extention, but it's going to be cramped

Just looking at my spreadsheet, the tuffy turkey with a riton optic and a very lightweight sling (probably 2.5 ounces total in additions) is 59.4 ounces on my scale.

Per Rossi Website:
Tuffy Turkey: 58.8oz

Tuffy (regular): 47.2 oz

Rossi Brawler: 36.8 oz

 

[KyleR1985]

I have a 6x45 handi in process. It won’t be ULUL…

But it got the wheels turning on getting there. This doesn’t include 6-7 ounces for a stub. But with that, microprism, and some lightening of things, bet I can be under 4.5 all in.

 

[ACHILLES]

yep. throw a small red dot on and its gtg. I have also considered purchasing the "kids" tuffy rifle and having it threaded for a choke tube. That would cut off about 8" and probably a couple of ounces. In the end I decided it probably wasn't worth it. If you want it even lighter then don't use the stock LOP extention, but it's going to be cramped

Just looking at my spreadsheet, the tuffy turkey with a riton optic and a very lightweight sling (probably 2.5 ounces total in additions) is 59.4 ounces on my scale.

Per Rossi Website:
Tuffy Turkey: 58.8oz

Tuffy (regular): 47.2 oz

Rossi Brawler: 36.8 oz

Would be a great carry quail gun for me.

 

[ezwy]

For those who have done the gas block backwards, does it block all of the gas? Or should I be looking at getting a tap and screw?

 

[Taudisio]

For those who have done the gas block backwards, does it block all of the gas? Or should I be looking at getting a tap and screw?

Not speaking for everyone, but I have some carbon that leaks out of mine.

 

[Tailwind5sw]

I used a piece of 3/4od 5/8 id 4130 tube. Slid it it on the gas block seat wet with high temp paint. Has not leaked in 50 rounds.